Mio 7700 LM User Manual

Download

Hardware

User Manual

Spirit 7700 Series

To discourage theft, do not leave your Mio, mounting bracket or any cables in plain view in an unattended vehicle.

Important safety information

PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s safety or make it illegal to operate in some jurisdictions.

Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or modifications. Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications. It is your sole responsibility to place, secure and use your Mio in a manner that will not cause accidents, personal injury or

property damage. Always observe safe driving practices. Do not mount your Mio in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other

safety equipment. Do not operate your Mio while driving. Before you use your Mio for the first time, familiarize yourself with your device and its operation. On main roads, the distance to an exit calculated by your Mio may be further than the distance shown on road signs. Road signs

show the distance to the start of an exit while your Mio shows the distance to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow distance information on road signs.

The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are responsible for checking that you can legally use the information in your country or in the country where the information will be used.

Do not handle your Mio while it is hot. Let the product cool, out of direct sunlight. At full power, prolonged listening to your Mio via headphones or earphones can damage the ear of the user.

Do not expose your Mio to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit.

Warning Notice to Drivers in the United States

State law may prohibit drivers in states such as Arizona, California and Minnesota from mounting objects on their windshields while driving. Please make sure you research and follow your most current State laws. An alternative mounting option may be provided in the box with your product; or see our website for additional mounting alternatives. Mio does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice.

CAUTION:

Caution:

Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Mio disclaims all liability for installation or use of your Mio that causes or contributes to death, injury or property damage or that violates any law.

Home charger-specific safety information

To charge your Mio from the mains power, use the home charger (Input: 100-240V AC 50-60Hz; Output: 5V DC 2A Max) supplied by Mio as an accessory (may be sold separately). Using other home chargers with your Mio could result in serious injury or property damage.

Never use the charger if the plug or cord is damaged. Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water may

cause electrical sparks or fires. Never touch the charger when your hands or feet are wet. Allow adequate ventilation around the charger when using it to operate your Mio or charge the internal battery. Do not cover

the charger with paper or other objects that will reduce ventilation. Do not use the charger while it is inside a carrying case or other container.

Ensure that the charger is connected to a power source with the correct fitting and voltage requirements. The voltage requirements can be found on the home charger casing and/or packaging.

Do not attempt to service the charger as this could result in personal injury. Replace the charger if it is damaged or exposed to excess moisture.

Internal battery-specific safety information

Your Mio contains a non-replaceable internal lithium-ion battery. The battery may burst or explode if mishandled, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery.

Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in fire or water.

About the battery

 Use a specified battery in the equipment. 

disassemble, crush, puncture, or dispose of in fire or water.

 Important instructions (for service personnel only)

The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not



Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the

instructions.

 Replace only with the same or equivalent type recommended by the manufacturer.

 The battery must be recycled or disposed of properly.

 Use the battery only in the specified equipment.

Only use the correct home charger (may be sold separately) or in-car charger supplied by Mio to charge your Mio internal battery.

Only use your Mio internal battery with your Mio unit. The Mio battery will stop charging when the ambient temperature is less than 0ºC (32ºF) or more than 40ºC (104ºF).

WARNING

Marking labels located on the exterior of your Mio indicate the regulations that your model complies with. Please check the marking labels on your Mio and refer to the corresponding statements in this chapter. Some notices apply to specific models only.

This product must not be disposed of as normal household waste, in accordance with the EU directive for waste

Compliance

cancer, birth defects or reproductive harm. This Notice is being provided in accordance with California’s Proposition 65.

For regulatory identification purposes: Mio Spirit 7700 Series is assigned a model number of N602.

Products with the CE marking comply with the Radio Equipment Directive (RED) (2014/53/EU), the Electromagnetic Compatibility Directive (2014/30/EU) and the Low Voltage Directive (2014/35/EU) - issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Standards:

 EN 301 489-1  EN 301 489-19  EN 303 413  EN 55024:2010 + A1:2015  EN 55032:2015  EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter the conformity of the product with the CE Marking.

This product, its packaging and its components contain chemicals known to the State of California to cause

Declaration of conformity

Hereby, MiTAC declares that this Mio Spirit 7700 series is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

WEEE

electrical and electronic equipment (WEEE - 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point.

Important safety information ......................................................................................................................... 2

Home charger-specific safety information ............................................................................................. 3

Internal battery-specific safety information........................................................................................... 3

Compliance ................................................................................................................................................... 4

WEEE .............................................................................................................................................................. 4

Welcome ............................................................................................................................................................. 6

Important information for using the manual ......................................................................................... 6

Disclaimer ..................................................................................................................................................... 6

Mounting your Mio in a vehicle ...................................................................................................................... 7

Getting to know your Mio ............................................................................................................................... 8

How do I turn on my Mio? ............................................................................................................................... 9

Using the power button .............................................................................................................................. 9

Resetting the device .................................................................................................................................... 9

How do I charge the battery? ....................................................................................................................... 10

How do I charge the battery in a vehicle? ............................................................................................. 10

How do I charge the battery at home or work? ................................................................................... 10

How do I connect the device to my computer? .........................................................................................11

Reference .......................................................................................................................................................... 12

What is GPS? .............................................................................................................................................. 12

How does my Mio receive GPS signals? ................................................................................................ 12

Caring for your Mio ................................................................................................................................... 12

Troubleshooting ......................................................................................................................................... 13

Convention

Type of Information

Bold Icon

Description

Term

Description

Welcome

Thank you for purchasing this Mio. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as your first point of reference.

Important information for using the manual

It is important to understand the terms and typographical conventions used in this manual.

Formatting

The following formatting in the text identifies special information:

Components or items displayed on screen, including buttons, headings, field names and

options.

Italics Indicates the name of a screen.

Icons

The following icons are used throughout this manual:

Note

Tip

Warning

Terms

The following terms are used throughout this manual to describe user actions.

Press Press and release a button quickly.

Tap Press and release an item displayed on the touch screen.

Select Tap an item in a list or tap a command from a menu.

Disclaimer

Not all models are available in all regions.

Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document.

Mio operates a policy of ongoing development. Mio reserves the right to make changes and improvements to any of the products described in this document without prior notice. Mio does not warrant that this document is error-free. The screenshots and other presentations shown in this manual may differ from the actual screens and presentations generated by the actual product. All such differences are minor and the actual product will deliver the described functionality as presented in this User Manual in all material respects.

Revision: R00 (4/2018)

CAUTION:

mirror.

Mounting your Mio in a vehicle

 Never mount your Mio where the driver’s field of vision is blocked.  If the windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In

this instance, please mount your Mio where there is a “clear area” - usually just beneath the rear-view

Getting to know your Mio

❶

Power button

❷

Power indicator

❸

Slot for MicroSD memory card

❹

Touch screen

❺

Microphone (not on all models)

❻

Magnetic connectors

❼

Speaker

❽

Reset button

❾

Connector for in-car charger, USB cable* and home charger* *may be sold separately

How do I turn on my Mio?

Using the power button

For the initial start-up, press and hold the power button for 2 seconds to turn on your device.

For normal operation, turn off the device by briefly pressing the power button. Your Mio will enter a suspended state. When you next briefly press the power button, your Mio will return to the Main Menu.

To turn off your Mio, press and hold the power button for 2 seconds.

Resetting the device

Occasionally, you may need to perform a hardware reset when your Mio stops responding; or appears to be “frozen” or “locked-up.” Insert a small rod, such as a straightened paperclip, into the reset button of your device.

CAUTION:

How do I charge the battery?

The battery may not be fully charged when you use your Mio for the first time.

For optimal performance of the battery, note the following:

 Do not charge the battery when the temperature is high (e.g. in direct sunlight).  There is no need to fully discharge the battery before charging.  When leaving your Mio for long periods, turn off your Mio to save battery power.

How do I charge the battery in a vehicle?

To charge your Mio in a vehicle, plug the in-car charger into on the mount and the other end into the vehicle power socket.

How do I charge the battery at home or work?

You can use an optional home charger to charge the battery.

To charge your Mio using a mains power socket, plug the home charger cable into on the mount and the mains power charger into the power socket.

details).

The home charger is not included with all models and may be purchased separately (see

www.mio.com for

CAUTION:

How do I connect the device to my computer?

1. Turn on your computer.

2. Plug the large end of the USB cable (may be sold separately) directly into a USB port on your computer

(not a USB hub) and plug the small end into on the device.

mass-storage device. Do NOT delete any files that are pre-installed on your Mio. Deleting the files can cause your Mio to crash.

When your Mio is turned on and connected to a computer, it is recognized as an external

Reference

What is GPS?

The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Mio, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals are required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation systems.

How does my Mio receive GPS signals?

Your Mio receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength, ensure your Mio is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. GPS reception is not usually affected by weather, however, very heavy rain or snow may have a negative effect on your reception.

Caring for your Mio

Taking good care of your Mio will ensure trouble-free operation and reduce the risk of damage to your Mio:

 Keep your Mio away from excessive moisture and extreme temperatures.  Avoid exposing your Mio to direct sunlight or strong ultraviolet light for extended periods of time.  Do not place anything on top of your Mio or drop objects on your Mio.  Do not drop your Mio or subject it to severe shock.  Do not subject your Mio to sudden and severe temperature changes. This could cause moisture

condensation inside the unit, which could damage your Mio. In the event of moisture condensation, allow your Mio to dry out completely before use.

 The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic

screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches.

 Never clean your Mio when it is turned on. Use a soft, lint-free cloth to wipe the screen and the exterior of

your Mio.

 Do not use paper towels to clean the screen.  Never attempt to disassemble, repair or make any modifications to your Mio. Disassembly, modification

or any attempt at repair could cause damage to your Mio and even bodily injury or property damage and will void any warranty.

 Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your

Mio, its parts or accessories.

Problems

Solutions

Troubleshooting

If you encounter a problem you cannot solve, contact an authorized service centre for assistance.

Your Mio does not turn on when using battery power.

