Mitsubishi VS-50XLF50U, VS-50PH50U, VS-50XL50U, VS-67XL50U, VS-50XLW50U DATASHEET

DLP™ Display Wall Cubes:
Huge Advances in Display Technology.

Display Wall at T-Com’s Network Operation Center in Stuttgart

Large images have

never been so bright.

Display Cubes:

new standards in picture quality.

Anywhere up-to-date, precise visual information is needed,

display cubes are the first choice. In control rooms, surveillance

systems or information boards the latest Mitsubishi technology

guarantees the best image quality along with easy operation

and high flexibility. All Display Cubes show their strengths equally,

whether used as individual units or arranged in a display wall.

With a brightness of up to 1000 cd/m2 (bright mode), XGA or

SXGA+ resolution and a contrast of up to 1600:1, Mitsubishi

Display Cubes stand out even in daylight environments. And

when you don’t need the full brightness power, you can switch to

normal mode, to the benefit of the lamp’s service life. No need to

worry that so much brightness will leave its mark on the screen:

even in the case of long-term static images, DLP™ technology

prevents burn-in and image retention.

Improved contrast ratio:
up to 1600:1

No burn-in effectBurn-in effect

Previous contrast ratio

The new Display Cubes

make excellent team players.

No more color differences or inconsistent brightness in images

shown across several display cubes. The digital Color Space

Control circuit compensates for color and brightness discrepan-

cies. And Dynamic Brightness Balancing ensures that brightness

remains uniform, even over a longer period of operation.

After a lamp change, the Smart Lamp System recognizes the

brightness of the new lamp and the Display Cubes automatically

match their brightness with the others. The status of each Display

Cube is always in view: the front LED status display not only

instantly informs you of a problem, it also indicates ways to

solve it.

Without Color Space Control

With Color Space Control

Intelligent design – intelligent user interface.

Space-saving technology.

Based on an optimization of the optical system, a shorter pro-

jection distance has been achieved. In combination with the

Display Cubes’ rear projection technology, this has greatly

reduced the depth of the units.

Technology highlights without reflections.

Mitsubishi screens minimize spurious reflections. The use of a

new coating gives the Display Cubes an extremely sharp, high-

contrast picture with unexcelled brightness uniformity. The

viewing angle has also been improved, making the picture visible

even from extreme angles. And screen-to-screen gap widths

of just 1 or 2 mm respectively guarantee you multiple-display

projections with constant brilliance and hardly noticeable

breaks.

VS-50XL50U/ VS-50PH50U

VS-67XL50U/ VS-67PH50U

You decide how big your Display Cube should be: 50 or

67 inches. This gives you maximum flexibility when installing

individual Display Cubes or a display wall.

Naturally, the VS-67XL50U has the same excellent character-

istics as its little brother.

VS-50XL50U (50", XGA resolution)

The 50-inch basic model.

Experience natural color characteristics across the full display.

The 12-bit dither circuit guarantees smooth images and truly

natural gradation. Perfect rendering of both bright and dark

areas produces precise halftones.

Sometimes what you don’t see is just as important: cabling

ducts on the rear side enable easy wiring during installation

and maintenance.

VS-67XL50U (67", XGA resolution)

When size does matter: the full 67 inches.