Mitsubishi P93E OPERATION MANUAL

Meeting the high demands of medical documentation. Fast,
precise and at the same time very efficient. This is the stan­dard the new analogue b/w video printer has set itself. 256
grayscales and a 325 dpi resolution guaranty the truly de­tailed, contrast rich printing of patient pictures. And this in
speedy 3.9 seconds. At the same time the picture memory
of the P93E delivers up to 10 frames, which can be
individually selected. Free choice is also available over the
adjustments. The P93E can print specific parts of the image.
You can print in increments of 0.1 and set the picture en­largement scale from 0.5 to 2.0. To control the brightness
and contrast, there are 39 steps available to you (from –19
to +19). Convenient too: All picture corrections are adjust­able using the control switches on the front panel, and are
also shown by an LED indicator.

Substantial performance in a compact size. Clearly smaller
than its predecessor and weighing just 2.8 kg, the P93E is
also intended for applications in mobile equipment.

• User-friendly settings with control switches and an
LED indicator

• High-resolution thermal head with 325 dpi

• Extremely compact dimensions and lightweight design

• Fast print speed

• 7 different picture formats

• Picture memory for 10 individually selectable frames

P93E

Let’s go into more detail

on

picture quality.

Mitsubishi Electric Europe B.V. • German Office • Electronic Visual Systems • Gothaer Straße 8 • D-40880 Ratingen

Tel.: [phone] • Fax: [phone] • www.mitsubishi-evs.de

Model P93E

Print Method Thermal-sensitive
Resolution Printhead 325 dpi (12.8 dots/mm), max. resolution 1280 x 600 dots (PAL/Normal)
Color Depth 256 grayscales
Print Speed/Picture Normal: 3.9 seconds (PAL/Underscan)

Normal 2 split: 3.9 seconds (PAL/Underscan)
Side: 8.4 seconds (PAL/Underscan)
Side 2 split: 4.2 seconds (PAL/Underscan)
1:1: 5.0 seconds (PAL/Underscan)

1.7-times: 10.6 seconds (PAL/Underscan)

2-times: 11.6 seconds (PAL/Underscan)
Paper Size Thermal paper roll, 110 mm wide
Print Area Normal: 100 x 75 mm (PAL/Underscan)

Normal 2 split: 50 x 37 mm (PAL/Underscan)

Side: 99 x 133 mm (PAL/Underscan)

Side 2 split: 47 x 63 mm (PAL/Underscan)

1:1: 100 x 100 mm (PAL/Underscan)

1.7-times: 100 x 227 mm (PAL/Underscan)

2-times: 100 x 266 mm (PAL/Underscan)
Picture Enlargement 0.5 to 2.0
Picture Memory 10 frames
Interface BAS/FBAS (Composite), BNC connector for input and output
Special Features 39 steps for contrast and brightness, paper-saving function, 5 different gamma curves, selectable

print area by expansion, negative print, reversed print direction, multiple copies
Power Supply 220–240 V, 50/60 Hz; 100 –120 V, 50/60 Hz
Power Consumption approx. 115 W during printing, approx. 10 W in stand-by
Dimensions (W x H x D) approx. 154 x 90 x 256 mm
Weight approx. 2.8 kg
Approvals TÜV-GS/GM, CE (LVD, EMC, MDD)
Accessories (incl. in delivery) Power cable, wire remote control, cleaning paper, thermal paper KP65HM-CE, BNC-signal cable,

operation manual

(The right to make technical changes is reserved; no liability is accepted for printing or other errors)

P93E

Consumables

KP61B-CE 1 box containing 4 x 21 m rolls of thermal paper, 110 mm wide
KP65HM-CE 1 box containing 4 x 21 m rolls of thermal paper, 110 mm wide, high contrast
KP91HG-CE 1 box containing 4 x 18 m rolls of thermal paper, 110 mm wide, high glossy

Power switch ADJUST control COPY button VIDEO IN connector (BNC)
SIZE switch BRT button PRINT button VIDEO OUT connector (BNC)
MODE switch CONT button Printout/Cutter Remote control terminal
LED indicator FUNC button Open lever Power terminal (AC LINE)
(BRT/CONT/EXP) indicator FEED button DIP switches Potential equalization terminal

2

3 4 51 6 7 8 9 10 11 12

14

13

15 16 17 18

19

20

2

3

4

5

1

6

7

8

9

10

11

12

14

13

15

16

17

18

19

20