User Manual
Pilot Series
Table of contents
Important safety information ................................................................... 4
Precautions .....................................................................................4
Declaration of conformity ................................................................6
Getting to know your Mio ........................................................................7
Mounting and charging your Mio in a vehicle ......................................... 8
Turning your Mio ON and OFF ............................................................. 10
Resetting the device ......................................................................10
Navigating on the screen ...................................................................... 11
Inserting a memory card .......................................................................12
How do I connect the device to my computer? ....................................13
Navigating through the screens ............................................................14
Navigation ............................................................................................15
Main Menu ....................................................................................15
Using the keyboard screen ...........................................................15
How do I go from A-B? ..................................................................16
How do I use the FIND wizard? .............................................16
How do I plan my rst trip? ....................................................17
How do I preview the destination on map? ............................ 18
How do I view my route? ............................................................... 19
How do I select the route type? .............................................19
The driving map .....................................................................19
How do I view my route statistics? ......................................... 20
How do I adjust the volume? ..................................................21
How do I zoom in/out the map? .............................................22
Advanced routing functions ....................................................22
My Places ......................................................................................23
How do I save a location as My Place or Home? ..................23
How do I navigate to a location I have saved? ......................23
How do I navigate to Home? ..................................................24
How do I navigate to a recent place? .....................................24
How do I edit a saved location in My Places? ........................24
How do I search for a POI? ........................................................... 25
1
How do I nd the nearest POIs using Near Me? ....................25
How do I nd the POIs using EXPLORE? ............................. 26
How do I nd a POI using the POI Cluster? ........................... 27
How do I set my POI preferences? ........................................ 27
How do I search for a POI by type? ....................................... 28
How do I search for a POI by keyword? ................................29
Customising the system settings .......................................................... 31
What is MioMore Desktop? ..................................................................37
How do I install MioMore Desktop onto my computer? ................. 37
Loading the data ISO le as a DVD .............................................. 38
My Subscriptions ........................................................................... 38
How do I purchase a subscription? ........................................ 38
How do I activate my subscription? .......................................39
How do I update subscriptions on my Mio? ...........................39
How do I recover my subscription? ........................................ 39
My Maps ........................................................................................39
How do I download a map update? .......................................40
How do I install maps onto my Mio? ......................................41
How do I remove maps from my Mio? ...................................42
Custom POIs ................................................................................. 42
How do I install custom Points of Interest? ............................ 43
How do I delete a Custom POI le/category from my Mio? ...44
Image Search ................................................................................ 44
How do I search for
How do I import
NavPix™
NavPix™
on the Internet? .................... 44
to My Places? .............................45
Unlock Features ............................................................................ 45
Redeem .........................................................................................46
My Places ......................................................................................46
How do I sort My Place locations? ......................................... 47
How do I import or export a location? ....................................47
How do I edit a location from the map screen? ......................47
My Mio ...........................................................................................48
How do I change the displayed language for MioMore
Desktop? ................................................................................ 48
How do I install or remove a voice le for my Mio? ................ 48
2
How do I backup and restore my Mio? ..................................49
How do I recover maps and voice les for my Mio? .............. 49
How do I manually update my Mio? ....................................... 49
How do I recover keys on my Mio? ........................................ 50
How do I congure MioMore Desktop? .................................. 50
Reference ............................................................................................. 52
3
Important safety information
● Removing original equipment, adding accessories or modifying your
vehicle could affect the vehicle’s safety or make it illegal to operate in some
jurisdictions.
● Follow all product instructions and all instructions in your vehicle owner’s
manual regarding accessories or modications.
● Consult your country’s and/or state’s laws regarding operation of a vehicle with
any accessories or modications.
● It is your sole responsibility to place, secure and use your Mio in a manner that
will not cause accidents, personal injury or property damage. Always observe
safe driving practices.
● Do not mount your Mio in a way that may interfere with the safe operation of
the vehicle, the deployment of air bags or other safety equipment.
● Do not operate your Mio while driving.
● Before you use your Mio for the rst time, familiarize yourself with your device
and its operation.
● On main roads, the distance to an exit calculated by your Mio may be further
than the distance shown on road signs. Road signs show the distance to the
start of an exit while your Mio shows the distance to the next intersection,
i.e., the end of the exit ramp or road. To prepare to exit a road, always follow
distance information on road signs.
● The use of information regarding safety or speed camera locations may be
subject to local laws in the country of use. You are responsible for checking
that you can legally use the information in your country or in the country where
the information will be used.
● Do not handle your Mio while it is hot. Let the product cool, out of direct
sunlight.
● At full power, prolonged listening to your Mio via headphones or earphones
can damage the ear of the user.
● Do not expose your Mio to direct sunlight in an unattended vehicle for
prolonged periods. Overheating may damage the unit.
● To discourage theft, do not leave your Mio, mounting bracket or any cables in
plain view in an unattended vehicle.
Precautions
Failure to adhere to these warnings and cautions may lead to death, serious injury
or property damage. Mio disclaims all liability for installation or use of your Mio
4
that causes or contributes to death, injury or property damage or that violates any
law.
About charging
● Use only the charger supplied with your device. Use of another type of charger
will result in malfunction and/or danger.
● This product is intended to be supplied by a LISTED Power Unit marked with
“LPS”, “Limited Power Source” and output rated + 5 V dc / 2.0 A”.
● Use a specied battery in the equipment.
About the charger
● Do not use the charger in a high moisture environment. Never touch the
charger when your hands or feet are wet.
● Allow adequate ventilation around the charger when using it to operate the
device or charge the battery. Do not cover the charger with paper or other
objects that will reduce cooling. Do not use the charger while it is inside a
carrying case.
● Connect the charger to a proper power source. The voltage requirements are
found on the product case and/or packaging.
● Do not use the charger if the cord becomes damaged.
● Do not attempt to service the unit. There are no serviceable parts inside.
Replace the unit if it is damaged or exposed to excess moisture.
About the battery
● Use a specied battery in the equipment.
●CAUTION:
The battery can burst or explode, releasing hazardous chemicals.
To reduce the risk of re or burns, do not disassemble, crush, puncture, or
dispose of in re or water.
● Important instructions (for service personnel only)
●Caution:
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
● Replace only with the same or equivalent type recommended by the
manufacturer.
● The battery must be recycled or disposed of properly.
● Use the battery only in the specied equipment.
● Only use the correct home charger (may be sold separately) or in-car charger
supplied by Mio to charge your Mio internal battery.
