Mitsubishi FX3S-5DM User Manual

This manual confers no industrial property rights or any rights of any other kind,
nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
held responsible for any problems involving industrial property rights which may
occur as a result of using the contents noted in this manual.

Warranty

Exclusion of loss in opportunity and secondary loss from warranty liability
Regardless of the grat is warranty term, Mitsubishi shall not be liable for compensation to:
(1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
(2)

Loss in opport unity, lost profits inc urred to the user by Failures of Mitsubishi p roducts.

(3)

Special damages and secondary damages w hether foreseeable or not, compensa tion for
accidents, and compensation for damages to products other than Mitsubishi products.

(4) Replacement by the user, maintenance of on-site equipment, start-up test run

and other tasks.

For safe use

This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in
a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric
power, aerospace, medicine or passenger movement vehicles, consult with
Mitsubishi Electric.
This product has been manufactured under strict quality control. However
when installing the product where major accidents or losses could occur if the
product fails, install appropriate backup or failsafe functions in the system.

•

•

•

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN

JY997D51601D

Side

JAPANESE

A

Side

ENGLISH

B

FX3S-5DM

INSTALLATION MANUAL

Manual Number JY997D51601

Revision D

Date March 2019

This manual describes the part names, dimensions, mounting, and specifications
of the product. Before use, read this manual and the manuals of all relevant
products fully to acquire proficiency in handling and operating the product. Make
sure to learn all the product information, safety information, and precautions.
Store this manual in a safe place so that it can be taken out and read whenever
necessary. Always forward it to the end user.
Registration:
The company names, system names and product names mentioned in this
manual are either registered trademarks or trademarks of their respective
companies.

In some cases, trademark symbols such as '™' or '
manual.

Effective March 2019
Specifications are subject to change without notice.

Safety Precaution

This manual classifies the safety precautions into two categories:

and .

Depending on the circumstances, procedures indicated by may
also cause severe injury.
It is important to follow all precautions for personal safety.

2014 MITSUBISHI ELECTRIC CORPORATION

(Read these precautions before use.)

Indicates that incorrect handling may cause hazardous
conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous
conditions, resulting in medium or slight personal injury
or physical damage.

Associated Manuals

Manual name Manual No. Description

3S Series

FX
User’s Manual

- Hardware Edition

How to obtain manuals

For product manuals or documents, consult with the Mitsubishi Electric dealer
from who you purchased your product.

Applicable standards

FX3S-5DM comply with the EC Directive (EMC Directive). Further information can
be found in the following manual.

Attention

This product is designed for use in industrial applications.

1. Outline

The FX3S-5DM display module (hereinafter called display module) is installed to
the FX

3S Series main unit or expansion board to monitor/change device states

and values.

1.1 Incorporated Items

Product FX3S-5DM display module

Included items Installation Manual (This manual)

JY997D48601

MODEL CODE:

09R535

3S Series User's Manual - Hardware Edition

FX

®

' are not specified in this

Explains the FX3S Series PLC
specifications for I/O, wiring,
installation, and maintenance.

Side

B

1.2 External Dimensions and Part Names

[4]

[3]

[2]

[1]

No. Name Description

[1] "OK" button Use to choose the item, set the value, etc.

[2] "+" button Use to move cursor or set the value.

[3] "-" button Use to move cursor or set the value.

[4] "ESC" button Use to cancel operation or return to previous screen.

[5] Display Displays current time and monitored status of device.

[6]

[7]

2. Installation

INSTALLATION
PRECAUTIONS

 Make sure to cut off all phases of the power supply externally before attempting

installation or wiring work.
Failure to do so may cause electric shock or damage to the product.

INSTALLATION
PRECAUTIONS

 Use the product within the generic environment specifications described in PLC

main unit manual (Hardware Edition).
Never use the product in areas with excessive dust, oily smoke, conductive dusts,
corrosive gas (salt air, Cl
impacts, or expose it high to temperature, condensation, or rain and wind.
If the product is used in such conditions, electric shock, fire, malfunctions,
deterioration or damage may occur.

 Do not touch the conductive parts of the product directly.

Doing so may cause device failures or malfunctions.

 Connect the display module securely to the appropriate connector.

