Mitsubishi Electronics MGS2500HV User Manual
MITSUBISHI MGS SERIES
Overall dimensions
L : Length
mm
6000
H : Height
mm
3460
Total Weight (Wet)
kg
15500
MMGGSS22550000HHVV
60Hz/3.3kV
STAND-BY
2000 kW
DIESEL GENERATOR SET
60Hz/1800 rpm/3.3kV
POWER RATING (0.8 P.F.) MODEL CODE
STAND-BY 2000 kW 63S-T82M
MGS2500HV with typical options
CONDITIONS & DEFINITIONS
Stand-by: Code: S
Applicable for supplying emergency power at varying load in the event of normal utility power interruption.
Fuel stop power in accordance with ISO15550, IS O3046/1, JISB8002-1, DIN6271 and BS5514.
Conditions:
Engine ratings are based on SAE J1349 standard conditions and also apply at ISO3046/1, DIN6271 & BS5514 standard
conditions.
Fuel rates: based on A STM D975, BS2869 and on fuel oil of 3 5° API (16°C or 60° F) gravity hav ing a LH V of 4 2, 78 0 kJ /kg
(18,390 Btu/lb.) when used at 29°C (85° F) and weighing 838.9 g/liter (7.001 lbs./U.S. gal.).
DIMENSION (Reference Data)
W : Width mm 2395
Total Weight (Dry) kg 14800
MITSUBISHI MGS SERIES
Bore
mm
170
Stroke
mm
180
Displacement L 65.4
Piston speed
m/sec.
10.8
Compression ratio 14
Lubricating oil capacity L 230
Coolant capacity without radiator
L
170
Coolant pump external resistance
m water
5.0
Coolant pump flow rate
L/min
1850
Cooling fan airflow rate
m3/min
2500
Cooling fan air flow restriction
kPa
0.1
Ambient air temperature
°C
40
Allowable exhaust back pressure
kPa
6.0
Exhaust flange size (internal diameter)
mm
350
Gross Engine Power*
kWm
2105
Brake mean effective pressure
MPa
2.2
Regenerative absorption
kW
192
Noise Level at 1 m
dB(A)
114
(excluding: intake, exhaust & fan)
Fuel consumption load 100%*
L/hr.
531
Fuel consumption load 75%*
L/hr.
397
Combustion air inlet flow rate
m3/min
182
Exhaust gas flow rate
m3/min
480
Exhaust gas temperature
°C
530
Heat rejection to coolant
kW
688
Heat rejection to exhaust
kW
1690
Heat rejection to atmosphere from engine
kW
159
Heat rejection to atmosphere from generator
kW
75
STAND-BY
2000 kW
MGS SERIES DIESEL ENGINE: MITSUBISHI S16R-PTAA2
DIESEL GENERATOR SET
MGS2500HV
V-16, 4 stroke-cycle water-cooled, turbocharged and air-to-air cooling system
ENGINE SPECIFICATIONS & TECHNICAL DATA
ENGINE OPERATING DATA
* WITH FAN basis.
Deration for engine
Note: Please consult with your nearest Mitsubishi MGS dealer
ENGINE STANDARD EQUIPMENT
Aftercooler
Turbocharger filter
Structure ste el bas e
Crankcase breather
Charging alternator
Lubricating oil cooler
Fuel filters, full flow paper element
Fuel transfer pump, gear driven, plunger type
Electronic type governor
Jacket water heater
Jacket water pump, gear driven
Lubricating oil filter, full flow paper element
Lubricating oil pump, gear driven
Exhaust dry manifold
Radiator, blower fan, fan drive
Manual shutoff
24V DC electric starting motor
Loading...