● Only use your Mio internal battery with your Mio unit.
● The Mio battery will stop charging when the ambient temperature is less than
0°C (32°F) or more than 40°C (104°F).
5
Declaration of conformity
Note: For regulatory identication purposes, this Mio Pilot series is assigned a model number of N603.
CE
Products with the CE marking comply with the Radio Equipment Directive (RED)
(2014/53/EU), the Electromagnetic Compatibility Directive (2014/30/EU) and the
Low Voltage Directive (2014/35/EU) - issued by the Commission of the European
Community. Compliance with these directives implies conformity to the following
European Standards:
● EN 301 489-1
● EN 301 489-19
● EN 303 413
● EN 55024:2010 + A1:2015
● EN 55032:2015
● EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
The manufacturer cannot be held responsible for modications made by the User
and the consequences thereof, which may alter the conformity of the product with
the CE Marking.
Hereby, MiTAC declares that this Mio Pilot series is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
WEEE
This product must not be disposed of as normal household waste, in accordance
with the EU directive for waste electrical and electronic equipment (WEEE 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale,
or to a municipal recycling collection point.
6
Getting to know your Mio
❶
❷
❸
❹
❺
❻
❶
Power button
❷
Power indicator
❸
Earphone jack
❹
Slot for MicroSD memory card
❺
Touch screen
❻
Connector for in-car charger, USB cable* and
home charger*
*may be sold separately
❼
Speaker
❽
Reset button
❼
❽
7
Mounting and charging your Mio in a vehicle
● Never mount your device where the driver’s eld of vision is blocked.
● If the windscreen is tinted with a reective coating, it may be athermic and
impact the GPS reception. In this instance, please mount your device where
there is a “clear area” - usually just beneath the rear-view mirror.
1 2
3 4
5 6
7
8
CAUTION: For optimal performance of the lithium battery:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight).
• There is no need to fully discharge the battery before charging. You can charge the battery before it is
discharged.
• When storing the product for a long period of time, be sure to fully charge the battery at least once every
two weeks. Over discharge of the battery can affect the charging performance.
• Failure to follow the battery usage instructions could cause damage to your device, battery and even
bodily injury or property damage and will void any warranty.
9
Turning your Mio ON and OFF
Note: The battery may not be fully charged when you use your device for the rst time.
When charging the battery for the very rst time, you should charge it for at least
6 hours with your device turned OFF.
● For the initial start-up, press and hold the power button for 2 seconds to turn
on your device.
2 SEC
When you turn on your device for the rst time, follow the prompts to customise
your device.
Note: The rst time you use your Mio, it may take several minutes to establish a GPS connection. When
you have a GPS x, you can start to use your Mio to plan your trip.
Note: Depending on your Mio model, you may need to enter a Startup Key (which is printed on the side of
the box) and then tap OK to unlock the device. You will only have to do this the rst time you use your Mio.
It is recommended that you keep a copy of the Startup Key in a safe place.
● For normal operation, turn off the device by briey pressing the power button.
Your Mio will enter a suspended state. When you next briey press the power
button, your Mio will return to the Main Menu.
● To turn off your Mio, press and hold the power button for 5 seconds.
5 SEC
Resetting the device
Occasionally, you may need to perform a hardware reset when your Mio stops
responding; or appears to be “frozen” or “locked-up.” Insert a small rod, such as a
straightened paperclip, into the reset button of your device.
10
Navigating on the screen
To operate your Mio, touch the screen with your ngertip. You can perform the
following actions:
● Ta p
Touch the screen once with your ngertip to open items or select onscreen
buttons or options.
● Drag
Hold your ngertip on the screen and drag up/down/left/right or across the
screen. (This is not supported by all applications.)
11
Inserting a memory card
Hold the card (MicroSD) by the edges and gently insert it into the slot as shown in
the illustration.
To remove a card, gently push the top edge of the card inwards to release it, and
pull it out of the slot.
Note: Do not apply pressure to the centre of the memory card.
Note: MiTAC does not guarantee the product’s compatibilities with the storage cards from all manufacturers.
12
How do I connect the device to my computer?
1. Turn on your computer.
2. Plug the large end of the USB cable (may be sold separately) directly into a
USB port on your computer (not a USB hub) and plug the small end into
the device.
CAUTION: When your Mio is turned on and connected to a computer, it is recognized as an external massstorage device. Do NOT delete any les that are pre-installed on your Mio. Deleting the les can cause
your Mio to crash.
on
13
Navigating through the screens
● You can return to the Main Menu screen at any time by:
● Tapping the MAIN MENU button (
which allow you to navigate through the menu screens easily.
● In some menu screens (such as the Keyboard screen), the MAIN MENU
button (
the BACK button (
● If the Back button
returns to the previous screen.
● In some menu screens (such as the map Overview screen), the system
provides the tab buttons in the title bar that allow you to enter the additional
page in the menu screen. Simply tap the desired tab to change the view. The
selected tab will be highlighted as a darker-colour tab.
) will not appear in the title bar. In this instance, you have to tap
) repeatedly.
appears in the top-left corner of a screen, tapping it
) in the title bar of the menu screen,
14
Navigation
Main Menu
The Main Menu is your starting place for various tasks, including searching for a
destination, viewing saved locations as My Place/Home, and searching for POIs
nearby, and so on.
❶ ❷
❸ ❹ ❺
❶
Search for places, areas and streets to help plan
your route.
❷
Display the Map screen.
❸
Access your saved locations.
❹
Congure your Mio to enhance your navigation
experience.
❺
Search for Points of Interest nearby.
Using the keyboard screen
The Keyboard screen will display when you are required to enter text, such as
when searching for a street name. Search results will be listed in matching order,
with the closest matches appearing on the screen. A maximum of 99 results will
display.
The Keyboard screen can display with various layouts depending on the
information you need to enter, including alphabet, number, alternate characters
and combinations of these.
15
● To select a character, tap the character.
● To delete a character, tap
● To enter numbers, tap
● To set the keyboard preference, from the Keyboard screen, tap
. Tap and hold to delete the entire text.
123
.
. Select
the preferred keyboard type from the list.
How do I go from A-B?
CAUTION: For your safety, enter destination information before you start a journey. Do not enter a
destination while driving.
How do I use the FIND wizard?
Your Mio is equipped with maps that provide street-level detail for door-to-door
navigation, including Points of Interest such as accommodation, parking areas,
petrol stations, railway stations and airports. The FIND wizard allows you to
search the location easily.
1. On the Main Menu, tap
.
