Mio Triumph SE Instruction Manual

Don't like reading instruction manuals?

Use your smartphone to scan this QR code to watch the setup video,
or visit www.mioglobal.com/guides

FEATURES:

English 1

WAKING UP YOUR MIO AND QUICK START
MIO TRIUMPH SE AT-A-GLANCE
MODES OF OPERATION
TAKING YOUR HEART RATE WITH THE SMART TOUCH TECHNOLOGY
QUICK TIPS
WEARING MIO IN WATER & LOCKING THE HEART RATE SENSOR
SET TIME & DATE
SET MY MIO
SET ALARM
SET RESTING HEART RATE
USING THE EXERCISE TIMER
MEASURING HEART RATE RECOVERY
WEIGHT MANAGEMENT MODES
TO CHANGE MIO’S BATTERY
MY MIO
SPECIFICATIONS
LIMITED ONE YEAR WARRANTY
DISCLAIMER
WARRANTY AND REPAIRS CONTACT

2
3
5
7
10
11
12
13
14
15
15
20
21
25
26
27
28
29
30

English 1

CONTENTS

2 English

A. WAKING UP YOUR MIO AND QUICK START

Your MIO may be in sleep mode (with a blank display) when you first receive it.

- Hold START until you see blinking 12H or 24H to activate your MIO and start
setting it up.

- Setting time & date format:

Press + or – to toggle the format.

- 12H = Hour clock (AM/PM) & MM/DD date format

- 24H = Hour clock & DD/MM date format

Press SET to move to next setting.

- Do the same for TIME, DATE, YOUR NAME, WEIGHT UNIT, WEIGHT, GENDER,
BIRTH YEAR.

- Press SET to finish START UP.

English 3

Heart Rate (HR)

flashing indicates
measurement
in progress

B. MIO TRIUMPH SE AT-A-GLANCE

Performance Bars

indicates your progress
towards your calorie goal,
indicates effort level
when measuring heart rate

BPM

beats per minute

Alarm

%

percentage of
max heart rate

KCAL

indicates
number is
in calories

SET

indicates
you are in
set mode

4 English

LIGHT/RESET
BUTTON

turns on
backlight,
resets value

START/ STOP/+
BUTTON

starts or stops
the exercise timer,
increases value

SET BUTTON

hold to enter SET
mode, toggle alarm
ON/OFF

MODE/– BUTTON

switches modes,
decreases value

Smart Touch
MIO Sensor

To use light: Press the LIGHT button to turn on the backlight.
Light will stay on for 5 seconds, or until no key has been
pressed for 5 seconds.

English 5

C. MODES OF OPERATION

Press MODE to move to the next mode.

TIME & DATE

- Display time, date, weekday and your
name or initials

NET CALORIES IN

- Display Net Calorie intake

- Enter Calorie intake

EXERCISE TIMER

- Exercise Timer for workouts and other
activities, timer modes including Walk
Run timer

ALARM

- Set Daily Alarm.

6 English

HEART RATE RECOVERY

- Measure your Heart Rate (HR)
Recovery- a good indicator of
fitness level

RESTING HEART RATE

- Measure and display your
Resting Heart Rate (HR)

MY MIO

- Set your personal data and
weight management goal

English 7

D. TAKING YOUR HEART RATE WITH THE
SMART TOUCH TECHNOLOGY SENSOR

Place a finger on the
Smart Touch sensor.
Place another finger on the
opposite side for support
(optional).

Hold to activate Smart
Touch sensor. Make sure
the back plate is in contact
with your wrist. Heart icon
will flash.

8 English

Wait for Heart Rate (HR) readout
(3 to 8 seconds). MIO will beep
when the reading is ready.

Your heart rate (HR) will remain
displayed for 5 seconds after
you release the sensor button.

You can take your HEART RATE (HR) from any mode (except SET modes).

- A one-time read out of your Heart Rate (HR) in beats per minute (BPM) will
display. The small digits at the right display the percentage of your current
heart rate (HR) to your maximum heart rate (HR) (up to 99%).

- MIO calculates this percentage using your personal data. A maximum
heart rate (HR) is an estimate with a variability of up to 15 BPM.

- For continuous reading, keep pressing the sensor.

- For best accuracy, left and right hands should not be in contact during the test.

The display returns to the previous mode seconds after you remove your
finger from the Smart Touch sensor.