The remaining battery power may be too low to operate your Mio. Charge the battery using the in-car charger, home charger (may be sold separately) or USB cable (may be sold separately), then try again.

Screen responds slowly. The remaining battery power may be too low to operate your Mio. If

the problem still persists, reset your Mio.

Screen freezes. Reset your Mio.

Screen is hard to read. Increase the screen brightness.

Cannot establish a connection with a computer.

Ensure that your Mio and your computer are both turned on before trying to establish a connection.

Make sure that the cable is securely plugged into the USB port on your computer and on your Mio. Connect the USB cable (may be sold separately) directly to your computer, not a USB hub.

Reset your Mio before connecting the USB cable (may be sold separately). Always disconnect your Mio before you restart your computer.

Software

User Manual

Spirit 7700 Series

Welcome ............................................................................................................................................................. 4

Important information for using the manual ......................................................................................... 4

Disclaimer ..................................................................................................................................................... 4

How do I get started? ....................................................................................................................................... 5

How do I use the touch screen? ..................................................................................................................... 6

Navigating on the screen............................................................................................................................ 6

Main Menu .................................................................................................................................................... 6

How do I navigate through the menu screens?...................................................................................... 7

How do I use the Keyboard screen? ......................................................................................................... 7

How do I go from A-B? ..................................................................................................................................... 9

How do I use the FIND wizard? ................................................................................................................. 9

How do I plan my first trip? ..................................................................................................................... 10

How do I preview the destination on map? ...........................................................................................11

How do I preview a route? ........................................................................................................................11

Truck mode ................................................................................................................................................. 12

Pedestrian mode ........................................................................................................................................ 13

How do I view my route? ............................................................................................................................... 14

How do I select the route type? .............................................................................................................. 14

The driving map.......................................................................................................................................... 14

How do I change the route configuration? ........................................................................................... 15

How do I view my route statistics? ........................................................................................................ 16

How do I adjust the volume? .................................................................................................................. 16

How do I zoom in/out the map? .............................................................................................................

Advanced routing functions ..................................................................................................................... 17

How do I create a trip with multiple stops? ............................................................................................... 19

How do I capture a location or a journey? ................................................................................................. 21

How do I capture the GPS coordinates of my location? .................................................................... 21

How do I capture a journey?.................................................................................................................... 21

How do I navigate to a location I have captured? ............................................................................... 22

How do I navigate to the saved car location? ...................................................................................... 22

How to view a journey I have captured? ............................................................................................... 22

My Places .......................................................................................................................................................... 23

How do I save a location as My Place or Home? ................................................................................. 23

How do I navigate to a location I have saved? ..................................................................................... 23

How do I navigate to Home? .................................................................................................................. 24

How do I navigate to a recent place? .................................................................................................... 24

How do I edit a saved location in My Places? ...................................................................................... 24

How do I navigate to a NavPix™? .......................................................................................................... 25

How do I search for a POI? ............................................................................................................................ 27

How do I find the nearest POIs using Near Me? .................................................................................. 27

How do I find the POIs using EXPLORE? ............................................................................................... 29

How do I search for a POI by type? ........................................................................................................ 31

How do I search for a POI by keyword? ................................................................................................ 32

What can I customise? ...................................................................................................................................33

Audio ............................................................................................................................................................33

Screen ..........................................................................................................................................................33

Safety .......................................................................................................................................................... 34

Route options ............................................................................................................................................. 35

Map display ................................................................................................................................................ 36

My Maps ..................................................................................................................................................... 36

Language .................................................................................................................................................... 36

Units ............................................................................................................................................................. 37

Time Zone ................................................................................................................................................... 37

Trip Meter .................................................................................................................................................... 37

Device .......................................................................................................................................................... 37

Demo .......................................................................................................................................................... 38

Help ............................................................................................................................................................. 38

What is MioMore Desktop? .......................................................................................................................... 39

How do I install MioMore Desktop onto my computer? ................................................................... 39

Loading the data ISO file as a DVD ....................................................................................................... 40

My Subscriptions....................................................................................................................................... 40

My Maps ...................................................................................................................................................... 41

Custom POIs .............................................................................................................................................. 44

Photo Album .............................................................................................................................................. 46

Image Search ..............................................................................................................................................50

Application Gallery .................................................................................................................................... 51

Unlock Features .........................................................................................................................................

Redeem ........................................................................................................................................................ 53

MY PLACES.................................................................................................................................................. 53

TRIP PLANNER ........................................................................................................................................... 55

MY MIO ....................................................................................................................................................... 57

For more information ..................................................................................................................................... 61

Point of Interest categories ...................................................................................................................... 61

Online support .......................................................................................................................................... 64

Registration................................................................................................................................................ 64

Speed limit ................................................................................................................................................. 64

Safety camera POIs .................................................................................................................................. 64

Copyright ................................................................................................................................................... 64

Convention

Type of Information

Bold Icon

Description

Welcome

Thank you for purchasing this Mio. This manual has been prepared to guide you through the operation of your Mio from first set-up through to continuous use. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as your first point of reference.

Important information for using the manual

It is important to understand the terms and typographical conventions used in this manual.

Formatting

The following kinds of formatting in the text identify special information:

Mio components or items displayed on screen, including buttons, headings, field names and options.

Italics Indicates the name of a screen.

Icons

The following icons are used throughout this manual:

Note

Tip

Warning

Disclaimer

Read the Important Safety Information Position your Mio in your vehicle

CAUTION:

Turn your Mio on

Select your preferred language

Read the warning message

View the Tutorial

Skip

Show tutorial on start-up

Main Menu   Help  View

Tutorial

Customise the device

Unlock your Mio

Set up Home

Cancel

How do I get started?

The first time you use your Mio it may take several minutes to establish a GPS connection.

How do I turn my Mio on for the first time?

To get started for the first time, complete the following steps:

Follow the instructions in the Quick Start Guide.

the vehicle airbags and safety devices.

Your Mio will turn on and display the Language screen.

From the Select Language screen, tap your preferred language.  You can change your preferred language while using your Mio.

The Safety Agreement screen will display after you have selected your preferred language. Read the Safety Agreement message. To confirm that you have read and understood the message, tap

 To move forward through the Tutorial screen, tap  To skip the Tutorial screen, tap

To prevent the Tutorial from displaying on each start-up, tap the

deselect it. To enable the tutorial again, select the option from

Follow the on screen instructions to select your preferred distance unit, date format, and time format.

Depending on your Mio model, you may need to enter a Startup Key (which is printed on the side of the box) and then tap

It is recommended that you keep a copy of the Startup Key in a safe place.

The Home setup wizard only appears on the first time you start your Mio.

 Tap  You can tap

When you have finished the steps above, the Main Menu screen will display. If you have a GPS fix, you can start to use Mio to plan your trip.

Ensure that your Mio does not obstruct the driver's view, or interfere with the operation of

. To view the previous screen, tap .

to unlock the device. You will only have to do this the first time you use your Mio.

to set up your home immediately using the address-entry wizard.

to skip the wizard, and then select you home later in My Places.

option to

Tap

Select

How do I use the touch screen?

Navigating on the screen

To operate your Mio, touch the screen with your fingertip. You can perform the following actions:



Press and release an item displayed on the touch screen.



Tap an item in a list or tap a command from a menu.

Main Menu

The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to customise your Mio, view saved locations as My Place/Home, and search for POIs nearby, and so on.

Main Menu screen options and the order of the options may differ from the above, depending on your

region, maps installed or model of Mio.

Tap to show the next page of Main Menu.

❶

Search for places, areas and streets to help plan your route.

❷

Display the Map screen.

❸

Access your saved locations.

❹

Configure your Mio to enhance your navigation experience.

❺

Explore the area around your current position or destination.

❻

Add or begin a planned trip with multiple waypoints.

❼

Display the calculated route in simulation mode.

❽

Record GPS coordinates of a location or a journey.

❾

Select your navigation mode.

❿

Set or navigate to your home address.

⓫

Search for Points of Interest nearby.

How do I navigate through the menu screens?

How do I return to the Main Menu screen?

You can return to the Main Menu screen at any time by:  tapping the MAIN MENU button ( ) in the title bar of the menu screen, which allow you to navigate

through the menu screens easily.

In some menu screens (such as the Keyboard screen), the MAIN MENU button ( ) will not appear

in the title bar. In this instance, you have to tap the BACK button ( ) repeatedly.

How do I use the BACK button in the title bar?

1. From the Main Menu screen, tap the desired menu button to enter the menu screen.

For example, tapping will lead you to the FIND screen.

2. The system provides the BACK button ( ) in the title bar of the menu screen, which allow you to

navigate through the menu screens easily. You can return to the previous screen by tapping the BACK button.

How do I use the tabs in the title bar?

In some menu screens (such as the map Overview screen), the system provides the tab buttons in the title bar that allow you to enter the additional page in the menu screen. Simply tap the desired tab to change the view.

The selected tab will be highlighted as a darker-colour tab.

How do I use the Keyboard screen?

The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing on the screen. A maximum of 99 results will display.

The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet, number, alternate characters and combinations of these.



How do I enter characters/numbers?

 To select a character, tap the character.  To delete a character, tap . Tap and hold to delete the entire text.  To enter numbers, tap .

How can I set my keyboard preference?

1. From the Keyboard screen, tap . The Keyboard preference screen will display.

2. Select the preferred keyboard type from the list.

WARNING: If you want to …

Then …

How do I go from A-B?

destination while driving.

How do I use the FIND wizard?

Your Mio is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. The FIND wizard allows you to search the location easily.

1. On the Main Menu, tap to display the FIND screen.

2. Complete the following:

For your safety, enter destination information before you start a journey. Do not enter a

search for an address,

search all information on the device - city, streets, named sites, features, landmarks or venues,

search for a city/area,

search a location by postcode,

search for a Point of Interest,

search for a location using a GPS coordinate,

search for a street intersection,

navigate to a recently visited location,

For further instructions on searching for a POI, refer to the “How do I search for a POI?” section.

tap .