2. Complete the following:
If you want to… Then…
search for an address,
search all information on the device - city, streets, named
sites, features, landmarks or venues,
search for a city/area,
search a location by postcode,
search for a Point of Interest,
search for a location using a GPS coordinate,
search for a street intersection,
navigate to a recently visited location,
Note: For further instructions on searching for a POI, refer to the “How do I search for a POI?” section.
tap .
tap
tap
tap
tap
tap
tap
tap
.
.
.
.
.
.
.
16
How do I plan my rst trip?
Using your Mio to plan your rst trip is easy. There are several ways to select your
destination. Complete the following to navigate to a street address that you know
using the FIND address wizard.
Note: When it is the rst time you use FIND wizard, the Select Country screen will appear before the FIND
screen. Select your country and then you can start searching location.
If needed, you can change the country to search location. To select the other country, tap the National Flag
button in the title bar of the Keyboard screen before you search the city.
Complete the following:
If you want to… Then…
calculate the route and start navigating,
save the location as a favourite,
save the location as Home,
tap
tap
tap
.
.
. Tap .
17
If you want to… Then…
explore the map,
tap
.
How do I preview the destination on map?
After searching an address (or a POI), you can preview the destination on map to
explore the area near the location. On the Destination screen, tap the
to display the destination preview map as below.
On the destination preview map, you can:
● Tap the
/ button to zoom in/out the map.
● View the information of your destination that is shown at the top of the Map
screen.
● Tap on a street/area/POI to display the related information of the location near
your destination.
● Tap on the map to select the other destination. The information of the selected
street/area/POI near your destination will be displayed. Tapping the check
mark will bring up the Destination screen of the selected location.
button
18
How do I view my route?
How do I select the route type?
Note: This feature is not available on all models.
The Select Route Type screen will be displayed when you tap
Destination screen. All of the four route types (
Shortest
Select your preferred route and tap to start navigating.
For more information about setting the preferred route type, refer to "Route
options" in the “Customising the system settings” section.
) will be calculated.
Fastest, Economical, Easiest
The driving map
from the
and
When you select a route type and tap
directed to your destination by spoken and visual instructions.
The driving map will be displayed automatically when:
● a route is calculated and selected.
● the device is reset and the user is on a route.
, the Map screen will display. You will be
Item Description
Direction and distance of
next turn
Current route Your current route is highlighted.
The direction and distance to your next turn.
Tap
to repeat the vocal instruction.
19
Item Description
Current position
Address bar The current address will be displayed in the text box at
Distance and time
information
Note: Depending on your driving route, you may see some icons that provide different information on your Map
screen. Please note that these icons will not be always displayed during your journeys.
For example: The Speed Limit icon (
the current road. If greyed out, you are below this speed limit. When over set limit, you will be warned with an
audible and visual warning.
Your current position is marked with
the bottom of the Map screen.
Tap to expand and select the following options:
● DTG (Distance to Go)
● TTG (Time to Go)
● km/h or mph (speed) and compass heading
● ETA (Estimated Time of Arrival)
● Time
) on the Map screen. The Speed Limit icon shows the speed limit of
.
How do I change the route conguration?
Tap anywhere on the Map screen to bring up the Map options screen, which
allows you to change the route-related conguration.
For more information about changing the route conguration, refer to the following
sections in this manual.
How do I view my route statistics?
1. From the Map options screen, tap
2. Tap the tabs in the title bar to view the additional information in the different
screens.
20
.
3. Your Mio provides information on your:
● time to destination
● distance to go
● estimated time of arrival
● distance travelled
● time taken for trip
● stationary time
● TTD/DTG/ETA for the journey*
* Depending on the route calculated, you may see more information on the screen such as the estimated time/
distance to the next stop when your trip contains multiple waypoints.
How do I adjust the volume?
1. From the Map options screen, tap .
2. The volume buttons will be displayed on the Map screen in translucent mode.
3. Complete the following:
21
If you want to… Then…
increase/decrease the volume,
mute/unmute,
Note: The volume buttons will automatically disappear after the map is idled for 5 seconds.
tap
/ .
The volume bar indicates the current volume
level.
tap
The speaker icon indicates the status:
.
: muted : unmuted
How do I zoom in/out the map?
1. From the Map options screen, tap
.
2. The zoom buttons will be displayed on the Map screen in translucent mode.
3. Complete the following:
If you want to… Then…
zoom in the map,
zoom out the map,
Note: The zoom buttons will automatically disappear after the map is idled for 5 seconds.
tap and hold .
tap and hold
.
Advanced routing functions
Back-On-Track™ automatic rerouting
You will be redirected if you make a wrong turn. A message informing you that
your route is being re-calculated will display at the top of the screen.
To cancel a route re-calculation, tap
will display asking you to conrm the cancellation. If conrmed, both the re-
calculation and your current route will be cancelled.
from the Map options screen. A warning
22
My Places
My Places has all your saved locations.
How do I save a location as My Place or Home?
1. Search for an address until the Preview screen is displayed.
2. Tap . The location has been added to My Places.
3. To save the location as Home, tap .
Tap
. The location has been set as Home.
How do I navigate to a location I have saved?
1. On the Main Menu, tap
2. Tap the
order of the items:
3. Tap the favourite destination you want to travel to.
Sort by
: by time : by name : by type
button on the top of the scrolling buttons to change the sorting
.
23
4. Tap . Your Mio will calculate the route from your current location.
How do I navigate to Home?
If you have not set an address as Home, the rst time you try to navigate to Home
you will be prompted to search for an address using the address-entry wizard.
1. On the Main Menu, tap
2. Tap
3. Tap
.
. Your Mio will calculate the route from your current location.
.
How do I navigate to a recent place?
To make navigating to an address easier, your Mio will automatically save all your
start locations and destinations in a list of recent places.
1. On the Main Menu, tap
2. Tap
.
.
3. Tap a recent place.
4. Tap
. Your Mio will calculate the route from your current location.
How do I edit a saved location in My Places?
1. On the Main Menu, tap
.
2. Select a location to edit.
3. Tap
.
4. Complete the following:
If you want to… Then…
save the location as Home,
rename the location,
delete the location,
24
tap
tap
OK
tap
.
. After you have edited the name, tap
.
.
How do I search for a POI?
A POI (Point of Interest) is a named site, feature, landmark or public venue which
can be displayed as an icon on the map. POIs are grouped by category, such as
petrol stations, parks, beaches and museums.
How do I nd the nearest POIs using Near Me?
