Mitsubishi Eclipse 1997 User Manual

mitsubishi :: Mitsubishi Eclipse Spyder GS-T FWD
L4-1997cc 2.0L DOHC Turbo MFI (1997)

> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn Relay > Component Information > Locations

Alarm Horn Relay: Locations

> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn Relay > Component Information > Locations > Page 7

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views J-S

RELAY VIEW

Theft-alarm Horn Relay L

> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn Relay > Component Information > Locations > Page 8

Alarm Horn Relay: Testing and Inspection

Horn Relay Continuity Check

Horn Relay And Theft-alarm Horn Relay Continuity Check - Chart

> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Antitheft Relay > Component Information > Locations > Automatic Transmission

Antitheft Relay: LocationsAutomatic Transmission

> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Antitheft Relay > Component Information > Locations > Automatic Transmission >

Page 13

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views J-S

RELAY VIEW

Theft-alarm Starter Relay L

> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Antitheft Relay > Component Information > Locations > Automatic Transmission > Page 14

Antitheft Relay: LocationsManual Transmission

> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Antitheft Relay > Component Information > Locations > Automatic Transmission >

Page 15

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views J-S

RELAY VIEW

Theft-alarm Starter Relay L

> Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Keyless Entry Module > Component Information > Locations

Keyless Entry Module: Locations

Solenoid And Solenoid Valve Overview

Solenoid And Solenoid Valve Views K-N

Name Symbol

Receiver M

> Relays and Modules > Relays and Modules - Body and Frame > Convertible Top Control Module > Component Information > Locations > Component Locations

Convertible Top Control Module: Component Locations

Solenoid And Solenoid Valve Overview

Solenoid And Solenoid Valve Views K-N

Control Unit View

Convertible Top Control Module N

> Relays and Modules > Relays and Modules - Body and Frame > Convertible Top Control Module > Component Information > Locations > Component Locations > Page 24

Convertible Top Control Module: Connector Locations

Interior - Connector E (33 Thru 58)

Convertible top control modules

(E-52)(E-53)(E-54)

> Relays and Modules > Relays and Modules - Body and Frame > Keyless Entry Module > Component Information > Locations

Keyless Entry Module: Locations

Solenoid And Solenoid Valve Overview

Solenoid And Solenoid Valve Views K-N

Name Symbol

Receiver M

> Relays and Modules > Relays and Modules - Body and Frame > Power Door Lock Relay > Component Information > Locations

Power Door Lock Relay: Locations

> Relays and Modules > Relays and Modules - Body and Frame > Power Door Lock Relay > Component Information > Locations > Page 31

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views J-S

RELAY VIEW

Door Lock Power Relay 1 N

> Relays and Modules > Relays and Modules - Body and Frame > Sunroof / Moonroof Module > Component Information > Locations

Sunroof / Moonroof Module: Locations

Solenoid And Solenoid Valve Overview

Solenoid And Solenoid Valve Views K-N

CONTROL UNIT VIEW

Sunroof-ECU K

> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Locations

ABS Main Relay: Locations

Location of Brake System Components

> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Locations > Page 39

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views J-S

RELAY VIEW

ABS Power Relay P

> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Diagrams > Motor Relay

ABS Motor Relay Terminals

> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Diagrams > Motor Relay > Page 42

ABS Valve Relay Terminals

> Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Diagrams > Page 43

ABS Main Relay: Testing and Inspection

1. Remove the splash shield.2. Remove the relay box mounting bolts.3. Insert the tip of a screwdriver into the space between the hydraulic unit and the relay box cover and use it to open the tab at one place, and then
remove the cover.

4. Take out all of the relays from the relay box and check the continuity between the terminals when power is not supplied and when power is supplied.

- Results should be as shown in the illustrations.

MOTOR RELAY

ABS Motor Relay Terminals

VALVE RELAY

ABS Valve Relay Terminals

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications

Terminal Voltage Check Chart

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications > Page 47

Electronic Brake Control Module: Locations

Solenoid And Solenoid Valve Overview

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications > Page 48

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications > Page 49

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Solenoid And Solenoid Valve Views A-J

ABS-ECU Removal

RELAY VIEW

ABS-ECU H

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Specifications > Page 50

ABS-ECU Connector Terminal Arrangement

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection > Terminal Resistance & Continuity Check

Electronic Brake Control Module: Testing and InspectionTerminal Resistance & Continuity Check

Terminal Resistance And Continuity Check Chart

CAUTION:

If resistance or continuity checks are performed on the wrong terminals, damage to the vehicle wiring, sensors, ABS-ECU, and/orohmmeter may occur. Use care to prevent this.

NOTE:

- When measuring resistance and checking continuity, a harness for checking contact pin pressure should be used instead of inserting a test probe.- Checks do not have to be carried out in the order given in this chart.

1. Turn the ignition switch to "OFF."2. Disconnect the ABS-ECU connector.3. Measure the resistance and check for continuity between the terminals of the ABS-ECU harness-side connector while referring to the check chart.4. If the ohmmeter shows any deviation from the normal condition, check the corresponding sensor, actuator and related electrical wiring, and then

repair or replace.

5. After repair or replacement, recheck with the ohmmeter to confirm that the repair or replacement has corrected the problem.

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection > Terminal Resistance & Continuity Check > Page 53

Electronic Brake Control Module: Testing and InspectionTerminal Voltage Check

Check Connector

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection >

Terminal Resistance & Continuity Check > Page 54

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Terminal Voltage Check Chart

NOTE:

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection >

Terminal Resistance & Continuity Check > Page 55

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

- Measure voltage with the ABS-ECU connectors connected.