If you want to …

Then …

How do I plan my first trip?

Using your Mio to plan your first trip is easy. There are several ways to select your destination. Complete the following to navigate to a street address that you know using the FIND address wizard.

 



When it is the first time you use FIND wizard, the Select Country screen will appear before the FIND screen.

Select your country and then you can start searching location. If needed, you can change the country to search location. To select the other country, tap the National Flag button (e.g. ) in the title bar of the Keyboard screen before you search the city.

Complete the following:

calculate the route and start navigating,

save the location as a favourite,

save the location as Home,

explore the map,

tap .

tap

tap .

 . The Edit screen will display. Tap .

Here

FIND

Explore

My Places/Recent places

Home

How do I preview the destination on map?

After searching an address (or a POI), you can preview the destination on map to explore the area near the

location. On the Destination screen, tap the button to display the destination preview map as below.

On the destination preview map, you can:

 Tap the  View the information of your destination that is shown at the top of the Map screen.  Tap on a street/area/POI to display the related information of the location near your destination.  Tap on the map to select the other destination. The information of the selected street/area/POI near your

destination will be displayed. Tapping the check mark will bring up the Destination screen of the selected location.

/ button to zoom in/out the map.



How do I preview a route?

Route simulation is not available on all models.

Depending on your Mio model, you will be able to plan a route in simulation mode that allows you to:

 preview a route.  plan and view a route without a GPS fix, such as when you are inside a building.

The following steps will show you how to preview a route.

1. On the Main Menu, tap .

2. Select a departure point through the Leaving from screen.

If you have a GPS fix, you can simply select the

departure point. Otherwise, use the or

to set the departure point if you want the demonstrated route to start elsewhere.

3. Select a destination point through the Going to screen.

4. When done, tap .

address wizard,

button ( ) so that you do not need to select a

map,

WARNING:

Truck

If you want to …

Then …

Speed limit display

Speed limit alerts

Has Hazmat

5. Select a route type and tap , and the route demonstration will start automatically.

6. The Map screen will display the calculated route in route simulation mode. The simulated route will be

displayed as orange colour.

Truck mode

The Truck mode is not available on all models and is only available in selected countries.

This feature is specifically designed for large vehicles. The Truck mode enables, with the input of your vehicle or trailer details, to calculate safer and more efficient routes to avoid the length/width/height/ weight restricted tunnels and bridges, as well as sharp turns and narrow country lanes.

requirement for a driver to take full responsibility for his behaviour. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage.

How can I plan my route using Truck mode?

Do not rely solely on this product and its features. Using this product does not change the

1. On the Main Menu, tap .

2. Tap

depending on your large vehicle type.

3. Complete the following:

set the details for your truck, enter the following data of the truck:

set how you want to receive the speed limit alerts,

limit the route planning while shipping hazardous materials in the truck,

When in Truck mode, your route will be displayed using icon.

 total truck weight 

maximum axle weight



total truck length



maximum truck width



maximum truck height

You must complete the details of the truck settings

before you can use Truck mode to plan your route.

tap

to turn it on

or off.

tap

to turn it on or off.

Pedestrian

How do I activate Truck mode after the free trial?

Your Mio comes with pre-activated Truck mode service for one-month free trial. You will be prompted to purchase (from Mio e-shop online) and re-activate the service when the trial period has expired.

A product key will be sent to you via email when you have subscribed. You will need to use this product key to activate your subscription. (For more information, refer to the “What is MioMore Desktop?” section.)

Pedestrian mode

The Pedestrian mode allows you to navigate to your destination using roads and paths appropriate for a pedestrian, including road where driving may be prohibited (like pedestrian zones for example).

When in Pedestrian mode, you will not be routed onto motorways and their associated on/off ramps (slip roads). If your destination is more than 10 kilometres (6.3 miles) away, a warning message is displayed indicating that the route is a long way to walk.

How can I set my navigation mode to Pedestrian?

1. On the Main Menu, tap .

2. Tap

When in Pedestrian mode, your route will be displayed using icon.

Fastest, Economical, Easiest

Shortest

Item

Description

Direction and distance of next turn

❶

❸ ❺ ❹

❷

How do I view my route?

How do I select the route type?

Depending on your Mio model, the Select Route Type screen will be displayed when you tap from the Destination screen. All of the four route types (

Select your preferred route and tap to start navigating.

For more information about setting the preferred route type, refer to the Route options section in “What

can I customise?”

The driving map

, and

) will be calculated.

When you select a route type and tap , the Map screen will display. You will be directed to your destination by spoken and visual instructions.

The driving map will be displayed automatically when:

 a route is calculated and selected.  the device is reset and the user is on a route.

Alternatively, you can access the Map screen manually by tapping on the Main Menu.

❶

The direction and distance to your next turn.

Tap to repeat the vocal instruction.

Item

Description

Current route

Current position

Address bar

Distance and time information

❷

❸

❹

The current address will be displayed in the text box at the bottom of

Your current route is highlighted.

Your current position is marked with .

the Map screen.

❺

Tap to expand and select the following options:

 DTG (Distance to Go)  TTG (Time to Go)  km/h or mph (speed) and compass heading  ETA (Estimated Time of Arrival)  Time

Depending on your driving route, you may see some icons that provide different information on your Map

screen. Please note that these icons will not be always displayed during your journeys.

For example: the Speed Limit icon ( ) on the Map screen. The Speed Limit icon shows the speed limit of the current road. If greyed out, you are below this speed limit. When over set limit, you will be warned with an audible and visual warning.

How do I change the route configuration?

Tap anywhere on the Map screen to bring up the Map options screen, which allows you to change the route-related configuration.

For more information about changing the route configuration, refer to the following sections in this manual.

How do I view my route statistics?

1. From the Map options screen, tap .

2. Tap the tabs in the title bar to view the additional information in the different screens.

3. Your Mio provides information on your:

 time to destination  distance to go  estimated time of arrival  distance travelled

* Depending on the route calculated, you may see more information on the screen such as the estimated

time/distance to the next stop when your trip contains multiple waypoints.

 time taken for trip  stationary time  TTD/DTG/ETA for the journey*

How do I adjust the volume?

1. From the Map option s screen, tap .

2. The volume buttons will be displayed on the Map screen in translucent mode.

If you want to …

Then …

If you want to …

Then …

3. Complete the following:

increase/decrease the volume,

tap / .

The volume bar indicates the current volume level.

mute/unmute,

tap .

The speaker icon indicates the status:

: muted : unmuted

The volume buttons will automatically disappear after the map is idled for 5 seconds.

How do I zoom in/out the map?

1. From the Map options screen, tap .

2. The zoom buttons will be displayed on the Map screen in translucent mode.

3. Complete the following:

zoom in the map,

zoom out the map,

The zoom buttons will automatically disappear after the map is idled for 5 seconds.

tap and hold .

Advanced routing functions

Smart Routes

Your Mio features Smart Routes, which intelligently anticipates congested roads at peak times so that they can be avoided. Smart Routes does this by using historical, anomalised data from millions of fellow drivers. Since Smart Routes helps you automatically avoid predicted heavy congestion, you will be able to save time and money during your journeys.

Smart Routes is not available on all models and is only available in selected countries.

LearnMe Pro™

With LearnMe Pro technology, your Mio includes an intelligent capability that learns and adapts to your personal driving style. Over time, your Mio learns your preference for road types and driving speeds, turns and more. Your Mio will save the information and provide a more personalised route and accurate time of arrival the next time you plan a trip.

For more information about Smart Routes and LearnMe Pro settings, refer to the Route options section in

“What can I customise?”

Back-On-Track™ automatic rerouting

You will be redirected if you make a wrong turn. A message informing you that your route is being re-calculated will display at the top of the screen.

To cancel a route re-calculation, tap from the Map options screen. A warning will display asking you to confirm the cancellation. If confirmed, both the re-calculation and your current route will be cancelled.

Parking assistant

You will be reminded of the parking information when you are arriving at the destination (within 1 km) of the route. Simply tap the icon on the Map screen to show the nearby parking lots that are sorted by distance.

TRIP PLANNER is not available on all models and is only available in selected countries.

Create New Trip

Add

FIND

Explore

Places/Recent Locations

Here/Return to start

If you want to …

Then …

Add

How do I create a trip with multiple stops?

Depending on your Mio model, you will be able to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order.

1. On the Main Menu, tap . The TRIP PLANNER screen will display.

2. Tap

3. Tap

. The Add as waypoint screen will display. Use the

4. When your search is done, tap . The waypoint is added and the Edit screen will display.

. The Edit screen will display.



menu or

address wizard,

to set the waypoint.

map,

5. Complete the following:

add another waypoint, tap

navigate to your selected destination,



. The Add as waypoint screen will display.

Return to step 3.

Waypoints added after a multi-stop trip has

commenced will not be included in the current route.

tap . The Map screen will display the calculated route.

If you want to …

Then …

Edit

Optimise

Rename

Delete

Optimise

If you want to …

Then …

Delete

Yes

edit the trip,

The

function does not take all factors into account. Your waypoints might be reordered to

tap

, then you can:

 optimise your trip by selecting  change the trip title by selecting  delete the planned trip by selecting

reduce your estimated travel distance. Be sure to confirm the trip on the map and make adjustments as appropriate, particularly if your trip returns to the start location.

How do I edit the waypoints in the trip?

1. On the Main Menu, tap . The Trip Planner screen will display.

2. Tap the trip to edit.

3. Tap a waypoint in the trip. The Preview screen will display.



4. Complete the following:

delete a waypoint, tap

, then select OK.

change the order of the waypoint, tap or .

How do I skip a waypoint during a multi-stop trip?

1. Tap anywhere on the Map screen to bring up the Map opt ions screen.

2. Tap , then select

. The next waypoint will be skipped and the route recalculated to the following

waypoint.

You can also add waypoints during the trip by selecting from the Map options screen.

The capture functionality is not available on all models.