Near Me services allows you to quickly search the local area for common types of
important POIs.
Search for the nearest restaurants, cafes, fast-food premises and other
:
●
dining establishments.
Search for the nearest petrol stations.
:
●
●
●
●
●
Search for the nearest parking places.
:
Search for the nearest hotels and motels.
:
Search for the nearest banks and ATMs.
:
Search for the nearest emergency services, including hospitals and
:
police.
1. On the Main Menu, tap
.
2. Select the desired POI category. The search result will be listed in the Select
POI screen.
3. Tap
or
to scroll up or down the list. Select the desired item to display the
destination screen.
4. Complete the following:
If you want to… Then…
calculate the route and start
navigating,
save the location as a favourite,
explore the map,
tap
tap
tap
.
.
.
25
How do I nd the POIs using EXPLORE?
Note: EXPLORE is not available on all models and is only available in selected countries.
Depending on your Mio model, you can search for the POIs using Explore map.
The Explore map allows you to explore the local area to nd Points of Interest
(POIs) or navigate to an address. If you do not have a GPS x, the map will
display your last known position.
1. On the Destination screen, tap
.
2. On the Explore map, you can:
● View the information of the selected POI that is shown at the top of the
screen.
● Tap and drag the map to explore your desired local area.
● Tap the map to display a POI Cluster showing POIs in the surrounding
area. Tap a POI icon to show more information and navigate to the POI.
Item Description
Information area Display the information of the selected POI/position.
POI Cluster To display a POI Cluster, tap an area on the Explore
Current position
/ To zoom in or out, tap and hold or . Zooming in or
map.
Tap an icon or street name in the POI Cluster to view
information and options.
Your current position is marked with .
Tap to display the POI Display screen, allowing you to set
POI preferences.
out will increase or decrease the area contained within
the Explore area.
26
How do I nd a POI using the POI Cluster?
Tapping on the POI selected will bring up the screen with the POI destination
details.
Complete the following:
If you want to… Then…
calculate the route and start
navigating,
save the location as a favourite,
explore the map,
tap
tap
tap
.
.
.
How do I set my POI preferences?
Points of Interest (POIs) are grouped into categories. You may choose to either
display (or hide) icons of all POI categories on the Map screen, or only display the
icons from selected categories.
For example, you may only be interested in entertainment venues and want to
disable other categories such as schools.
1. Tap .
27
2. Complete the following:
If you want to… Then…
display all POI icons (i.e. icons
from all categories),
display no POI icons, tap
select a specic POI category icon
for display on the Map screen,
return to the Explore map,
Note: Your preferences are automatically saved.
How do I search for a POI by type?
Show all
tap
Hide all
Note: Hiding POIs will stop you from nding them when using
explore mode/cluster search.
tap the required POI category to show (
hide (
Repeat until all required categories are selected.
tap
.
.
) or
) on the Map screen.
.
1. On the Main Menu, tap
2. Tap
.
.
3. Complete the following:
If you want to… Then…
search for the POIs near your
current location,
search for the POIs in a specied
city or area,
28
tap
tap
city/area, tap OK.
.
. After you have entered a name of a
If you want to… Then…
search for the POIs on your route,
tap .
search for the POIs near your
destination,
4. Complete the following:
If you want to… Then…
search for POIs by keyword,
search for restaurants, cafes, fastfood premises and other dining
establishments,
search for petrol stations,
search for parking places,
view more POI types,
search for hotels and motels,
search for banks and ATMs,
search for emergency services,
5. Tap the desired item from the list.
6. Complete the following:
tap
tap . After you have entered a keyword, tap
OK
tap
tap
tap
tap
tap
tap
tap
.
.
.
.
.
. Select a POI type.
.
.
.
If you want to… Then…
calculate the route and start
navigating,
save the location as a favourite,
explore the map,
tap
tap
tap
.
.
.
How do I search for a POI by keyword?
Complete the following to navigate to a POI or the street address that you nd by
keyword.
1. On the Main Menu, tap
2. Tap
. Enter the keyword of the POI or Street Address that you want to
search.
.
29
3. Complete the following:
If you want to… Then…
calculate the route and start
navigating,
save the location as a favourite,
explore the map,
tap
tap
tap
.
.
.
30
Customising the system settings
1. On the Main Menu, tap
.
2. Select the option you want to customise from the Settings screen.
3. Once you change the settings and return to the previous screen, your
preferences are automatically saved.
Settings screen options and the order of the options may differ from the above,
depending on your region, maps installed or model of Mio.
While changing the settings, the check box next to the option indicates the setting
status:
●
: on/enabled
●
: off/disabled
Audio
If you want to… Then…
increase/decrease the volume,
mute/unmute,
hear which letter you have tapped when you
tap the touch screen,
/ .
tap
You can simply tap on the Volume bar so
that the volume will be set immediately at
the position you tapped. The Volume bar
indicates the current volume level.
tap
The speaker icon indicates the status:
tap
.
: muted : unmuted
Touch audio
to turn it on or off.
Screen
If you want to… Then…
change the displayed screen mode, tap
Screen mode
●Auto
between Day and Night modes.
●Day
Day mode.
●Night
Night mode.
and select:
: Set to automatically change
: Set the screen to be displayed in
: Set the screen to be displayed in
31
If you want to… Then…
change the screen brightness in day /night
mode,
tap
brightness bar.
The brightness bar indicates the brightness
level.
You can simply tap on the brightness bar
so that the screen brightness will be set
immediately at the position you tapped.
Note: Your Mio can heat up when the brightness scale is set
high, therefore, use lower brightness whenever acceptable.
Safety
If you want to… Then…
enable/disable the warning message after
long-distance driving,
enable/disable speed limit alerts, which
warn you of the speed limit on any given
road,
set the speed limit alerts manually, tap
enable/disable a visual warning if the screen
is accessed in a moving vehicle,
set how you want to receive the camera and
safety alerts,
Driver fatigue alert
tap
● tap
off.
● tap
Set manual speed alert
speed limit or turn it off.
Warn me not to operate my Mio while
tap
driving
Safety Camera
tap
Camera
Light Camera
select:
● No alerts
● Visual alert
● Visual & Audible alerts
/ on the Day brightness/Night
to turn it on or off.
Speed limit display
Speed limit alerts
●Off
: Disable the speed limit alert.
●Auto
: Set the system to alert
to turn it on or
and select:
automatically while your speed is
above the limit.
●Speed limit + 5 km/h (+ 3 mph)
the system to alert while your speed
is 5 km/h (3 mph) or more above the
limit.
