Miomare Z29601GB User Manual
MULTI-FUNCTION SHOWER HEAD SET
Assembly and safety advice
6
Z29601GB
GB / IE Assembly and safety advice Page 3
Multi-Function Shower Head Set
Intended use
Suitable for use with all pressure-resistant hot water
systems such as central heating, continuous-flow
water heater, pressure boiler etc. It is not suitable
for low-pressure water heaters such as wood-fired
or coal-fired hot-water heaters, oil-fired or gas-fired
heaters, open electrical storage heaters. If in doubt,
please consult a plumber or specialist. The product
is intended for personal use only and not for medical or commercial use.The manufacturer does not
accept any liability for any damage caused by
improper use.
Description of parts
1
Hand shower
2
Gaskets
3
Shower hose
4
Water-saving insert
5
Upper wall bracket
6
Lower wall bracket
7
Screws (approx. ø 4.8 x 73 mm)
8
Covering caps
9
Shower rod
10
Hand shower holder
11
Dowels (approx. ø 8 mm)
12
Soap dish
13
Covering cap
14
Spray plate
15
Hand shower lever
16
Adjustment Knob
Technical data
Hand shower: approx. 30 x 15 cm (H x ø),
5 adjustable positions
Shower rod: approx. 70 cm, metal
Shower hose: approx. 150 cm, metal,
G1/2" (approx. 21 mm)
standard connection
Safety advice
Avoid the risk of injury!
CAUTION! DANGER OF INJURY! Please
ensure that no parts are damaged and that all
parts are correctly assembled. Incorrect assembly or fitting may lead to injury. Damaged parts
can adversely affect safety and proper function.
CAUTION! RISK OF SCALDING! When
making the hot water setting please ensure that
the temperature of the water is not too high.
The shower rod
attach or support anything, as the fixings and
the rod
9
own weight.
CAUTION! RISK OF SCALDING! Adjusting
the hand shower
ture of the water coming out. Check the water
temperature before stepping into the shower.
Avoid damage to property!
Assembly should only be carried out by an
experienced person!
Before wall mounting, check that the wall can
take the weight of the shower rod set. If in doubt,
ask in a specialist shop.
CAUTION! WATER DAMAGE! Before drill-
ing, ensure that there are no water pipes where
you intend to drill.
Ensure that all gaskets
Please note that gaskets
and therefore will require to be replaced from
time to time.
Examine the wall before installation and
choose suitable installation fixings. We have
supplied fixings suitable for an ordinary solid
masonry wall.
9
should not be used to
are designed to support only their
1
may change the tempera-
2
are correctly seated.
2
are wear parts
3 GB/IE
Loading...