Save

Save as Car

Capture Journey

Main Menu

Route

options

Clear

Save

Yes

How do I capture a location or a journey?

Your Mio has a capture feature which allows you to record GPS coordinates of a location and capture a journey and save them so you can navigate back at a later time.

How do I capture the GPS coordinates of my location?

1. Tap on the Main Menu.

2. The Capture screen will display.

3. Tap

, or wait for 5 seconds. You will hear a shutter sound to indicate that the GPS coordinates have

been saved. The location is saved in My Places.

Tap

will save the current car location in My Places.

How do I capture a journey?

To enable capturing of journeys, you must first enable

. For more information, refer to the “What can I customise?” section.

1. At the beginning of the journey you would like to record, tap

midnight, (ii) the previous time you tapped

2. Travel on your journey. Your Mio will keep a record of where you travel.

3. At the end of your journey, tap

4. On the Capture screen, tap . The Journey screen will display.

5. Tap

, then

. The journey is saved in My Places.

on the Main Menu.

, or (iii) last captured a journey, will be deleted.

from

. All travel that you have made (i) since

 

Find My Car

How do I navigate to a location I have captured?

1. On the Main Menu, tap . The MY PLACES screen will display.

2. Tap the captured destination you want to travel to ( ). The Preview screen will display.

3. Tap . Your Mio will calculate the route from your current location. The Map screen will display.

How do I navigate to the saved car location?

1. On the Main Menu, tap . The MY PLACES screen will display.

2. Tap

3. Tap . Your Mio will calculate the route from your current location.

The Map screen will display.

. The Find My Car screen will display.

How to view a journey I have captured?

1. On the Main Menu, tap . The MY PLACES screen will display.

2. Tap the captured journey you want to view ( ).

Sort by

My Places

My Places has all your saved locations.

How do I save a location as My Place or Home?

1. Search for an address until the Preview screen is displayed.

2. Tap . The Save

screen will display. The location has been added to My Places.

3. To save the location as Home, tap . The Edit screen will display.

Tap . The location has been set as Home.

How do I navigate to a location I have saved?

1. On the Main Menu, tap . The MY PLACES screen will display.

Tap the

: by time : by name : by type

2. Tap the favourite destination you want to travel to. The Preview screen will display.

button on the top of the scrolling buttons to change the sorting order of the items:

If you want to …

Then …

3. Tap . Your Mio will calculate the route from your current location. The Map screen will display.

How do I navigate to Home?

If you have not set an address as Home, the first time you try to navigate to Home you will be prompted to search for an address using the address-entry wizard.

1. On the Main Menu, tap . The MY PLACES screen will display.

2. Tap . The Preview screen will display.

3. Tap . Your Mio will calculate the route from your current location. The Map screen will display.

Once your home has been set on your Mio, simply tap on the Main Menu and you will be directed to

Home quickly.

How do I navigate to a recent place?

To make navigating to an address easier, your Mio will automatically save all your start locations and destinations in a list of recent places.

1. On the Main Menu, tap . The MY PLACES screen will display.

2. Tap . The Recent Locations screen will display.

3. Tap a recent place. The Preview screen will display.

4. Tap . Your Mio will calculate the route from your current location. The Map screen will display.

How do I edit a saved location in My Places?

1. On the Main Menu, tap . The MY PLACES screen will display.

2. Select a location to edit. The Preview screen will display.

3. Tap . The Edit screen will display.

4. Complete the following:

save the location as Home,

rename the location,

delete the location,

tap .

tap . The Keyboard screen will display. After you have edited the name, tap OK.

tap .

NavPix

Item

Description

thumbnail

Slide Show

How do I navigate to a NavPix™?

NavPix™ is not available on all models and is only available in selected countries.

NavPix™ is an image or picture, normally of a location, which contains embedded GPS coordinates that you can navigate to.

To navigate to a NavPix™ location, either a GPS fix must have been available when the NavPix™ was taken, or GPS coordinates have been added using MioMore Desktop.

How do I navigate to a NavPix™ in an album?

For more information about importing the NavPix™ to your Mio, refer to the Photo Album section in

“What is MioMore Desktop?”

1. On the Main Menu, tap . The MY PLACES screen will display.

2. Tap

3. From the list select the album ( ) you want. The album contains your pictures and displays them as

thumbnails.

NavPix™

A thumbnail of a NavPi x™ contained in the album. To select a NavPix™, tap the thumbnail.

Indicates that the picture is a NavPix™, with embedded GPS coordinates.

Displays all images in the album as a full-screen slideshow.

4. Tap the thumbnail of the NavPix™. The NavPix™ will appear in full-screen.



Item

Description

If you want to …

Then …

How do I edit the NavPix™?

1. From the Album screen, tap the thumbnail of the NavPix™. The NavPix™ will appear in full-screen.

2. Tap . The NavPix Details screen will display.

3. Complete the following:

calculate the route and start navigating,

edit the NavPix™,

explore the map,

Tap to start/stop slideshow.

Tap to display the Navpix Details screen.

Tap to calculate the route, open the Map screen and start navigating.

Tap to scroll through your NavPix™.

tap . The Map screen will display.

tap .

 To save the location as Home, tap .  To rename the title of the NavPix™, tap  To delete the NavPix™, tap

tap .

How do I search for a POI?

A POI (Point of Interest) is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums.

How do I find the nearest POIs using Near Me?

Near Me services allows you to quickly search the local area for common types of important POIs.

Search for the nearest restaurants, cafes, fast-food premises and other dining establishments.

Search for the nearest petrol stations.

Search for the nearest parking places.

Search for the nearest hotels and motels.

Search for the nearest banks and ATMs.

Search for the nearest emergency services, including hospitals and police.

Customise the categories for search.

1. On the Main Menu, tap . The Near Me screen will display.

2. Select the desired POI category. The search result will be listed in the Select POI screen.



3. Tap or to scroll up or down the list. Select the desired item to display the destination screen.

4. Complete the following:

If you want to …

Then …

If you want to …

Then …

POI type

Keywords

Delete

calculate the route and start navigating,

save the location as a favourite,

explore the map,

tap . The Map screen will display.

tap . The location will be saved in My Places immediately.

tap .

How do I customise the categories for search?

1. On the Main Menu, tap . The Near Me screen will display.

2. Tap .

3. From the pop-up message screen, do one of the following:

add the categories by POI type, tap

Select the desired category for search.

add the categories by keywords, tap

Enter the keyword of the category for search.

4. To delete the added categories, tap . Select the category to remove and then tap



Item

Description

Information area

POI Cluster Current position

How do I find the POIs using EXPLORE?

EXPLORE is not available on all models and is only available in selected countries.

Depending on your Mio model, you can search for the POIs using Explore map. The Explore map allows you to explore the local area to find Points of Interest (POIs) or navigate to an address. If you do not have a GPS fix, the map will display your last known position.

1. On the Main Menu, tap . The Explore screen will display.

2. On the Explore map, you can:

 View the information of the selected POI that is shown at the top of the screen.  Tap and drag the map to explore your desired local area.  Tap the map to display a POI Cluster showing POIs in the surrounding area. Tap a POI icon to show

more information and navigate to the POI.

❹

❶

❶ ❷

❸

❹

❺

❷

❸

❺

Display the information of the selected POI/position.

To display a POI Cluster, tap an area on the Explore map. Tap an icon or street name in the POI Cluster to view information and options.

Your current position is marked with .

Tap to display the POI Display screen, allowing you to set POI preferences.

To zoom in or out, tap and hold or . Zooming in or out will increase or decrease the area contained within the Explore area.

If you want to …

Then …

How do I find a POI using the POI Cluster?

Tapping on the POI selected will bring up the screen with the POI destination details.

 



Complete the following:

calculate the route and start navigating,

save the location as a favourite,

explore the map,

tap . The Map screen will display.

tap . The location will be saved in My Places immediately.

tap .

How do I set my POI preferences?

Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the Map screen, or only display the icons from selected categories.

For example, you may only be interested in entertainment venues and want to disable other categories such as schools.

1. Tap . The POI Display screen will display.

2. Complete the following:

If you want to …

Then …

Show all

Hide all

If you want to …

Then …

search for the POIs near your If you want to …

Then …

display all POI icons (i.e. icons from

tap

all categories),

display no POI icons, tap

Hiding POIs will stop you from finding them when using

explore mode/cluster search.

select a specific POI category icon for display on the Map screen,

tap the required POI category to show ( ) or hide ( ) on the Map screen.

Repeat until all required categories are selected.

return to the Explore map,

tap .

 Your preferences are automatically saved.

How do I search for a POI by type?

1. On the Main Menu, tap .

2. Tap . The Find a POI screen will display.

3. Complete the following:

current location, search for the POIs in a specified

city or area,

search for the POIs on your route,

search for the POIs near your destination,

tap .

tap . The Keyboard screen will display. After you have entered a name of a city/area, tap OK.

tap .

4. The POI Type Selection screen will display. Complete the following:

search for POIs by keyword,

tap . The Keyboard screen will display. After you have entered a keyword, tap OK.

search for restaurants, cafes, fast-food premises and other dining

tap .

establishments, search for petrol stations,

tap .

If you want to …

Then …

If you want to …

Then …

If you want to …

Then …

search for parking places,

view more POI types,

tap .

tap . The POI Type List screen will display. Select a POI type.

search for hotels and motels,

search for banks and ATMs,

search for emergency services,

tap .

5. The POI List screen will display. Tap the desired item from the list.



6. Complete the following:

calculate the route and start navigating,

save the location as a favourite,

explore the map,

tap . The Map screen will display.

tap . The location will be saved in My Places immediately.

tap .

How do I search for a POI by keyword?

Complete the following to navigate to a POI or the street address that you find by keyword.

1. On the Main Menu, tap

2. Tap . Enter the keyword of the POI or Street Address that you want to search.

3. Complete the following:

calculate the route and start navigating,

save the location as a favourite,

explore the map,

tap . The Map screen will display.

tap . The location will be saved in My Places immediately.

tap .