Loose connections may cause malfunctions.

The following section describes the installation method for the FX3S Series PLC
(FX

3S-30M. In this example).

Turn off the power to the PLC before installation.
For more details on removal and installation, refer to the PLC main unit manual.

2.1 When Installing the Display Module Directly to the Main Unit

1) Remove the top cover (A in the figure
on the right).

2) Make sure the display module (B in the
figure on the right) is in parallel with the
main unit and attach it to the optional
equipment connector.

[5]

35 (1.38")

Connector for
PLC

Display module
fixing hook

34.4 (1.36")

51.2 (2.02")

9.6 (0.38")

12 (0.48")

MASS (Weight): Approx. 20 g (0.05 lbs)

Used to connect display module to PLC.

Used to fix display module to PLC.
(When used together with an expansion board)

2, H2S, SO2 , or NO2), flammable gas, vibration or

3S Series User's Manual - Hardware Edition

FX

Unit: mm (inches)

[6]

[7]

Cut off this part when
using an expansion board
at the same time.

A

1)

B

2)

2.2 When Using the Display Module Together with an Expansion Board

Assuming that the expansion board is attached to the main unit.
The connector cover for the expansion board is removed.
To attachment of the expansion board, refer to the following manual.

1) Cut off part A shown in the right figure
(display module).

Caution:

When part A is cut off, the display
module can not be installed to the main
unit directly.

2) Make sure the display module is in
parallel with the main unit and attach it
to the optional equipment connector (B
in the figure on the right).

3S Series User's Manual - Hardware Edition

FX

2)

B

A

3. Specifications

STARTUP AND
MAINTENANCE
PRECAUTIONS

 Do not disassemble or modify the PLC.

Doing so may cause fire, equipment failures, or malfunctions.
* For repair, contact your local Mitsubishi Electric representative.

 Do not drop the product or exert strong impact to it.

Doing so may cause damage.

DISPOSAL
PRECAUTIONS

 Please contact a certified electronic waste disposal company for the

environmentally safe recycling and disposal of your device.

TRANSPORTATOION AND
STORAGE PRECAUTIONS

 The product is a precision instrument. During transportation, avoid impacts larger

than those specified in the general specifications by using dedi cated packaging
boxes and shock-absorbing palettes.
Failure to do so may cause failures in the product.
After transportation, verify operation of the product and check for damage of the
mounting part, etc.

3.1 Applicable PLC

Model name Applicability

FX

3S Series PLC Ver. 1.20 or later

 Only one display module can be used per main unit.

For details on the system configuration, refer to the following manual.

3.2 General Specifications

The general specifications are equivalent to the PLC main unit.
For general specifications, refer to the following manuals.

3.3 Display Specifications

Item Specifications

Display device TN monochrome liquid crystal display

Display character Seven-segment displ ay + icon display

Backlight Green LED backlight

Button 4 operation buttons (ESC, -, +, and OK)

4. Function List

The functions of a display module are listed as follows:
For details on the functions, refer to the following manuals.

 Monitor/Test
 Clock display and setting
 Operation button ON/OFF information
 Display screen protect function
 Specified device monitor function
 Back light off function
 Error display valid/invalid
 Decimal/hexadecimal current value display setting

3S Series User's Manual - Hardware Edition

FX

3S Series User's Manual - Hardware Edition

FX

3S Series User's Manual - Hardware Edition

FX

「电器电子产品有害物质限制使用标识要求」的表示方式

Note: This symbol mark is for China only.

含有有害6物质的名称，含有量，含有部品
　本产品中所含有的有害6物质的名称，含有量，含有部品如下表
　所示。

产品中有害物质的名称及含量

有害物质

部件名称

外壳 ○ ○ ○ ○ ○ ○

可编程
控制器

印刷基板 × ○ ○ ○ ○ ○

铅

(Pb)汞(Hg)镉(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴
二苯醚
(PBDE)

本表格依据SJ/T 11364的规定编制。

○:表示该有害物质在该部件所有均质材料中的含量均在GB/T

26572规定的限量要求以下。

×:

表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T
26572规定的限量要求。

基于中国标准法的参考规格:GB/T15969.2