●Speed limit + 10 km/h (+ 7 mph)
Set the system to alert while your
speed is 10 km/h (7 mph) or more
above the limit.
to select the
to turn it on or off.
Mobile Safety
/
Average Safety Camera
/
Dangerous zones
/
/
to
Red
: Set
:
32
Route options
If you want to… Then…
set route type options for your route, tap
Route type
preference from the list:
●Fastest
fastest when navigating.
●Easiest
number of turns and favours motorways
where appropriate.
●Economical
number of stops, turns and urban areas
which should save on fuel usage.
●Shortest
physical length.
Note: If you do not select the preferred route type, Choose
on map is set as default for this option. All of the four route
types will be calculated after your search. Then, you have to
select one route type on the map to start navigating.
set types of road options for your route, tap
Types of road
preference from the list.
Note: Avoiding ferry routes may prevent you from navigating
between certain countries, even when a bridge or tunnel
exists.
display the installed custom POI, tap
Custom POI alerts
Map display
to select your route type
: The route that should be the
: The simplest route with the least
: The route with least
: The route with the shortest
. Select your road
.
If you want to… Then…
enable/disable automatic zooming during
navigation,
Auto-zoom map when navigating
tap
turn it on or off.
If selected, the Map screen will automatically
zoom in or out, depending on your speed, to
allow optimal viewing of your route.
display “no entry” icons on “no entry” roads
on the Map screen,
Show no-entry road signs
tap
or off.
When turned on, the map display
performance can slow down due to the
number of no entry roads in some major
cities.
set your Map screen preference, tap
Map
of the Map screen.
to
to turn it on
to select between a 3D or 2D view
33
My Maps
If you want to… Then…
view the map information, tap
select a set of maps to load, tap
check the expiring maps, tap
Map Version
maps, providing the following information:
● Name
● Date
● Version/Build number
● Coverage area
Map set
from the list.
Expiring maps
that are to expire soon.
to display a list of all
, then select your preference
to display a list of maps
Language
Note: The available settings of the Language option can be customised by adding/deleting the voice le
through MioMore Desktop when your Mio is connected to the computer. For more information, refer to the My
Mio section in “What is MioMore Desktop?”
If you want to… Then…
change the on-screen language, tap
change the voice scheme, tap
Language
language from the list.
Voice
scheme from the list.
and select your preferred
and select your preferred voice
Units
If you want to… Then…
change the distance units, tap
change the time format, tap
change the date format, tap
Distance units
preferred distance unit type.
Time format
preferred time format.
Date format
preferred date format type.
Time Zone
If you want to… Then…
set the time zone automatically, select
change the time zone manually, select
setting by tapping
34
and then select your
and then select your
and then select your
Auto time zone
Manual time zone
.
/ .
, then adjust the
Device
If you want to… Then…
delete the saved information on your Mio, tap
restore factory default settings, tap
reset the GPS, tap
record a GPS log of your trip, tap
Delete saved information
● Tap
the warning dialog box displays. The
data saved in My Places will be deleted.
● Tap
tap
displays. The data of recent locations will
be deleted.
● Tap
when the warning dialog box displays.
The planned trips saved on your Mio will
be deleted.
Restore factory defaults
When the warning dialog box displays, tap
Yes
. Your Mio will restart.
Note: The Restore factory defaults option allows you to
restore default factory settings but will not delete recent
locations or saved My Places destinations.
Reset GPS
When the warning dialog box displays, tap
Yes
.
Note: Occasionally, the GPS x may need to be reset.
This may occur if the receiver has been transported a long
distance since last being used; for example, to a different
country, and is still trying to establish the previous position.
GPS logging
:
Delete My Places
and tap
Delete recent locations
Yes
when the warning dialog box
Delete planned trips
and tap
.
.
to turn it on or off.
Yes
and
when
Yes
Demo
Note: Demo will begin when the device is connected to power via genuine Mio AC Chargers.
If you want to… Then…
enable a shop demonstration of Mio Spirit to
be played,
select a demonstration country from the list
and tap
Start
.
Tap OK. Your Mio will restart.
When your Mio is in Shop demo mode, you
will see the navigation demonstration of the
pre-dened route without having to set a
destination.
Note: You cannot operate your Mio properly in Shop demo
mode.
35
Help
If you want to… Then…
view copyright and trademark information, tap
About
.
36
What is MioMore Desktop?
MioMore Desktop is a suite of tools you can use to access greater functionality
and product information via your computer.
MioMore Desktop allows you to:
● Obtain software updates.
● Manage maps.
● Manage custom POIs.
● Manage safety camera subscriptions.
Can I use MioMore Desktop with my computer?
Ensure your computer has the following minimum system requirements before
installing MioMore Desktop:
● IBM compatible PC
● Microsoft Windows Vista, Windows 7 or Windows 8
● Internet Explorer 6 or later versions
● USB port
● Internet connection for activation
Note: Microsoft .NET 2.0, 3.0 and 3.5 will be installed on your computer as part of the installation of MioMore
Desktop.
How do I install MioMore Desktop onto my computer?
CAUTION:
cause your Mio to crash.
1. Close all programs on your computer.
2. Download the ZIP le of the MioMore Desktop Application Installer DVD for
your Mio from Mio website (
3. Double-click
4. Select your preferred language for MioMore Desktop.
5. Click
6. Follow the screen prompts to install MioMore Desktop:
7. If prompted to connect your Mio to your computer, complete the following:
Do NOT delete any les that are pre-installed on your Mio. Deleting the les can
service.mio.com), and unzip the le.
install.exe
Install Software
● Review and accept the Licence Agreement for MioMore Desktop when
prompted.
● Select a destination folder for MioMore Desktop when prompted.
● When the installation is complete, click
to run the MioMore Desktop Installer.
Install MioMore Desktop
, then
Finish
.
. MioMore Desktop will open.
37
● Plug the large end of the USB cable (supplied) directly into a USB port on
your computer (not a USB hub) and plug the small end into the USB Socket
on the bottom of your Mio.
● Where possible, plug the USB cable into a USB port at the back of your
computer.
● If prompted to update your Mio software, follow the on-screen prompts.
8. You are now ready to use MioMore Desktop for your Mio.
From now on, you can access MioMore Desktop via:
MioMore Desktop
>
.
Start
All Programs
>
>
Mio
Loading the data ISO le as a DVD
After you unzip the ZIP le of the MioMore Desktop Application Installer DVD, you
will nd an ISO le. The ISO le is essential for installing or recovering software,
voice les and subscriptions on your Mio. To use the ISO le, search online and
install a free virtual drive program to load the le as a DVD.