Depending on your Mio model, certain setting options may not be available.

If you want to …

Then …

Touch audio

If you want to …

Then …

Screen mode

Auto:

Day:

Night:

What can I customise?

There are various customisation options available to enhance your navigation experience.

1. On the Main Menu, tap . The Settings screen will display.

2. Select the option you want to customise from the Settings screen.

3. Once you change the settings and return to the previous screen, your preferences are automatically saved.

Settings screen options and the order of the options may differ, depending on your region, maps installed

or model of Mio.

While changing the settings, the check box next to the option indicates the setting status:

Audio

Complete the following:

: on/enabled : off/disabled

increase/decrease the volume,

mute/unmute,

hear which letter you have tapped when you tap the touch screen,

Screen

Complete the following:

change the displayed screen mode, tap

tap

/ .

You can simply tap on the Volume bar so that the volume will

be set immediately at the position you tapped. The Volume bar indicates the current volume level.

tap .

The speaker icon indicates the status:

: muted : unmuted

tap



modes.

 

to turn it on or off.

and select:

set to automatically change between Day and Night

set the screen to be displayed in Day mode.

set the screen to be displayed in Night mode.

If you want to …

Then …

Warning:

If you want to …

Then …

Driver fatigue alert

Speed limit display

Speed limit alerts

Off:

Auto:

Speed limit + 5 km/h (+ 3 mph):

Speed limit + 10 km/h (+ 7 mph):

Set manual speed alert

Warn me not to operate my Mio while driving

Safety Camera / Mobile Safety Camera / Average Safety

Camera / Red Light Camera / Dangerous Zone

change the screen brightness in day/night mode,

Safety

Complete the following:

Enable/disable the warning message after long-distance driving,

enable/disable speed limit alerts, which warn you of the speed limit on any given road,

set the speed limit alerts manually, tap

enable/disable a visual warning if the screen is accessed in a moving vehicle,

set how you want to receive the camera and safety alerts,

tap / on the Day brightness/Night brightness bar.

The brightness bar indicates the brightness level.

high, therefore, use lower brightness whenever acceptable.

brightness will be set immediately at the position you tapped.

tap

 tap  tap

tap or off.

tap

 No alerts  Visual alert  Visual & Audible alerts

Your Mio can heat up when the brightness scale is set

You can simply tap on the brightness bar so that the screen

to turn it on or off.

and select:

disable the speed limit alert.

set the system to alert automatically while your

speed is above the limit.

while your speed is 5 km/h (3 mph) or more above the limit.

while your speed is 10 km/h (7 mph) or more above the limit.

to select the speed limit or turn it off.

set the system to alert

to turn it on

to select:

If you want to …

Then …

Mode

Car, Truck, Professional Truck

Pedestrian

Route type

Fastest:

Economical:

Easiest:

Shortest:

Choose on map

Types of road

Advanced routing

Use historic traffic speed data

Use learned driver behaviour:

Driving speed records

Custom Avoidance

Add Avoid Road

Add Avoid Area

Enabled/Disabled, Rename

Delete.

Custom POI alerts

Route options

Complete the following:

change the navigating mode, tap

set route type options for your route,

set types of road options for your route,

set the routing preference, tap

set the avoidance manually, tap

display the installed custom POI, tap

tap

 

to select

to select your route type preference from the list:

The route that should be the fastest when navigating.

The route with least number of stops, turns and

urban areas which should save on fuel usage.



The simplest route with the least number of turns and

favours motorways where appropriate.



The route with the shortest physical length.

If you do not select the preferred route type,

is set as default for this option. All of the four route types will be calculated after your search. Then, you have to select one route type on the map to start navigating.

tap

 The Types of road screen will display.  Select your road preference from the list.

Avoiding ferry routes may prevent you from navigating between certain countries, even when a bridge or tunnel exists.

to turn the Smart Routes / LearnMe Pro

functions on or off.



: enable/disable the Smart

Routes function.



enable/disable the LearnMe

Pro function.



: display the information of your driving

speed in Motorway / Highway / Major road / Minor road.

 Tap

and then follow the on screen

instructions to select the avoid road from the map view screen.

 Tap

and then follow the on screen

instructions to select the avoid area from the map view screen.

Once the avoidance has been set, it will not be added to your

route while you are planning the trip.

To edit the assigned avoidance, tap the item from the Custom

Avoidance screen and then select

, or

If you want to …

Then …

Landmark guidance

Mileage recorder Capture Journey

If you want to …

Then …

Auto-zoom map when navigating

depending on your speed, to allow optimal viewing of your route.

Show no-entry road signs

to the number of no entry roads in some major cities.

Map

Map scheme

If you want to …

Then …

Map version

Map set

Expiring maps

If you want to …

Then …

Language

display landmarks on your route, tap

record mileage for your route to generate expense reports,

record your journey, tap

Map display

Complete the following:

enable/disable automatic zooming during navigation,

display “no entry” icons on “no entry” roads on the Map screen,

set your Map screen preference, tap

change the map colour scheme, tap

My Maps

Complete the following:

view the map information, tap

select a set of maps to load, tap

check the expiring maps, tap

to turn it on or off.

tap

If selected, the Map screen will automatically zoom in or out,

tap

When turned on, the map display performance can slow down due

to select between a 3D or 2D view of the Map screen.

following information:

 Name  Date  Version/Build number  Coverage area

, then select your preference from the list.

to turn it on or off.

, then select a colour scheme from the list.

to display a list of all maps, providing the

to display a list of maps that are to expire soon.

Language

The available settings of the Language option can be customised by adding/deleting the voice file through MioMore Desktop when your Mio is connected to the computer. For more information, refer to the My Mio section in “What is MioMore Desktop?”

Complete the following:

change the on-screen language, tap

and select your preferred language from the list.

If you want to …

Then …

Voice

If you want to …

Then …

Distance units Time format

Date format

If you want to …

Then …

Auto time zone

Manual time zone

If you want to …

Then …

Delete saved information

Delete My Places

Yes

Delete recent locations

Yes

Delete planned trips

Yes

change the voice scheme, tap

and select your preferred voice scheme from the list.

Units

Complete the following:

change the distance units, tap

change the time format, tap

change the date format, tap

type.

Time Zone

Complete the following:

set the time zone automatically, select

change the time zone manually,

select

Trip Meter

The Trip Meter option displays the information of your trips.

: display the current trip

: display all trips

and then select your preferred distance unit

and then select your preferred time format.

and then select your preferred date format type.

, then adjust the setting by tapping /

Device

Complete the following:

delete the saved information on your Mio,

tap  Tap

box displays. The data saved in My Places will be deleted.

 Tap

dialog box displays. The data of recent locations will be deleted.

 Tap

dialog box displays. The planned trips saved on your Mio will be deleted.

and tap

when the warning dialog

and tap

when the warning

If you want to …

Then …

Restore factory defaults

Yes

Restore factory defaults

Reset GPS

Yes

GPS logging

If you want to …

Then …

Start

If you want to …

Then …

View Tutorial

Show tutorial

on start-up

About

restore factory default settings, tap

When the warning dialog box displays, tap restart.

default factory settings but will not delete recent locations or saved My Places destinations.

will be cleared form the device.

reset the GPS, tap

When the warning dialog box displays, tap

occur if the receiver has been transported a long distance since last being used; for example, to a different country, and is still trying to establish the previous position.

record a GPS log of your trip, tap

The

When you restore factory defaults, your LearnMe Pro profile

Occasionally, the GPS fix may need to be reset. This may

to turn it on or off.

option allows you to restore

Demo

Demo will begin when the device is connected to power via genuine Mio AC Chargers.

Complete the following:

enable a shop demonstration of Mio Spirit to be played,

select a demonstration country from the list and tap

Tap OK. Your Mio will restart.

When your Mio is in Shop demo mode, you will see the navigation demonstration of the pre-defined route without having to set a destination.

. Your Mio will

Help

Complete the following:

view the tutorial, tap

view copyright and trademark information,

You cannot operate your Mio properly in Shop demo mode.

To display the tutorial on each start-up, select the

tap

option on the initial screen of tutorial.

CAUTION:

install.exe

Install Software

Install MioMore Desktop

Finish

What is MioMore Desktop?

MioMore Desktop is a suite of tools you can use to access greater functionality and product information via your computer.

MioMore Desktop allows you to:

 obtain software updates  manage maps  search online for local POIs  manage custom POIs  plan trips  manage safety camera subscriptions  browse the Mio website for special offers

Can I use MioMore Desktop with my computer?

Ensure your computer has the following minimum system requirements before installing MioMore Desktop:

 IBM compatible PC  Microsoft Windows Vista, Windows 7 or Windows 8  Internet Explorer 6 or later versions  USB port  Internet connection for activation

Microsoft .NET 2.0, 3.0 and 3.5 will be installed on your computer as part of the installation of MioMore Desktop.

How do I install MioMore Desktop onto my computer?

mass-storage device. Do NOT delete any files that are pre-installed on your Mio. Deleting the files can cause your Mio to crash.

1. Close all programs on your computer.

2. Download the ZIP file of the MioMore Desktop Application Installer DVD for your Mio from Mio website

3. Double-click

4. Select your preferred language for MioMore Desktop.

5. Click

6. Follow the screen prompts to install MioMore Desktop:

7. If prompted to connect your Mio to your computer, complete the following:

When your Mio is turned on and connected to a computer, it is recognised as an external

(service.mio.com

 Review and accept the Licence Agreement for MioMore Desktop when prompted.  Select a destination folder for MioMore Desktop when prompted.  When the installation is complete, click

 Plug the large end of the USB cable (supplied) directly into a USB port on your computer (not a USB

hub) and plug the small end into the USB Socket ( ) on the bottom of your Mio.

), and unzip the file.

to run the MioMore Desktop Installer.

, then

. MioMore Desktop will open.

