Miroil HOD0640 Installation Manual

Models HOD0640

Models HOS0640
HOD0800
HOD1050

(Shown below)

Includes Basin Filter Model D900

HOS0800
HOS1050

(Shown below)

Includes Pump Out Filter

Model HOD0640 / Model HOS0640

Do Not Exceed Rated oil Capacity of 70 lbs (10 gallons)

Model HOD0800 / Model HOS0800

Do Not Exceed Rated oil Capacity of 85 lbs (12 gallons)

Model HOD1050 / Model HOS1050

Do Not Exceed Rated oil Capacity of 105 lbs (15 gallons)

Division of Oil Process Systems Inc.

602 North Tacoma Street Allentown, Pennsylvania 18109

PHONE: [phone] FAX: [phone] E-mail: [e-mail] Web: www.miroil.com

Dear Customer:

Congratulations on your selection of our High Performance Power Filter Machine which continues over
30 years of leadership in oil management.

Your Filter Machine is an important tool for fryer oil management. It is designed to achieve maximum
performance for removal of fine crumb and food materials at the lowest cost.

Another important part of oil management is fryliquid™ antioxidant. When you use this product with
your filter machine you will experience enhanced oil performance and enhanced food quality. This
combination delivers benefits not available from other filter machines.

• Provides consistent and enhanced food quality

• Oil savings from 25% to 40%

• Fryers stay free of carbon and gum deposits

• The MirOil filter doe s not leach harmful chemicals like paper filters

• Faster set-up and clean-up will save on labor

• Throw-away paper filters, D. E. powder or expensive cartridges are not needed.

• MirOil "Rinse & Reuse" filter bags clean up in seconds under hot water spray.

Why fryliquid™ antioxidant and your filter machine deliver these benefits.

All oil breakdown substances are liquid. They pass through filters and filter aids and remain in the oil.

As they accumulate, they undermine the nutritional profile and the cooking performance of the oil.
fryliquid™ antioxidant prevents these breakdown liquid substances from forming in the oil.

This is why fryliquid™ antioxidant is able to provide total control of food quality and oil performance.
fryliquid™ antioxidant prevents off flavors and odors. fryliquid™ antioxidant does not react with
the oil or with the food.

To receive the full benefit from your MirOil Filter Machine, just follow these simple rules.

1. Set up a regular schedule to filter once a day.

2. Add fryliquid™ antioxidant to your oil before each meal session.

3. Follow the filtering and freshening procedures outlined in this manual.

For questions about fryliquid™ antioxidant or your Power Filter Machine. . . .

Frying Hot Line 800.523.9844

Additional Tips

Order a spare filter bag so you are prepared if it may be required in the future.

If the oil for discard is held overnight in the kitchen for security reasons or if you need a measure for the

freshening oil . . . . Order a Model 30LG utility pail - for measuring and / or storing up to 5 gallons of oil.

Division of Oil Process Systems Inc.

602 North Tacoma Street Allentown, Pennsylvania 18109

PHONE: [phone] FAX: [phone] E-mail: [e-mail] Web: www.miroil.com

Loss or Damage During Shipment

Inspect all cartons for damage before unpacking. Your MirOil pump was thoroughly inspected before leaving our factory. The

carrier is responsible for safe delivery. All claims for any loss or damage in transit must be made to the carrier. MirOil will assist with
claims IF damage has been promptly reported to the carrier.

1 Year Limited Warranty on your Filter Machine

This product is warranted only against defects in workmanship or materials for 1 year from date of the filter machine is placed
in service or not longer than 15 months from date of purchase. Liability under the basic 1 year limited warranty is limited to
replacing or repairing parts FOB Allentown PA. Parts must be returned to our factory with shipping costs prepaid.

The 1 year warranty does not cover the costs of service labor or shipping to replace parts.

The use of the filter pump for pumping any liquid other than fryer oil will contaminate the pump and piping. This will
contaminate the oil and may void this warranty

6 month Limited Warranty on your Filter Bag

The filter bag has a pro rata warranty for 6 months. This is similar to a warranty for a battery or tire. The filter bag must be
returned to MirOil for repair, FOB Allentown, PA 18109. If the filter bag is not able to be repaired, It will be replaced with a new
filter bag at the prevailing cost. Credit toward the purchase of the new filter bag will be provided for the unused service life of
the old filter bag. This warranty does not cover the costs shipping to replace parts.

Important Limits for Coverage Under All Warranties

No warranty described above covers the replacement of parts that become inoperative because of wear (except filter bags) or
abuse or for parts subjected to abuse/misuse, negligence, accident or if the product has been improperly repaired or altered
by user or a 3rd party. No other warranty, expressed or implied, is authorized to be made by any parties on behalf of MirOil.

The manufacturer and the manufacturer's sales agents and/or agencies accept no liability for the use or misuse of this
machine. Expressly excluded from warranty are implied warranties of merchantability and fitness for purpose. Manufacturer,
agents and sales agencies disclaim all liability for accidents resulting from use or the misuse of this equipment.

Toll Free Call for warranty information 1.800.523.9844

Priming for Hand Operated Pumps

An oil film is needed as a seal between the internal parts to prime the pump. During storage and shipping the oil may degrade and become
ineffective as a seal. If there is no pumping, disconnect the discharge hose assembly at the quick coupler and pour a quarter cup of oil into
the top of the pump through the hose connection. CAUTION: After adding oil, reconnect the hose coupler carefully. Before turning the
pump handle, make sure the nozzle is aimed at the fryer or it is installed into the nozzle holder. Use this procedure when the pump does not
prime because it has not been used for an extended period.

If your oil / fat is solid at room temperature:

If a plug of solid fat or shortening forms in the hose, It will prevent pumping.

Procedure to prevent plug of solid oil, fat or shortening:

The oil film on the inside wall may collect at a loop in the hose and form a plug of solid fat. This will prevent the pump from
priming. After filtering, disconnect the discharge hose and hang it from a hook to drain. Use a small collector pan or place hose
nozzle in holder tube on Mobility Basin to avoid oil dripping on the floor.

Procedure for correcting blockage from plug of solid fat:

Try to pour some water through the discharge hose. If the water will not pass through the hose it is blocked with fat. Melt the fat
plug by placing the hose in a large tub or sink with hot water.

Safety Caution:

Residue of water in the hose can cause a dangerous splatter of hot oil.

After the fat plug is melted, make sure the water is fully drained before the hose is recoupled. Before turning ON the power filter
always make sure the discharge hose nozzle is directed at the fryer. If the pump is still not primed, allow the pump to run for
about 3 to 5 minutes so the pump heat may melt any residue of fat in or near the pump body.

Safety first - Make sure the hose nozzle is in the holder tube on the Pump Module when the pump is running.

Division of Oil Process Systems Inc.

602 North Tacoma Street Allentown, Pennsylvania 18109

PHONE: [phone] FAX: [phone] E-mail: [e-mail] Web: www.miroil.com