My Subscriptions
Note: Subscription information is not available on all models and is only available in selected countries.
Your Mio contains pre-loaded subscriptions, such as safety camera and travel
book information. For the latest subscription updates, visit:
Note: Safety camera alerts can be enabled to provide warnings when on your route.
How do I purchase a subscription?
www.mio.com
1. Open MioMore Desktop, and then click
2. Select a type of subscription.
3. Select a region.
38
My Subscriptions
.
4. Select a subscription or offer, then click
Mio store
.
Purchase an activation key from the
5. Follow the prompts to purchase your subscription.
A product key will be sent to you via email when you have subscribed. You will
need to use this product key to activate your subscription.
How do I activate my subscription?
1. Open MioMore Desktop, and then click
Unlock Features
.
2. Enter your product key.
3. Follow the prompts to activate your subscription.
How do I update subscriptions on my Mio?
The My Subscriptions section will display a list of subscriptions already installed
on your Mio:
Icon Description
Red Expired subscriptions.
Right click to purchase a new subscription.
Yellow Available subscriptions.
Right click to update and purchase new subscription.
Green Active subscriptions.
No updates are available for these subscriptions.
How do I recover my subscription?
If your subscriptions are deleted and you want to recover them, click
Subscriptions
at the bottom-right corner in My Subscriptions to recover all
subscriptions.
Recover
My Maps
My Maps allows you to install new maps, remove maps from your Mio and
purchase new maps.
Note: The downloaded/purchased map (*.iso) from Mio website will be saved on your computer’s map folder
(e.g. C:\username\Documents\Maps) and then displayed in My Maps. The default map folder may vary
depending on your operating system.
39
Item Description
Loadable Maps
My Mio
Remove maps
A list of maps from the downloaded data ISO le or
available for purchase via the Mio Store website.
● Select a map source and then click
the Map Source section.
● From the map Source section, click
install the selected map to your Mio. Otherwise, click
Upwards
A list of maps installed on your Mio.
Click to remove the selected map from your Mio.
to return to the Loadable Maps section.
Open
Install Maps
to display
to
How do I download a map update?
Occasionally Mio may offer you free updates, including software applications,
maps, and more. If a free map update is available and your Mio is connected to
your computer, a message will display when you rst start MioMore Desktop.
1. From the pop-up message window, click
screen that contains the available updates.
2. Before downloading, you can change the download folder by clicking
Path
.
3. Select the desired map update and click
start to download immediately.
4. During the download operation, you can:
● Stop the download by clicking
● Pause the download by clicking
time by clicking .
40
View
to display the Device Updates
Change
Download
. MioMore Desktop will
.
, and then resume download at a later
5. When nished, the downloaded map update will be displayed in My Maps.
How do I install maps onto my Mio?
Your Mio comes with one or more pre-activated maps. Map les take up space on
your Mio’s internal memory. If you do not use a map le, you can remove it to free
up space. You can later reinstall it to your Mio if required.
You can install maps from the following:
● The downloaded data ISO le.
● The downloaded map update.
● The map that you have purchased separately on a memory card or your Mio
internal memory.
Note: You may need to purchase a Map Product Key to activate maps from the downloaded data ISO le.
1. Open MioMore Desktop, and then click
2. Select a map source (such as the downloaded data ISO le that has been
loaded as a DVD) and then click
● The maps already installed on your Mio are green.
● The maps that are unlocked and ready to be installed to your Mio are
yellow.
● The maps that require activation before being installed to your Mio are
● The maps that are available for purchase from Mio are
Note: If your computer opens Windows Explorer when the downloaded data ISO le has been loaded,
close the Windows Explorer window.
3. Complete the following:
My Maps
Open
to display the Map Source section.
.
blue.
red.
If the map to be
installed is…
yellow go to step 6.
red the map needs to be activated via the Internet before it can be
Then…
installed; continue to step 4.
4. If you connect to the Internet via a dial-up connection, connect to the Internet
now.
5. Follow the prompts to activate your Map Product Key, including:
● Enter the Map Product Key when prompted.
● Your computer will connect to the Internet and activate your Map Product
Key.
● When activation has completed, the map will change colour to
yellow;
continue to step 6.
41
6. Click the map you want to install to your Mio. The map will change colour to
a brighter yellow to indicate it has been selected. To deselect a map, click the
map again.
You may need to install multiple maps to cover the required geographical area.
7. Complete the following:
If you want to… Then…
install a yellow map, go back to step 6.
install a
install the selected maps to your Mio, continue to step 8.
red map, the map needs to be activated via the Internet
before it can be installed; go back to step 4.
8. Select the destination media (Mio internal memory) for the selected maps, then
Install Maps
click
The selected maps will be installed and change colour to
.
green.
Do not disconnect the USB cable from the Mio USB Socket until the installed
map or maps have changed colour to
green.
9. To use your Mio, disconnect the USB cable. You may need to manually reset
your Mio.
How do I remove maps from my Mio?
1. Open MioMore Desktop, and then click
My Maps
.
2. From the My Mio panel, select the check box next to the map you want to
remove.
3. Click
Remove Maps
to remove the selected maps.
4. Conrm that you want to remove the selected map when prompted. The map is
removed from your Mio. You can reinstall these maps at any time via MioMore
Desktop.
Custom POIs
The Custom POIs (Points of Interest) application allows you to create or import
your own POI les. These are called custom POIs. Unlike preinstalled POIs,
custom POIs can be removed from your Mio and can have audio as well as visual
alerts associated with them.
To create your POI les, open Microsoft Excel and then enter the POI location
details (including Longitude, Latitude, Name, and Description) in separate cells.
Always use decimal degrees for coordinates and start a new location from a
File
new line. When done, click
have successfully created a POI CSV le. The following displays the example of
creating the POI le by using Microsoft Excel:
42
Save As
>
to save it as a *.csv le. Now you
Note: Various POI les are available for download free or by subscription from third-party websites. Ensure
that downloaded les are in .csv (Comma Separated Values) format. Mio is not responsible for the content or
accuracy of the information or the reliability or availability of these websites. The use of information regarding
safety camera locations may be subject to local laws in the country of use. You are responsible for checking
that you can use the information in your country or in the country where the information will be used.
How do I install custom Points of Interest?
1. Open MioMore Desktop, and then click
2. In the Add new POIs section, click
Custom POIs
Browse
.
to select a source le.
