Miomare 104720-14-02-GB User Manual

IAN 104720

THerMOsTaT sHOWer FITTInG

THerMOsTaT sHOWer FITTInG

Assembly, operating and safety instructions

104720_mio_B_Brause-Armatur_Cover_GB.indd 2 05.12.14 12:05

GB Assembly, operating and safety instructions Page 3

104720_mio_B_Brause-Armatur_Cover_GB.indd 3 05.12.14 12:05

Thermostat Shower Fitting

Proper use

This product is suitable for all pressure-tight hot water
systems such as central heating boilers, instantaneous
water heaters, pressurised boilers and the like. It is
not suitable for low-pressure water heaters such as
wood or coal burning bath geysers, oil or gas bath
geysers, open electrically heated water tanks. If in
doubt please seek the advice of a plumber or heating
engineer. Any use other than that described here or
modification to the product is not permitted and may
lead to damage to persons or property. There is
also the risk of injury and loss of life. The product is
intended for personal use only and not for medical or
commercial use. The manufacturer accepts no liability
for loss or damage arising from improper use.

Description of parts

1

2 S-connectors

2

2 Rosettes

3

2 Sealing rings

4

1 Tap body

4a

1 Changeover button

(for 104720-14-01-GB only)

4b

1 Threaded connector (for the shower hose)

(for 104720-14-01-GB only)

4c

2 Nuts

5

1 Mixer nozzle (for 104720-14-01-GB only)

6

1 Water flow switch

7

1 Water temperature switch

Technical data

Connection spacing: 135 / 165 mm
Connections (Shower hose): G½”

(approx. 21 mm)

Water connection nut: G¾”

(approx. 30 mm)

Temperature control: 20 °C to 38 °C

(scalding protection),
38 °C to 50 °C
(+/- 4 °C) variable
water temperature

Safety advice

Keep the product away from children. The prod-

uct is not a toy.

CAUTION - RISK OF ELECTRIC

SHOCK! Leaks or the escape of

water can lead to danger to life from
electric shock. Check all connections for leaks
carefully. In addition, ensure that all cables from
electrical devices are correctly and safely installed.

CAUTION! RISK OF INJURY! Please ensure

that no parts are damaged and that all parts are
correctly assembled. Incorrect assembly could
lead to injury.

Please note that seals are wear parts and there-

fore will require to be replaced from time to time.

Damaged parts could adversely affect safety

and proper function.

CAUTION! RISK OF DAMAGE TO

PROPERTY! Have the installation done by
experienced persons only. Leaks or escape of
water can lead to serious damage to buildings
or household fittings and furniture. Check all
connections for leaks carefully.

Ensure that all seals are correctly seated to

prevent leakage of water.

CAUTION! DANGER OF SCALDING!

When making the hot water setting please ensure
that the temperature of the water is not too high.

Before installation, make yourself familiar with

all the existing services, e.g. water connection
and stopcocks.

Please read carefully through these operating

instructions before installing and using the product.
Keep all the safety advice and instructions in a
safe place for future reference!

This product must be connected to the water

supply in accordance with the Water Supply
(Water Fittings) regulations 1999, and also to
comply with UK Building Regulations. If you

3 GB

104720_mio_B_Brause-Armatur_Content_GB.indd 3 05.12.14 12:04