Mitsubishi Eclipse 1997 FWD 2.0L DOHC Workshop Manual

Page 1
mitsubishi :: Mitsubishi Eclipse FWD L4-1997cc
2.0L DOHC MFI (1997)
Page 2
> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn Relay > Component Information > Locations
Alarm Horn Relay: Locations
Page 3
> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn Relay > Component Information > Locations > Page 7
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Relay Location Views J-S
Page 4
Theft-alarm Horn Relay L
Page 5
Page 6
> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn Relay > Component Information > Locations > Page 8
Alarm Horn Relay: Testing and Inspection
Horn Relay Continuity Check
Horn Relay And Theft-alarm Horn Relay Continuity Check - Chart
Page 7
Page 8
> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Antitheft Relay > Component Information > Locations > Automatic Transmission
Antitheft Relay: LocationsAutomatic Transmission
Page 9
> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Antitheft Relay > Component Information > Locations > Automatic Transmission >
Page 13
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 10
Page 11
Relay Location Views J-S
Theft-alarm Starter Relay L
Page 12
> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Antitheft Relay > Component Information > Locations > Automatic Transmission > Page 14
Antitheft Relay: LocationsManual Transmission
Page 13
> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Antitheft Relay > Component Information > Locations > Automatic Transmission >
Page 15
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 14
Page 15
Relay Location Views J-S
Theft-alarm Starter Relay L
Page 16
> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Keyless Entry Module > Component Information > Locations
Keyless Entry Module: Locations
Solenoid And Solenoid Valve Overview
Solenoid And Solenoid Valve Views K-N
Name Symbol
Receiver L
Page 17
Page 18
> Relays and Modules > Relays and Modules - Body and Frame > Convertible Top Control Module > Component Information > Locations
Convertible Top Control Module: Locations
Interior - Connector E (33 Thru 58)
Convertible top control modules
Page 19
(E-52)(E-53)(E-54)
Page 20
> Relays and Modules > Relays and Modules - Body and Frame > Keyless Entry Module > Component Information > Locations
Keyless Entry Module: Locations
Solenoid And Solenoid Valve Overview
Solenoid And Solenoid Valve Views K-N
Name Symbol
Receiver L
Page 21
Page 22
> Relays and Modules > Relays and Modules - Body and Frame > Power Door Lock Relay > Component Information > Locations > Door Lock Power Relay 1
Power Door Lock Relay: LocationsDoor Lock Power Relay 1
Page 23
> Relays and Modules > Relays and Modules - Body and Frame > Power Door Lock Relay > Component Information > Locations > Door Lock Power Relay 1 > Page 30
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 24
Page 25
Relay Location Views J-S
Door Lock Power Relay 1 N
Page 26
> Relays and Modules > Relays and Modules - Body and Frame > Power Door Lock Relay > Component Information > Locations > Door Lock Power Relay 1 > Page 31
Power Door Lock Relay: LocationsDoor Lock Power Relay 2
Page 27
> Relays and Modules > Relays and Modules - Body and Frame > Power Door Lock Relay > Component Information > Locations > Door Lock Power Relay 1 > Page 32
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 28
Page 29
Relay Location Views J-S
Door Lock Power Relay 2 S (for keyless entry system)
Page 30
> Relays and Modules > Relays and Modules - Body and Frame > Sunroof / Moonroof Module > Component Information > Locations
Sunroof / Moonroof Module: Locations
Solenoid And Solenoid Valve Overview
Solenoid And Solenoid Valve Views K-N
CONTROL UNIT VIEW
Sunroof-ECU K
Page 31
Page 32
> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Locations
ABS Main Relay: Locations
Location of Brake System Components
Page 33
> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Locations > Page 40
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 34
Page 35
Relay Location Views J-S
ABS Power Relay P
Page 36
> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Diagrams > Motor Relay
ABS Motor Relay Terminals
Page 37
Page 38
> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Diagrams > Motor Relay > Page 43
ABS Valve Relay Terminals
Page 39
Page 40
> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Diagrams > Page 44
ABS Main Relay: Testing and Inspection
1. Remove the splash shield.2. Remove the relay box mounting bolts.3. Insert the tip of a screwdriver into the space between the hydraulic unit and the relay box cover and use it to open the tab at one place, and then remove the cover.