3. Select the le from your local or network drive, then click
4. From the POI Category section:
If you want to
use an existing custom POI
category,
replace an existing POI, select the
create a new custom POI category, select the
…
Then…
select the
a type from the drop down list.
from the drop-down list, then select
existing POIs
Note: If you want to create a new POI instead, then select Add to
existing POIs.
name for the POI category.
Existing category
Existing category
.
New category
Open
.
option, then select
option and a type
Replace
option, then type a
5. Set Alert setting as required:
43
If you want to
enable a visual warning when a
POI of this category is in close
proximity,
select an icon to display on the
Map screen for POIs of this
category,
select the distance from a POI of
this category at which the visual
warning should display or the
warning chime should sound,
enable a warning sound when a
POI of this category is in close
proximity,
select a custom sound alert le to
play when a POI of this category is
in close proximity,
…
Then…
select the
click
or network drive.
When you have located the icon le, select it and
click
Note: The icon le must be a bitmap (*.bmp or *.png) graphic with a
minimum size of 6x6 pixels and a maximum size of 32x32 pixels.
Note: If you do not select a custom icon, a default icon will display.
select the distance from the
Note: To change the units used to measure distance for this POI
category, from the tools menu click on options and from the general
option select Use metric units check box.
select the
● either select a sound le from the list, or
● Click
Note: If you do not select a custom sound le, a default sound alert
will play.
Visual alert
Browse
Open
from your local or network drive. When you
have located the le, select it and click
to select the icon le from your local
.
Audio alert
Add
to select a sound le (.WAV format)
check box.
Distance
check box.
box.
Open
.
6. Click
Note: Each le corresponds to a POI category; for example, Hotels.csv will be listed on your Mio as the Hotels
category.
Add to device
to add the POI to your Mio.
How do I delete a Custom POI le/category from my Mio?
1. In the Installed POIs section, click
removed from the list, but is not yet deleted.
2. Accept the warning message. The selected le/category is deleted.
Delete
next to the le name. The le is
Image Search
Note: This feature is not available on all models.
Image Search is a MioMore Desktop application powered by Flickr™ allowing you
to download photos.
NavPix™
Note:
that you can navigate to.
How do I search for
1. Open MioMore Desktop, and then click
44
is an image or picture, normally of a location, which contains embedded GPS coordinates
NavPix™
on the Internet?
Image Search
.
2. In the Description eld, enter a search description for the image you are
looking for.
3. Select one of the Sort by options.
4. Click
Note: You can narrow your search by selecting the Advanced search check box and then selecting a city from
the drop-down list or by entering the latitude and longitude details.
Search
display area.
. Thumbnails of the
NavPix™
will be displayed in the
NavPix™
How do I import
1. Select a picture or group of pictures you want to add to your My Places.
2. Click
Add to My Places
NavPix™
.
to My Places?
Unlock Features
If you have purchased a map unlock code or subscriptions for your Mio, you have
to enter the activation key using the Unlock Features application.
Open MioMore Desktop, and then click
Unlock Features
.
45
Note: Make sure you have an active Internet connection for this feature.
Note: The activation key will be sent to you by email, or printed on the inside cover of the box if you purchase
the map update DVD. You can click the link on the screen to purchase an activation key online.
Redeem
Your device does not support the Redeem function.
My Places
My Places includes saved addresses, POIs, and other locations. You can select,
modify and delete places.
Open MioMore Desktop, and then click
My Places
.
Note: Make sure you have an active Internet connection for this feature.
Note: You can install a maximum of 99 locations on your Mio via My Places.
46
How do I sort My Place locations?
You can sort My Place locations by type and name:
If you want to
sort My Place locations by type, click
sort My Place locations by name, click
…
Then…
Type
Name
on the My Places panel.
on the My Places panel.
How do I import or export a location?
Complete the following:
If you want to
import a location from the computer to
your Mio,
export a location from your Mio to the
computer,
Note: You can also import/export a location by clicking File > Import (or Export) > My Places from the top of
MioMore Desktop Menu.
…
Then…
from the My Places panel, click
Locate the le you want to import and then click
Open
.
Note: The supported le format for importing includes: *.KML and
*.KMZ.
from the My Places panel, select a location and
.
Export
.
then click
Enter a descriptive name for the le and then click
Save
Note: The supported le format for exporting includes: *.KMZ.
Import
.
How do I edit a location from the map screen?
1. From the My Places panel select the location you want to edit.
2. Click the location icon on the map.
3. Complete the following:
If you want to
edit the location name, click the location name.
edit the location notes, click
share the location,
…
Then…
Enter a new name or edit the existing name.
The location name is changed in both MioMore
Desktop and your Mio.
Edit notes
Enter notes. The location notes are changed in
both MioMore Desktop and your Mio.
click
An email will open ready to send to your friends.
Your friend will receive the email with links to
either save the image or to save the location in
My Places in MioMore Desktop.
.
.
47
If you want to
delete the location,
export the location,
My Mio
…
Then…
click
Note: You can delete all locations in My Places by clicking Delete
on the My Places panel.
click
Enter a descriptive name for the le and then click
Save
, then click
.
.
Yes
to delete the location.
Open MioMore Desktop, and then click
My Mio
.
How do I change the displayed language for MioMore Desktop?
1. Click
2. Select your preferred language.
Language
.
How do I install or remove a voice le for my Mio?
My Voices is a MioMore Desktop application that allows you to install or remove
voice les on your Mio. To use this feature, make sure that the downloaded data
ISO le has been loaded as a DVD.
1. Click
2. Complete the following:
Note: Voice les take up space on your Mio’s internal memory. If you do not use a voice le, you can remove
it to free up space. You can later reinstall it to your Mio if required. The downloaded data ISO le of your Mio is
needed while installing the voice le.
My Voices
If you want to
install a voice le, in the Available voice les section, select the
remove a voice le, in the Available voice les section, select the
…
.
Then…
voice le you would like to install. Click
selected voices
voice le you would like to remove. Click
selected voices
.
.
Install
Remove
48
How do I backup and restore my Mio?
You can save backups of data from your Mio, and later restore it if required.
1. Click
2. Complete the following:
Backup and Restore
.
If you want to
backup your Mio, click
restore a backup to your Mio, select the backup from the list that you would like
delete a backup, select the backup from the list that you would like
…
Then…
Create new backup
Select the data you would like to backup, then
click OK.
The backup will be saved to your computer. The
backup will be listed on the Backup & Restore
window.
to restore.
