The information contained in this document is believed to be accurate in
all respects but is not warranted by Mitel Networks Corporation (MITEL®).
The information is subject to change without notice and should not be
construed in any way as a commitment by Mitel or any of its affiliates or
subsidiaries. Mitel and its affiliates and subsidiaries assume no
responsibility for any errors or omissions in this document. Revisions of
this document or new editions of it may be issued to incorporate such
changes.
No part of this document can be reproduced or transmitted in any form or
by any means - electronic or mechanical - for any purpose without written
permission from Mitel Networks Corporation.
Overview 12
Before You Begin 12
Using the Tutorial 12
Accessing Your Mailbox 13
CHAPTER 2
Main Menu Options 16
Listening to Unread Messages 18
Listening to Read Messages 20
Making a Message 22
CHAPTER 3
Message Menu Options 26
Answering a Message 28
Forwarding a Message 29
Forwarding a Message with a Comment 29
Forwarding a Message without a Comment 31
Accessing a Mailbox 11
Main Menu 15
Message Menu 25
6510 UM Telephone User Guide3
Table of Contents
CHAPTER 4 User Options Menu 33
User Options Menu 34
Changing a Greeting 35
Recording Your Name 38
Changing Your Passcode 38
Creating a Distribution List 39
Modifying a Distribution List 40
Fax Delivery Options 41
Additional Mailbox Options 41
46510 UM Telephone User Guide
About This Guide
In This Chapter . . .
Document Overview on page 6
Intended Audience on page 6
Conventions on page 6
Contacting Mitel Networks on page 7
6510 UM Telephone User Guide5
About This Guide
Document Overview
This guide provides detailed instructions on using the Mitel Networks™
6510 Unified Messaging (UM) software on your telephone.
Intended Audience
This guide is intended for anyone using the 6510 Unified Messaging software over
the telephone.
Note: This document covers the default 6510 UM system telephone
user interface options only. Your system may have been
customized for a different configuration. See your System
Administrator for details if your mailbox commands differ from
this document.
Conventions
This guide uses the following conventions to convey specific information:
Note: Contains additional information about the task you are
performing.
Hint: Contains an alternative method of performing the task or
offers a solution if you run into a problem.
66510 UM Telephone User Guide
About This Guide
Contacting Mitel Networks
Contact us by mail at:
Mitel Networks Corporation
350 Legget Drive
Ottawa, ON K2K 2W7
Contact us by phone:
Tel: 613-592-2122
Fax: 613-592-4784
Contact us on the Web:
www.mitel.com
6510 UM Telephone User Guide7
About This Guide
86510 UM Telephone User Guide
Introduction
In This Chapter . . .
Overview on page 10
Summary of Features on page 10
6510 UM Telephone User Guide9
Introduction
Overview
The 6510 Unified Messaging server simplifies the way that you handle your
messages. Think of it as your own personal receptionist. Depending on the
configuration of your system, the 6510 UM can take your calls when you do not
want to be disturbed, record messages from callers when you are unavailable, and
screen your calls.
Summary of Features
With the 6510 Unified Messaging system, you can:
• Screen and forward calls to other extensions
• Send a single message to multiple users
• Create up to 99 personal distribution lists
• Label messages as urgent, certified, or private
• Save, delete, forward, or reply to messages
• Control message playback (pause, rewind, fast-forward, speed up, and slow
down the playback of messages)
• Be notified of messages through a message light, beeper, or another phone in
your office, home, or car.
106510 UM Telephone User Guide
CHAPTER 1Accessing a Mailbox
In This Chapter . .
Overview on page 12
Before You Begin on page 12
Using the Tutorial on page 12
Accessing Your Mailbox on page 13
6510 UM Telephone User Guide11
Accessing a Mailbox
Overview
Many of the 6510 UM features are available by using a telephone keypad. If you are
already familiar with the 6510 UM system, you can barge through the voice
prompts.
Before You Begin
Before you can use the 6510 UM system, you need to obtain the following
information from your System Administrator:
• Internal extension to access the 6510 UM system;
• Telephone number to access 6510 UM from outside of the office;
• Your mailbox number (this is normally the same number as your
extension);
• Your mailbox password (the default password is 1111).
• A list of other 6510 UM system users.
Using the Tutorial
The first time you access your mailbox, the 6510 UM system initializes a personal
tutorial that guides you through the setup of your mailbox.
To begin the tutorial, dial the 6510 UM system extension from your desk phone.
Depending on the system setup, the system will either:
•ask you to enter your password, or
•play the standard greeting (6510 Auto Attendant).
If you are asked to enter your password, then enter <1111>, or the password that
your System Administrator provided.
If you hear the 6510 Auto Attendant, then press the # key to login, enter your
mailbox number and follow the instructions.
126510 UM Telephone User Guide
Accessing a Mailbox
The tutorial is divided into three sections:
• Password: This tutorial section guides you through the password
setup process.
Note: The initial default password is 1111. It must be changed to
ensure privacy.
• Personal Greetings: This tutorial section describes the different
personal greetings and plays a sample of a greeting. You are then
asked to record each personal greeting. You can change your
greetings at any time.
Note: The Personal Greetings also includes the Busy greeting.
• Name Recording: This tutorial section guides you through the
recording of your name. This is the prompt that the 6510 UM system
uses to identify you to outside callers and internal users who send you
messages.
Accessing Your Mailbox
A mailbox is a compartment within the 6510 UM system in which your messages
are stored and from which you can customize how your calls and messages are
handled.
To access your mailbox when the system does not recognise
you as a subscriber:
1. Dial the 6510 UM system.
To access the 6510 UM system as a user, call it just as you would call
anyone else in your company with a telephone extension number. Your
System Administrator will provide you with the extension number for the
system.
Dial this extension number whenever you want to call the 6510 UM
system from inside your company.
You can also call the 6510 UM system from outside your company by
dialing your company’s automated attendant.
2. Press # when the system answers. The system prompts you to enter
your mailbox number.
6510 UM Telephone User Guide13
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.