Computer

Start

All Programs

Mio

MioMore Desktop

Purchase an activation key from the Mio store

Where possible, plug the USB cable into a USB port at the back of your computer.

 Turn on your Mio, and then select the

option from the pop-up message screen.

If prompted to update your Mio software, follow the on-screen prompts.

8. You are now ready to use MioMore Desktop for your Mio.

From now on, you can access MioMore Desktop via:



Loading the data ISO file as a DVD

After you unzip the ZIP file of the MioMore Desktop Application Installer DVD, you will find an ISO file. The ISO file is essential for installing or recovering software, voice files and subscriptions on your Mio. To use the ISO file, search online and install a free virtual drive program to load the file as a DVD.

My Subscriptions

MioMore Desktop  My Subscriptions

Subscription information is not available on all models and is only available in selected countries.

Your Mio contains pre-loaded subscriptions, such as safety camera and travel book information. For the latest subscription updates, visit: www.mio.com

Safety Camera alerts can be set to enable a warning sound or visual warning when on your route.

How do I purchase a subscription?

1. Select a type of subscription. A list of regions will display.

2. Select a region. A list of available subscriptions will display.

3. Select a subscription or offer, then click

. The Mio Store

website will open.

4. Follow the prompts to purchase your subscription.

Icon

Description

Recover Subscriptions

My Maps

A product key will be sent to you via email when you have subscribed. You will need to use this product key to activate your subscription.

How do I activate my subscription?

MioMore Desktop  Unlock Features

1. Enter your product key.

2. Follow the prompts to activate your subscription.

How do I update subscriptions on my Mio?

The My Subscriptions section will display a list of subscriptions already installed on your Mio:

Red Expired subscriptions.

 Right click to purchase a new subscription.

Yellow Available subscriptions.

 Right click to update and purchase new subscription.

Green Active subscriptions.

No updates are available for these subscriptions.

How do I recover my subscription?

If your subscriptions are deleted and you want to recover them, click

at the

bottom-right corner in My Subscriptions to recover all subscriptions.

My Maps

folder (e.g. C:\username\Documents\Maps) and then displayed in My Maps. The default map folder may vary depending on your Operating System. You can change the setting of MioMore Desktop to locate the map folder where you save the map by clicking MY MIO  Options  My Maps  Change.

allows you to install new maps, remove maps from your Mio and purchase new maps.

The downloaded/purchased map (*.iso) from Mio Store website will be saved on your computer’s map

Component

Description

Loadable Maps

Open

Install Maps

Upwards

My Mio

Remove maps

View

Download

Change Path

MioMore Desktop  My Maps

❶ ❷

❸

❶

A list of maps from the downloaded data ISO file or available for purchase via the Mio Store website.

 Select a map source and then click  From the map Source section, click

your Mio. Otherwise, click

❷

❸

A list of maps installed on your Mio.

Click to remove the selected map from your Mio.

to display the Map Source section.

to install the selected map to

to return to the Loadable Maps section.

How do I download a map update?

Occasionally Mio may offer you free updates, including software applications, maps, and more. If a free map update is available and your Mio is connected to your computer, a message will display when you first start MioMore Desktop.

1. From the pop-up message window, click

to display the Device Updates screen that contains the

available updates.

2. Select the desired map update and click

Before downloading, you can change the download folder by clicking

. MioMore Desktop will start to download immediately.

3. During the download operation, you can:

 View the download status from the downloading bar.  Stop the download by clicking .  Pause the download by clicking , and then resume download at a later time by clicking .

4. When finished, the downloaded map update will be displayed in My Maps.

My Maps

Open

If the map to be installed is …

Then …

If you want to …

Then …

How do I install maps onto my Mio?

Your Mio comes with one or more pre-activated maps. Map files take up space on your Mio’s internal memory. If you do not use a map file, you can remove it to free up space. You can later reinstall it to your Mio if required.

You can install maps from the following:

 The downloaded data ISO file,  The downloaded map update,  The map that you have purchased separately to a memory card (for the models with the MicroSD slot) or

your Mio internal memory.

You may need to purchase a Map Product Key to activate maps from the downloaded data ISO file.

1. Open MioMore Desktop, and then click

2. Select a map source (such as the downloaded data ISO file that has been loaded as a DVD) and then click

to display the Map Source section.

 The maps already installed on your Mio are green.  The maps that are unlocked and ready to be installed to your Mio are yellow.  The maps that require activation before being installed to your Mio are red.  The maps that are available for purchase from Mio are blue.

If your computer opens Windows Explorer when the downloaded data ISO file has been loaded, close

the Windows Explorer window.

3. Complete the following:

yellow go to step 6.

red

the map needs to be activated via the Internet before it can be installed; continue to step 4.

4. If you connect to the Internet via a dial-up connection, connect to the Internet now.

5. Follow the prompts to activate your Map Product Key, including:

 Enter the Map Product Key when prompted.  Your computer will connect to the Internet and activate your Map Product Key.  When activation has completed, the map will change colour to yellow; continue to step 6.

6. Click the map you want to install to your Mio. The map will change colour to a brighter yellow to indicate

it has been selected. To deselect a map, click the map again.

You may need to install multiple maps to cover the required geographical area.

7. Complete the following:

install a yellow map, go back to step 6.

install a red map,

the map needs to be activated via the Internet before it can be installed; go back to step 4.

install the selected maps to your Mio, continue to step 8.

Install Maps

WARNING:

My Maps

Remove Maps

Custom POIs

File

Save As

8. Select the destination media (Mio internal memory) for the selected maps, then click

The selected maps will be installed and change colour to green.

9. To use your Mio, disconnect the USB cable. You may need to manually reset your Mio.

maps have changed colour to green.

Do not disconnect the USB cable from the Mio USB Socket until the installed map or

How do I remove maps from my Mio?

1. Open MioMore Desktop, and then click

2. From the My Mio panel, select the check box next to the map you want to remove.

3. Click

to remove the selected maps.

4. Confirm that you want to remove the selected map when prompted. The map is removed from your Mio.

You can reinstall these maps at any time via MioMore Desktop.

Custom POIs

Depending on your Mio model, some Custom POIs features may not be available.

MioMore Desktop  Custom POIs

The

(Points of Interest) application allows you to create or import your own POI files. These are called custom POIs. Unlike preinstalled POIs, custom POIs can be removed from your Mio and can have audio as well as visual alerts associated with them.

To create your POI files, open Microsoft Excel and then enter the POI location details (including Longitude,

Latitude, Name, and Description) in separate cells. Always use decimal degrees for coordinates and start a new location from a new line. When done, click



to save it as a *.csv file. Now you have successfully

created a POI CSV file. The following displays the example of creating the POI file by using Microsoft Excel:

Add new POIs

Browse

Open

POI Category

If you want to …

Then …

Existing category

Replace existing POIs

Add to existing POIs

New category

If you want to …

Then …

Visual alert

Browse

Open

Distance

Use metric units

Audio alert

Various POI files are available for download free or by subscription from third-party websites. Ensure that downloaded files are in .csv (Comma Separated Values) format. Mio is not responsible for the content or accuracy of the information or the reliability or availability of these websites. The use of information regarding safety camera locations may be subject to local laws in the country of use. You are responsible for checking that you can use the information in your country or in the country where the information will be used.

How do I install custom Points of Interest?

1. In the

2. Select the file from your local or network drive, then click

3. From the

section, click

section:

to select a source file. The Open dialog box will open.

use an existing custom POI category, select the

Replace an existing POI,

create a new custom POI category, select the

4. Set Alert setting as required:

enable a visual warning when a POI of this category is in close proximity,

select an icon to display on the Map screen for POIs of this category,

select the distance from a POI of this category at which the visual warning should display or the warning chime should sound,

enable a warning sound when a POI of this category is in close proximity,

from the drop down list.

select the drop-down list, then select

option and a type from the

If you want to create a new POI instead, then select

option, then type a name for the

POI category.

option, then select a type

select the

click

check box.

to select the icon file from your local or

network drive.  When you have located the icon file, select it and

click

 The icon file must be a bitmap (*.bmp or *.png)

graphic with a minimum size of 6x6 pixels and a maximum size of 32x32 pixels.

If you do not select a custom icon, a default icon will

display.

select the distance from the

box.

To change the units used to measure distance for

this POI category, from the tools menu click on options and from the general option select check box.

select the

check box.

If you want to …

Then …

Add

Open

Add to device

Installed POIs

Delete

❶ ❸ ❻ ❷ ❹

❺

select a custom sound alert file to play when a POI of this category is in close proximity,

either select a sound file from the list, or click select a sound file (.WAV format) from your local or network drive. When you have located the file, select it and click

If you do not select a custom sound file, a default sound alert will play.

5. Click

to add the POI to your Mio.

Each file corresponds to a POI category; for example, Hotels.csv will be listed on your Mio as the Hotels

category.

How do I delete a custom POI file/category from my Mio?

1. In the

section, click

next to the file name. The file is removed from the list, but is not

yet deleted.

2. Accept the warning message. The selected file/category is deleted.

Photo Album

Depending on your Mio model, certain Photo Album features may not be available.

MioMore Desktop  Photo Album

Photo Album is a MioMore Desktop application which allows you to copy, delete or move pictures or albums between the NavPix™ library on your Mio and the NavPix™ library on your computer.

Component

Description

Desktop albums

Album display area

View all NavPix

My Mio albums

Album display area

Selected picture

Album display area

Toolbar

Button

Description

Create new album

Add to My Places

Transfer to your Mio

Transfer to your computer

Transfer to your Mio

Transfer to your computer Import Export to disk

View details

Rotate left

Rotate right

Delete

❶

❷

❸

❹

❺

❻

Toolbar

Displays a list of all albums stored in the NavPix™ library on your computer.

 Click an album to display its contents in the  Click

to display all pictures stored in the NavPix™

library on your computer.

Displays a list of albums stored on the Mio internal memory and on the memory card if one is inserted.

 Click an album to display its contents in the

When a thumbnail is selected it displays with a blue border.