Restore
Click
restored to your Mio.
to delete.
Delete
Click
deleted.
, then click OK. The backup will be
, then click OK. The backup will be
.
How do I recover maps and voice les for my Mio?
The Smart Recovery application allows you to recover all data to x your Mio if
a problem occurs during operation, including software, maps, voice les, and
subscriptions.
This feature only functions if you have ever updated your Mio by using the “Device
Updates” feature.
1. To use the Smart Recovery application to recover data, make sure you have
an active Internet connection and the downloaded data ISO le has been
loaded as a DVD.
2. Click
3. The available data will be displayed in the Maps and Voices elds. Select the
Smart Recovery
desired data and click
.
Recover
to recover the data on your Mio.
How do I manually update my Mio?
Occasionally Mio may offer you free updates, including software applications,
maps, voice commands, and more. You can manually check the available updates
via the Device Updates function.
1. Click
Device Updates
updates will display.
. The Device Updates screen that contains the available
49
Note: You can also open the Device Updates screen by clicking the New Update button at the top-right
corner of MioMore Desktop.
2. Complete the following:
If you want to
download the updates, select the available update from the list, and then
stop/pause the download, during the download:
change the download folder, click
…
Then…
Download
lick
● Click
● Click
click
Change Path
.
to stop the download.
to pause the download; when paused,
to resume downloading.
.
3. When completed, the downloaded le will be saved to the assigned folder.
● For software update, the *.exe le will be launched automatically to install
the update.
● For map update, the system will display the My Maps screen automatically
to install the update.
How do I recover keys on my Mio?
The Recover keys application allows you to x your Mio if a problem occurs during
operation. Click the
Recover keys
option in the menu and then follow the prompts
to complete the process.
How do I congure MioMore Desktop?
Note: Depending on your Mio model, certain setting options may not be available.
1. Click
2. Complete the following:
Options
, and then select the desired setting options to congure.
If you want to
keep MioMore Desktop updated, click
change the units of measurement
that MioMore Desktop uses,
50
…
Then…
General
for updates
When you select this option, every time you open
MioMore Desktop, the available service packs
and bug xes will be downloaded from the Mio
server and applied to your Mio.
General
click
Select or clear the
change between imperial and metric units.
Select or clear the
box to change between decimal degrees and
latitude/longitude co-ordinates.
, and then select the
check box.
, and then:
Use metric units
Use decimal degrees
Auto check
check box to
check
If you want to
change the location of where
downloaded updates will be saved,
…
Then…
My Maps
click
Select a folder for the updates. The downloaded
updates are moved to the new location.
, and then click
Change
.
51
Reference
What is GPS?
The Global Positioning System (GPS) is available at any time, free of charge, and
is accurate to within 5m (15ft). GPS navigation is made possible by a network
of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite
transmits a range of signals which are utilized by GPS receivers, such as your
Mio, to determine an exact location. Although a GPS receiver can detect signals
from up to 12 satellites at any time, only four signals are required to provide a
position or "GPS x" (latitude and longitude), for vehicle navigation systems.
How does my Mio receive GPS signals?
Your Mio receives GPS signals via the internal GPS antenna. To guarantee
the optimum GPS signal strength, ensure your Mio is outdoors, or in a vehicle
outdoors, and has an unobstructed view of the sky. GPS reception is not usually
affected by weather; however, very heavy rain or snow may have a negative effect
on your reception.
Caring for your Mio
Taking good care of your Mio will ensure trouble-free operation and reduce the
risk of damage to your Mio:
● Keep your Mio away from excessive moisture and extreme temperatures.
● Avoid exposing your Mio to direct sunlight or strong ultraviolet light for
extended periods of time.
● Do not place anything on top of your Mio or drop objects on your Mio.
● Do not drop your Mio or subject it to severe shock.
● Do not subject your Mio to sudden and severe temperature changes. This
could cause moisture condensation inside the unit, which could damage
your Mio. In the event of moisture condensation, allow your Mio to dry out
completely before use.
52
● The screen surface can easily be scratched. Avoid touching it with sharp
objects. Non-adhesive generic screen protectors designed specically for use
on portable devices with LCD panels may be used to help protect the screen
from minor scratches.
● Never clean your Mio when it is turned on. Use a soft, lint-free cloth to wipe the
screen and the exterior of your Mio.
● Do not use paper towels to clean the screen.
● Never attempt to disassemble, repair or make any modications to your Mio.
Disassembly, modication or any attempt at repair could cause damage to your
Mio and even bodily injury or property damage and will void any warranty.
● Do not store or carry ammable liquids, gases or explosive materials in the
same compartment as your Mio, its parts or accessories.
53
Revision: R01
(8/2018)
Trademarks
All brand and product names are trademarks or registered trademarks of their
respective companies.
Disclaimer
Specications and documents are subject to change without notice.
Speed Limit
Mio products are designed to be used as an aid to safer driving. Mio does not
condone speeding or any other failure to comply with your local trafc laws. It is
your responsibility to drive within the posted speed limit at all times and to drive
in a careful manner. Mio accepts NO liability whatsoever for you receiving any
speeding nes or points on your license through using this device. Mio does
not guarantee the accuracy of the data contained within this database either
expressed or implied. In the event you receive a ne or any other penalty for
speeding or contravention of any trafc law, or are involved in an accident, Mio
is not responsible for any damages of any type. In some countries the data
information regarding speed limits may conict with local law and/or regulations. It
is your responsibility to make sure that your use of the data is in compliance with
local laws and/or regulations. Usage is at your own risk.
Safety Camera POIs
Mio products are designed to be used as an aid to safer driving. You can receive
messages to alert you to locations of safety cameras, which will enable you to
monitor your speed through these areas. Mio does not warrant that all types
and locations of safety camera data are available, as cameras may be removed,
relocated or new cameras installed. Mio does not condone speeding or any other
failure to comply with your local trafc laws. It is your responsibility to drive within
the posted speed limit at all times and to drive in a careful manner. Mio accepts
NO liability whatsoever for you receiving any speeding nes or points on your
license through using this device. Mio does not guarantee the accuracy of the
data contained within this database either expressed or implied. In the event you
receive a ne or any other penalty for speeding or contravention of any trafc law,
or are involved in an accident, Mio is not responsible for any damages of any type.
In some countries the data information regarding safety or speed cameras may
conict with local law and/or regulations. It is your responsibility to make sure that
your use of the data is in compliance with local laws and/or regulations. Usage is
at your own risk.
54
Loading...