4. Take out all of the relays from the relay box and check the continuity between the terminals when power is not supplied and when power is supplied.
- Results should be as shown in the illustrations.
MOTOR RELAY
ABS Motor Relay Terminals
VALVE RELAY
ABS Valve Relay Terminals
Page 41
Page 42
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications
Terminal Voltage Check Chart
Page 43
Page 44
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications > Page 48
Electronic Brake Control Module: Locations
Solenoid And Solenoid Valve Overview
Page 45
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications > Page 49
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 46
Page 47
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications > Page 50
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Solenoid And Solenoid Valve Views A-J
Page 48
ABS-ECU Removal
ABS-ECU H
Page 49
Page 50
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications > Page 51
ABS-ECU Connector Terminal Arrangement
Page 51
Page 52
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection > Terminal Resistance & Continuity Check
Electronic Brake Control Module: Testing and InspectionTerminal Resistance & Continuity Check
Terminal Resistance And Continuity Check Chart
CAUTION:
If resistance or continuity checks are performed on the wrong terminals, damage to the vehicle wiring, sensors, ABS-ECU, and/orohmmeter may occur. Use care to prevent this.
NOTE:
- When measuring resistance and checking continuity, a harness for checking contact pin pressure should be used instead of inserting a test probe.- Checks do not have to be carried out in the order given in this chart.
1. Turn the ignition switch to "OFF."2. Disconnect the ABS-ECU connector.3. Measure the resistance and check for continuity between the terminals of the ABS-ECU harness-side connector while referring to the check chart.4. If the ohmmeter shows any deviation from the normal condition, check the corresponding sensor, actuator and related electrical wiring, and then
repair or replace.
5. After repair or replacement, recheck with the ohmmeter to confirm that the repair or replacement has corrected the problem.
Page 53
Page 54
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection > Terminal Resistance & Continuity Check > Page 54
Electronic Brake Control Module: Testing and InspectionTerminal Voltage Check
Check Connector
Page 55
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection >
Terminal Resistance & Continuity Check > Page 55
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 56
Terminal Voltage Check Chart
NOTE:
Page 57
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection >
Terminal Resistance & Continuity Check > Page 56
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
- Measure voltage with the ABS-ECU connectors connected.
- You may find it convenient to pull out the ABS-ECU to make it easier to reach the connector terminals.
- Checks don't have to be carried out in the order given in the chart.
1. Connect a needle-nosed wire probe (paper clip etc.) to a voltmeter probe.2. Insert the needle-nosed wire probe into each of the ABS-ECU connector terminals from the wire side, and measure the voltage while referring to
the check chart.
Caution:
Short-circuiting the positive (+) probe between a connector terminal and ground could damage the vehicle wiring, the sensor,ABS-ECU, or all three. Use care to prevent this.
3. If voltmeter shows any division from standard value, check the corresponding sensor, actuator and related electrical wiring, then repair or replace.
Page 58
4. After repair or replacement, recheck with the voltmeter to confirm that the repair has corrected the problem.
Page 59
Page 60
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection > Terminal Resistance & Continuity Check > Page 57
Electronic Brake Control Module: Testing and InspectionConnector Terminal Arrangement
ABS-ECU Connector Terminal Arrangement
CAUTION;
1. Use the special tool (MB991356) to check the ABS-ECU terminal voltage and resistance.2. The ABS-ECU connector terminal arrangement for troubleshooting is different from the terminal arrangement shown on the special tool connector. So take the readings from the terminal numbers of the special tool when checking.
Example
ABS-ECU connector terminal number for troubleshooting: No. 18.Terminal number shown on the special tool connector: No. 1.