Displays thumbnails of pictures in the selected album.

Type to search for a NavPix™ by name.

When a picture is selected, the icons which can be used will be active.

❶

❷ ❸

❹

❺

❻

❼ ❽

❾

Click to create a new album in the NavPix™ library you are viewing.

Click to transfer NavPix™ to My Places.  If you are viewing NavPix™ in the NavPix™ library on your

computer, this will display as Click to transfer the selected NavPix™ to your Mio.

 If you are viewing NavPix™ in the Mio library this will display as

. Click to transfer the selected photo(s) to the NavPix™ library on your computer.

NavPix™

Imports NavPix™ from your computer to the NavPix™ library on your computer.

Click to save NavPix™ to your computer or a network drive.

Click to view the selected NavPix™ and edit NavPix™ details, including:

 NavPix™ name  latitude  longitude  description

Rotates the selected NavPix™ 90° to the left.

Rotates the selected NavPix™ 90° to the right.

NavPix™ Click to delete the selected NavPix™.

Toolbar

Import NavPix

Open

Album display area

Mio albums

Transfer

to your Mio

If you want to …

Then …

Rotate left

Rotate Right

View Details,

View Details

Delete

How do I transfer pictures from Photo Album to my Mio?

You can transfer pictures from your computer to your Mio. You can import any JPEG (.jpg) into Photo Album, add or edit GPS information, and then copy the picture to your Mio.

1. From the

2. Select a NavPix™ from a folder on your computer and click

display in the

MioMore Desktop.

3. Either click and drag the required NavPix™ to an album in the

was taken.

How can I view and edit pictures or albums on my computer?

rotate a picture to left, select the picture from the Album display area.

rotate a picture to right, select the picture from the Album display area.

view the picture details, select the picture from the Album display area.

edit GPS information, select the picture from the Album display area.

delete a picture, select the picture from the Album display area.

section, select

. The Open dialog box will display.

. Thumbnails of the NavPix™ will

You can also drag and drop a NavPix™ from a folder on your computer to an Album on your

section, or click the

icon on the toolbar.

If you have transferred a NavPix™ with GPS coordinates you can then navigate to where the picture

Click

Right-click and select

on the toolbar.

or click

on the

toolbar.

Double click on the picture or click

on the toolbar.

The following information will display:

o Name o Latitude and Longitude o Description

Edit the details you want to modify.

Click

Right click and select

to save the changes.

or click

on the toolbar.

If you want to …

Then …

Desktop albums Desktop albums

Remove from album

Delete

Desktop albums

Add to My Places

View Details

Desktop albums

Upload to Flickr

Export to disk

Desktop albums

Export to Google

Earth

Search for NavPix

near this

View all NavPix

Desktop

What else can I do with pictures and albums on my computer?

add a picture to another album,

in the

NavPix™

you want to include in another album.

section, select the album containing the

Select the NavPix™ then drag it to the other album.

The selected NavPix™ is included in the new album, but is not moved, i.e., one instance of the NavPix™ included in multiple albums.

remove a picture from an album,

in the

NavPix™

you want to remove.

section, select the album containing the

Select the NavPix™, right click and select

Click the

icon on the toolbar if you want to delete the

NavPix™ from all albums.

add a NavPix™ to My Places,

in the

section, select the album containing the

NavPix™ you want to add to My Places. Select the NavPix™, right click and select

view and edit picture details, select the picture then click the

Edit the fields as required.

upload picture to the Flickr website,

in the

section, select the album containing the

NavPix™ you want to upload to the Flickr website. Select the NavPix™, right click and select

You need a Flickr account to upload NavPix™. To create a Flickr account visit www.flickr.com

save a picture to your computer, select the picture from the Album display area.

Right click and select

or click

toolbar. Navigate to a folder on your computer where you want to save the

NavPix™.

export to Google Earth™ (only NavPix™

with GPS coordinates can be exported to Google Earth),

in the

section, select the album containing the

picture you want to export to Google Earth. Select the NavPix™, right click and select

Navigate to a folder on your computer to save the file and then open it in Google Earth.

in the library may be

icon on the toolbar.

on the

search for other NavPix™,

view all pictures in the library, click

You need to install the Google Earth software on your

computer to be able to view the file you have created. You can download Google Earth from earth.google.com

right-click on the desired NavPix™ and select

at the bottom of the

album section.

If you want to …

Then …

Change

Save

Warn me when permanently deleting a NavPix from my

Mio

Warn me when permanently deleting a NavPix from my

library

Import photos to a new album Show NavPix on map

Description

Sort by

Photo Album preferences

MioMore Desktop  MY M IO  Options  Photo Album

Complete the following:

change your NavPix™ location on your computer,

click Select a location for your NavPix™ library. Click

prompted to confirm your action. Your NavPix™ library is moved to the new location.

receive a warning message before deleting an image from your device,

receive a warning message before

select

check box.

select

deleting an image from your NavPix™ library,

create a new folder every time you

select the

import new photos,

view NavPix™ when on a route, select the

Image Search

MioMore Desktop  Image Search

or OK. The warning message will display and you will be

check box.

checkbox.

Image Search is a MioMore Desktop application powered by Flickr™ allowing you to download photos and import them to Photo Album. You can then upload the photo to the Flickr website, transfer photos to your Mio, export pictures to Google Earth or search for other NavPix™ near the longitude and latitude of your NavPix™.

How do I download NavPix™ from the internet?

1. In the

2. Select one of the

field enter a search description for the image you are looking for.

options.

Advanced search

Add to My Places

Device Main Menu screen

Save to Device

Reset to Default Settings

Device Main Menu screen

Available Settings

Save to Device

3. Click

. Thumbnails of the NavPix™ will be displayed in the NavPix™ display area.

You can narrow your search by selecting the

the drop down list or by entering latitude and longitude details.

check box and then selecting a city from

How do I import NavPix™ to My Places?

1. Select a picture or group of pictures you want to add to your My Places.

2. Click

. The selected image is added to My Places.

Application Gallery

MioMore Desktop  Application Gallery

Application Gallery is a MioMore Desktop application that allows you to add, remove and rearrange applications on the Main Menu screen of your Mio.

Application Gallery screen items and the order of the options may differ from the above, depending on

your region, maps installed or model of Mio.

How do I rearrange Main Menu applications on my Mio Main Menu?

1. Select any application from the

section.

2. Drag the application to the position that you would like it to appear on your Mio.

3. Click

Click

. The order of the Main Menu screen is saved on your Mio.

to restore the Main Menu screen to the factory default order.

How do I remove an application from my Mio?

The following applications cannot be removed from your Mio:

1. Select any application from the

2. Drag and drop the application to the

3. Click

. The application is removed from the Main Menu screen on your Mio and is no longer

section.

accessible.

Available Settings

Device Main Menu screen

Save to Device

How do I add an application to my Mio?

1. Select any application from the

2. Drag and drop the application to the

3. Click

. The application is added to the Main Menu screen on your Mio.

Unlock Features

MioMore Desktop  Unlock Features

section.

If you have purchased a map unlock code or subscriptions for your Mio, you have to enter the activation key using the Unlock Features application.

Make sure you have an active Internet connection for this feature.

The activation key will be sent to you by email, or printed on the inside cover of the box if you purchase

the map update DVD. You can click the link on the screen to purchase an activation key online.

Redeem

MioMore Desktop  Redeem

To redeem Mio’s lifetime map update service, you need to enter the product key using the Redeem application. Please note that the product key can only be used once and is not transferable.

Make sure you have an active Internet connection for this feature.

The product key is printed on the flyer that is enclosed in the package.

MY PLACES

MioMore Desktop  MY PLACES

If you want to …

Then …

Type

Name

If you want to …

Then …

Import

Open

Export

Save

File

Import

Export

My Places

If you want to …

Then …

Edit notes

My Places includes saved addresses, captured journeys and sound, Points of Interest, NavPix™, and other locations. You can select, modify and delete places. You can also add locations from Connect and Image Search to My Places.

Make sure you have an active Internet connection for this feature.

You can install a maximum of 99 locations on your Mio via My Places.

How do I sort My Place locations?

You can sort My Place locations by type and name:

sort My Place locations by type, click

sort My Place locations by name, click

on the My Places panel.

How do I import or export a location?

Complete the following:

import a location from the computer to your Mio,

from the My Places panel, click

The Open dialog box will open. Locate the file you want to import and then click

The supported file format for importing includes: *.KML and *.KMZ.

export a location from your Mio to the computer,

You can import/export a location by clicking

from the My Places panel, select a location and then click The Save as dialog box will open. Enter a descriptive name for the file and

then click

The supported file format for exporting includes: *.KMZ.



(or

) 

MioMore Desktop Menu.

How do I edit a location from the map screen?

1. From the My Places panel select the location you want to edit.

2. Click the location icon on the map. The location summary pop-up will display.

3. Complete the following:

edit the location name,

click the location name. Enter a new name or edit the existing name. The location name is

changed in both MioMore Desktop and your Mio.

edit the location notes,

click

Enter notes. The location notes is changed in both MioMore Desktop and your Mio.

from the top of

If you want to …

Then …

Yes

Save

TRIP PLANNER

share the location,

delete the location,

export the location,

TRIP PLANNER

MioMore Desktop  TRIP PLANNER

click . An email will open ready to send to your friends. Your friend will

receive the email with links to either save the image or to save the location in My Places in MioMore Desktop.

If the location is a NavPix™, your friend will receive the

image as an attachment to the email.

If the location is a captured journey, your friend will receive the

journey as a *.KMZ file attached to the email. Your friend will need to have Google Earth installed on the computer to view the KMZ file.

If the location is a captured voice recording, your friend will

receive the voice recording as a *.wav file attached to the email.

click , then click

to delete the location.

You can delete all locations in My Places by clicking on

the My Places panel.

click . The Save as dialog box will open. Enter a descriptive name for the file

and then click

❶

In addition to your trip on the computer.