- You may find it convenient to pull out the ABS-ECU to make it easier to reach the connector terminals.

- Checks don't have to be carried out in the order given in the chart.

1. Connect a needle-nosed wire probe (paper clip etc.) to a voltmeter probe.2. Insert the needle-nosed wire probe into each of the ABS-ECU connector terminals from the wire side, and measure the voltage while referring to

the check chart.

Caution:

Short-circuiting the positive (+) probe between a connector terminal and ground could damage the vehicle wiring, the sensor,ABS-ECU, or all three. Use care to prevent this.

3. If voltmeter shows any division from standard value, check the corresponding sensor, actuator and related electrical wiring, then repair or replace.

4. After repair or replacement, recheck with the voltmeter to confirm that the repair has corrected the problem.

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection > Terminal Resistance & Continuity Check > Page 56

Electronic Brake Control Module: Testing and InspectionConnector Terminal Arrangement

ABS-ECU Connector Terminal Arrangement

CAUTION;

1. Use the special tool (MB991356) to check the ABS-ECU terminal voltage and resistance.2. The ABS-ECU connector terminal arrangement for troubleshooting is different from the terminal arrangement shown on the special tool connector. So
take the readings from the terminal numbers of the special tool when checking.

Example

ABS-ECU connector terminal number for troubleshooting: No. 18.Terminal number shown on the special tool connector: No. 1.

> Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Testing and Inspection > Page 57

Electronic Brake Control Module: Service and Repair

ABS-ECU Removal

1. Remove the RH cowl side trim.2. Remove the front scuff plate.3. Remove the control unit cover and the ABS-ECU.4. Reverse procedure to install.

> Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations

Radiator Cooling Fan Motor Relay: Locations

Fuel Pump, Automatic Shut Down And EATX Relay

Fuel Pump, Automatic Shut Down And EATX Relay

> Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 62

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views C-I

RELAY VIEW

Radiator Fan Relay (HI), (LO1), (LO2) D, E

> Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 63

Radiator Cooling Fan Motor Relay: Testing and Inspection

1. With battery (positive) power supplied to the No. 1 terminal and the negative cable on terminal No. 3, there should be continuity across terminals

4 and 5.

2. When power is not supplied there should be continuity across terminal Nos. 1 and 3.

> Relays and Modules > Relays and Modules - Cruise Control > Cruise Control Module > Component Information > Locations

Cruise Control Module: Locations

Solenoid And Solenoid Valve Overview

> Relays and Modules > Relays and Modules - Cruise Control > Cruise Control Module > Component Information > Locations > Page 68

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Solenoid And Solenoid Valve Views A-J

CONTROL UNIT VIEW

Auto-Cruise ECU J

> Relays and Modules > Relays and Modules - HVAC > Blower Motor Relay > Component Information > Locations

Blower Motor Relay: Locations

> Relays and Modules > Relays and Modules - HVAC > Blower Motor Relay > Component Information > Locations > Page 73

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views J-S

RELAY VIEW

Blower Motor Relay K

> Relays and Modules > Relays and Modules - HVAC > Blower Motor Relay > Component Information > Locations > Page 74

Blower Motor Relay: Testing and Inspection

BLOWER MOTOR RELAY CONTINUITY CHECK

> Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Locations

Compressor Clutch Relay: Locations

Fuel Pump, Automatic Shut Down And EATX Relay

> Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Locations > Page 78

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views C-I

RELAY VIEW

A/C Compressor Clutch Relay D

> Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Locations > Page 79

Compressor Clutch Relay: Testing and Inspection

A/C COMPRESSOR CLUTCH RELAY CONTINUITY CHECK

> Relays and Modules > Relays and Modules - HVAC > Condenser Fan Motor Relay, HVAC > Component Information > Locations

Condenser Fan Motor Relay: Locations

Fuel Pump, Automatic Shut Down And EATX Relay

> Relays and Modules > Relays and Modules - HVAC > Condenser Fan Motor Relay, HVAC > Component Information > Locations > Page 83

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views C-I

RELAY VIEW

Condenser Fan Relay (HI),(LO) D

> Relays and Modules > Relays and Modules - HVAC > Condenser Fan Motor Relay, HVAC > Component Information > Locations > Page 84

Condenser Fan Motor Relay: Testing and Inspection

CONDENSER FAN RELAY (LO) AND (HI) CONTINUITY CHECK

> Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Locations

Control Module HVAC: Locations

Solenoid And Solenoid Valve Overview

> Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Locations > Page 88

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Solenoid And Solenoid Valve Views A-J

CONTROL UNIT VIEW

Automatic Compressor-ECM I

> Relays and Modules > Relays and Modules - Lighting and Horns > Fog/Driving Lamp Relay > Component Information > Locations

Fog/Driving Lamp Relay: Locations

Fuel Pump, Automatic Shut Down And EATX Relay

> Relays and Modules > Relays and Modules - Lighting and Horns > Fog/Driving Lamp Relay > Component Information > Locations > Page 93

Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (

1997)

Relay Location Views C-I

RELAY VIEW

Fog Light Relay D

> Relays and Modules > Relays and Modules - Lighting and Horns > Fog/Driving Lamp Relay > Component Information > Locations > Page 94

Fog/Driving Lamp Relay: Testing and Inspection

Fog Light Relay Continuity Check

Fog Light Relay Continuity Check - Chart

> Relays and Modules > Relays and Modules - Lighting and Horns > Headlamp Relay > Component Information > Locations

Headlamp Relay: Locations

Fuel Pump, Automatic Shut Down And EATX Relay