RECHARGEABLE
WINE OPENER
MD-WORCSS6
Package contents
• Wine opener • Foil cutter
• Base • Quick Setup Guide
Features
Release button
Extract button
Stainless
steel case
LED
Foil cutter
Base
Before using your new product, please read
these instructions to prevent any damage.
QUICK SETUP GUIDE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed including the
following:
READ ALL INSTRUCTIONS BEFORE USE
1 Do not operate the electric wine opener with a
damaged cord or plug, after the appliance
malfunctions, or if it is dropped or damaged in any
manner. Return the appliance to the nearest
Authorized Service Center for examination, repair or
electrical or mechanical adjustment.
2 To protect against the risk of electrical shock, do not
put the electric wine opener in water or other liquid.
This may cause personal injury and/or damage to
the product.
3 To protect against fire, do not operate the electric
wine opener in the presence of explosive and/or
flammable fumes.
4 Do not use the electric wine opener for other than
its intended use.
5 This product is intended for normal domestic
household use only.
6 When using or recharging the electric wine opener,
keep your workspace clean and free from potential
hazards.
7 For indoor use only. Do not expose the electric wine
opener or changing unit to rain or other extreme
conditions.
8 Never force the electric wine opener onto a bottle
or attempt to speed up the mechanism. The electric
wine opener works best when it is operated at its
intended speed.
9 Do not touch or adjust the electric wine opener’s
mechanism or the corkscrew spiral . Only hold the
electric wine opener by its housing.
10 Do not attempt to open bottles if the switch is not
working correctly.
11 Do not attempt to open the electric wine opener. It
has no user-serviceable parts.
12 Never remove the plug from the socket by pulling
the power cord.
ATTENTION: The corkscrew is sharp. Handle
carefully. Keep hands and utensils out of the wine
opener while operating to prevent the possibility of
severe personal injury and/or damage to the
product or property.
Charging your electric wine opener
Plug the output (DC) end of the AC adapter
into the back of your electric wine opener
and the other end into a standard 120V AC
wall outlet. The LED turns on, and your wine
opener starts charging. It takes
approximately 16 hours to fully charge your
electric wine opener the first time. After
that, charging will take 10-11 hours. The
charging circuit will shut off automatically
when battery is fully charged.
Using your wine opener
1 Make sure your electric wine opener is
charged. Follow the instructions for
charging above.
2 Remove the foil around the
top of the wine bottle using
the foil cutter provided.
3 Place the electric wine
opener on top of the wine
bottle.
Note: Make sure that it
remains as upright as possible
at all times. If held at an angle,
the electric wine opener will
not remove the cork properly.
4 Hold the electric wine opener firmly and
press the Extract button. The corkscrew
turns in a clockwise direction and enters
the cork, gradually removing it from the
bottle. When the electric wine opener
stops, the cork has been fully removed
from the bottle and you can lift the
electric wine opener away.
5 To remove the cork, press
the Release button. The
LED turns on and the
corkscrew reverses
direction, releasing the
cork.
6 Always return the electric wine opener to
the base when you are finished with it to
protect the mechanism while it is not in
use.
Specifications
• Opens 30 bottles when fully charged
FCC Statement
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
FCC Caution
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
maybe cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different form that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
One-year limited warranty
Contact Modal:
For customer support, call 1-800-499-3402
(U.S. and Canada)
www.bestbuy.com/modal
MODAL is a trademark of Best Buy and its affiliated
companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
V3 ENGLISH 15-0764
Loading...