Page 61
Page 62
> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection > Page 58
Electronic Brake Control Module: Service and Repair
ABS-ECU Removal
1. Remove the RH cowl side trim.2. Remove the front scuff plate.3. Remove the control unit cover and the ABS-ECU.4. Reverse procedure to install.
Page 63
Page 64
> Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations
Radiator Cooling Fan Motor Relay: Locations
Relay Locations Overview A, B, C & G
Page 65
> Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 63
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 66
Page 67
Relay Location Views C-I
Radiator Fan Relay (HI),(LO1) C
Page 68
> Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 64
Radiator Cooling Fan Motor Relay: Testing and Inspection
1. With battery (positive) power supplied to the No. 1 terminal and the negative cable on terminal No. 3, there should be continuity across terminals
4 and 5.
2. When power is not supplied there should be continuity across terminal Nos. 1 and 3.
Page 69
Page 70
> Relays and Modules > Relays and Modules - Cruise Control > Cruise Control Relay > Component Information > Locations
Cruise Control Relay: Locations
Relay Locations Overview A, B, C & G
Auto-Cruise Control Relay A
Page 71
Page 72
> Relays and Modules > Relays and Modules - Cruise Control > Cruise Control Relay > Component Information > Locations > Page 69
Cruise Control Relay: Testing and Inspection
Page 73
Page 74
> Relays and Modules > Relays and Modules - HVAC > Blower Motor Relay > Component Information > Locations
Blower Motor Relay: Locations
Page 75
> Relays and Modules > Relays and Modules - HVAC > Blower Motor Relay > Component Information > Locations > Page 74
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Relay Location Views J-S
Page 76
Blower Motor Relay K
Page 77
Page 78
> Relays and Modules > Relays and Modules - HVAC > Blower Motor Relay > Component Information > Locations > Page 75
Blower Motor Relay: Testing and Inspection
BLOWER MOTOR RELAY CONTINUITY CHECK
Page 79
Page 80
> Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Locations
Compressor Clutch Relay: Locations
Relay Locations Overview A, B, C & G
Page 81
> Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Locations > Page 79
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 82
Page 83
Relay Location Views C-I
A/C Compressor Clutch Relay C
Page 84
> Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Locations > Page 80
Compressor Clutch Relay: Testing and Inspection
A/C COMPRESSOR CLUTCH RELAY CONTINUITY CHECK
Page 85
Page 86
> Relays and Modules > Relays and Modules - HVAC > Condenser Fan Motor Relay, HVAC > Component Information > Locations
Condenser Fan Motor Relay: Locations
Relay Locations Overview A, B, C & G
Page 87
> Relays and Modules > Relays and Modules - HVAC > Condenser Fan Motor Relay, HVAC > Component Information > Locations > Page 84
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 88
Page 89
Relay Location Views C-I
Condenser Fan Relay (HI),(LO) C
Page 90
> Relays and Modules > Relays and Modules - HVAC > Condenser Fan Motor Relay, HVAC > Component Information > Locations > Page 85
Condenser Fan Motor Relay: Testing and Inspection
CONDENSER FAN RELAY (LO) AND (HI) CONTINUITY CHECK
Page 91
Page 92
> Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Locations
Control Module HVAC: Locations
Solenoid And Solenoid Valve Overview
Page 93
> Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Locations > Page 89
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 94
Page 95
Solenoid And Solenoid Valve Views A-J
CONTROL UNIT VIEW
Automatic Compressor-ECM G
Page 96
> Relays and Modules > Relays and Modules - Lighting and Horns > Fog/Driving Lamp Relay > Component Information > Locations
Fog/Driving Lamp Relay: Locations
Relay Locations Overview A, B, C & G
Page 97
> Relays and Modules > Relays and Modules - Lighting and Horns > Fog/Driving Lamp Relay > Component Information > Locations > Page 94
Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
Page 98
Page 99
Relay Location Views C-I
Fog Light Relay C
Page 100
> Relays and Modules > Relays and Modules - Lighting and Horns > Fog/Driving Lamp Relay > Component Information > Locations > Page 95
Fog/Driving Lamp Relay: Testing and Inspection
Fog Light Relay Continuity Check
Loading...