( ) on your Mio,

❷

in MioMore Desktop allows you to pre-plan

Component

Description

Route planner

From

Display area

From

Keyword

Address

Postcode

If you want to …

Then …

Add Waypoint

Route options

Mode:

Driving, Walking

Truck

Type of route:

Fastest, Shortest, Easiest

Economical

Avoidance:

Unsurfaced roads, Toll roads, Ferry

routes

Special zone

Route options

Waypoint Optimization

Plan Route

Save this route

From

❶

Plan a route by entering

point and To point. A list of planned routes

will display in the Pre-planned Routes section.

❷

Display the route on the map.

You can also plan your route directly on the map.

How do I pre-plan a route by search?

1. From the Route planner panel, set your

point and To point.

You can find a location by:

Input your content and click to start a search. You may need to select from a category list to narrow your search results.

2. Complete the following:

add a waypoint, click

reset or remove a waypoint,

click next to the waypoint.

set the route preferences, click



selected models)

Select the

and select:

, or

mode to plan your route.

(for

way to plan your route.



, or

Avoid

in your route.

, or

The

settings will only apply to the route

you are editing.

arrange the destinations in the most

click

. efficient order while two or more waypoints are included in the planned trip,

3. Click

4. Click

How do I pre-plan a route using the map?

1. From the map displayed in the Display area, click .

2. The cursor will be marked with “Add route”. Move the cursor and then click on the map to set the

3. The cursor will be marked with “Click to set destination”. You can:

point.

to calculate your route. The route will be displayed on the map.

. The route is saved to the Pre-planned Routes section and your Mio simultaneously.

Save this route

If you want to …

Then …

Name

Language

My Voices

If you want to …

Then …

Install selected voices

Remove selected voices

 Move the cursor and then click on the map to set the waypoint.

 Move the cursor and then double-click on the map to set the

4. When done, click

simultaneously.

How do I edit a route?

1. From the Pre-planned Routes section select a route to edit.

2. Complete the following:

. The route is saved to the Pre-planned Routes section and your Mio

point.

rename the route,

click the title of the route in the

column, then enter a new name and

press ENTER. Your changes are automatically saved.

delete a saved route,

click next to the route you want to remove.

MY MIO

MioMore Desktop  MY MIO

How do I change the displayed language for MioMore Desktop?

You can change the language for MioMore Desktop.

1. Click

2. Select your preferred language.

How do I install or remove a voice file for my Mio?

My Voices is a MioMore Desktop application that allows you to install or remove voice files on your Mio. To use this feature, make sure that the downloaded data ISO file has been loaded as a DVD.

1. Click

2. Complete the following:

free up space. You can later reinstall it to your Mio if required. The downloaded data ISO file of your Mio is needed while installing the voice file.

How do I report mileage?

install a voice file, in the Available voice files section, select the voice file you would like to install.

Click

remove a voice file, in the Available voice files section, select the voice file you would like to remove.

Click

Voice files take up space on your Mio’s internal memory. If you do not use a voice file, you can remove it to

Mileage Reporter is not available on all models.

Mileage Reporter is a MioMore Desktop feature that allows you to create expense reports (.csv format) based on the mileage and estimated fuel usage recorded by your Mio.

Component

Description

Timeframe

Show All

Report panel

Fuel Report data buttons

Mileage recorder

Backup and Restore

If you want to …

Then …

Create new backup

❸

❹

❶

❷

❸

❶

❷

Specifies the time for which the mileage report will be created.

Select

to include all recorded mileage.

Displays your trip log data.

Select to include the amount of fuel (estimate) used for the mileage recorded. If selected, specify the number of miles travelled per gallon, or miles/kilometers travelled per litre.

❹

Import report data from your Mio, clear all report data from your Mio or export data to a report (.csv).

To use the Mileage Reporter function of MioMore Desktop, the

on your Mio. For more information, refer to the Route options section in “What can I customise?”

To change the Mileage Reporter preferences, click MioMore Desktop  MY MIO  Options  Mileage

Reporter.

How do I backup and restore my Mio?

You can save backups of data from your Mio, and later restore it if required.

1. Click

2. Complete the following:

backup your Mio, click

. Select the data you would like to backup. Click OK. The backup will be saved to your computer. The backup will be

listed on the Backup and Restore window.

option must be enabled

If you want to …

Then …

Restore

Delete

Smart Recovery

Maps

Voices

Recover

Device Updates

New Update

If you want to …

Then …

Download

Change Path

Recover

keys

restore a backup to your Mio,

select the backup from the list that you would like to restore.

Click

, then click OK. The backup will be restored to your Mio.

delete a backup, select the backup from the list that you would like to delete.

Click

, then click OK. The backup will be deleted.

How do I recover maps and voice files for my Mio?

The Smart Recovery application allows you to recover all data to fix your Mio if a problem occurs during operation, including software, maps, voice files, and subscriptions.

This feature only functions if you have ever updated your Mio by using the “Device Updates” feature.

1. Click

To use the Smart Recovery application to recover data, make sure you have an active Internet

connection and the downloaded data ISO file has been loaded as a DVD.

2. The available data will be displayed in the

to recover the data on your Mio.

and

fields. Select the desired data and click

How do I manually update my Mio?

Occasionally Mio may offer you free updates, including software applications, maps, voice commands, and more. You can manually check the available updates via the Device Updates function.

1. Click

You can also open the Device Updates screen by clicking the

corner of MioMore Desktop.

. The Device Upd ates screen that contains the available updates will display.

button at the top-right

2. Complete the following:

download the updates, select the available update from the list, and then lick

You can view the download status from the downloading bar.

stop/pause the download, during the download:

 Click  Click

resume downloading.

change the download folder, click

to stop the download.

to pause the download; when paused, click to

3. When completed, the downloaded file will be saved to the assigned folder.

 For software update, the *.exe file will be launched automatically to install the update.

 For map/voice command update, the system will display the My Maps/Voice Command screen

automatically to install the update.

How do I recover keys on my Mio?

The Recover keys application allows you to fix your Mio if a problem occurs during operation. Click the

option in the menu and then follow the prompts to complete the process.

How do I configure MioMore Desktop?

Depending on your Mio model, certain setting options may not be available.

Options

If you want to …

Then …

General

Auto check for updates

General

Use metric units

Use decimal degrees

Mileage Reporter

Warn me when deleting all log files from my Mio

Distance per volume

Volume per distance

Photo Album

Change

My Maps

Change

1. Click

2. Complete the following:

, and then select the desired setting options to configure.

keep MioMore Desktop updated,

change the units of measurement that MioMore Desktop uses,

change the Mileage Reporter settings,

change the NavPix™ library location,

change the location of where downloaded updates will be saved,

click

, and then select the

checkbox.

When you select this option, every time you open MioMore Desktop, the available service packs and bug fixes will be downloaded from the Mio server and applied to your Mio.

click

, and then:

Select or clear the

checkbox to change between

imperial and metric units. Select or clear the

checkbox to change between

decimal degrees and latitude/longitude coordinates.

click

, and then:

Select or clear the checkbox.

Select

to change the

fuel economy style.

click

, and then click

For more information about configuring your Photo Album, refer

to the “Photo Album” section.

click

, and then click

Select a folder for the updates. The downloaded updates are moved to the new location.

Icon

Description

Icon

Description

For more information

Point of Interest categories

Airport

Art centre

Bank

Beach

Bowling centre

Business office

Camping ground

Casino

Church

City hall

Coffee shop

Community centre

Courthouse

Doctor

Exhibition centre

Fire Brigade

Amusement park

ATM/Cash dispenser

Bar/Pub

Breakdown service/Car repair facility

Business facility or company

Bus station

Car dealer/Automobile dealer

Cemetery

Cinema

City, town or village

College/University

Commuter railway station

Dentist

Embassy

Ferry terminal

Golf course

Government office

Guest house

Hospital/Polyclinic

Ice skating

Information/Tourist information office

Marina/Yacht basin

Monument

Grocery store

Higher education

Hotel

Important tourist attraction

Library

Medical

Motorcycle dealer

Icon

Description

Icon

Description

Icon

Description

Motoring organisation office

Museum

Natural attraction

Park and ride

Parking garage

Performance art/Theatre

Pharmacy

Police station

Public restroom/Toilet facilities

Railway crossing

Rest area

Road accident black spot

School

Shop

Ski resort/Ski lift station

Sport centre

Mountain pass

Music centre

Nightlife

Parking

Park/Recreation area

Petrol station

Place of worship

Post office

Public sport airport

Rental car agency

Restaurant

Scenic/Panoramic views

School zone

Shopping

Speed check

Sports hall

Sports complex

Tennis court

Transport ferry

Winery

Stadium

Travel agency

Veterinarian

Zoo

The POI categories and the order may differ, depending on your region, maps installed or model of Mio.

Branded Points of Interest

Branded Points of Interest are available on some maps. These include well known restaurants, accommodation providers, tourist attractions, Petrol stations, etc. The icon will usually display the company logo.

Point of Interest categories by subscription

Safety Cameras

Safety Camera (Mobile)

Icon

Description

Icon

Description

Safety Camera (Average)

My Places categories

Home

Saved locations

Captured journey (for selected models)

Red Light Camera

Online support

For 24/7 help and support with Mio products, visit our Technical Support website at: service.mio.com

Registration

Visit Mio website (www.mio.com) to register your device to keep updated on Mio products and the latest offers.

Speed limit

Mio products are designed to be used as an aid to safer driving. Mio does not condone speeding or any other failure to comply with your local traffic laws. It is your responsibility to drive within the posted speed limit at all times and to drive in a careful manner. Mio accepts NO liability whatsoever for you receiving any speeding fines or points on your license through using this device. Mio does not guarantee the accuracy of the data contained within this database either expressed or implied. In the event you receive a fine or any other penalty for speeding or contravention of any traffic law, or are involved in an accident, Mio is not responsible for any damages of any type. In some countries the data information regarding speed limits may conflict with local law and/or regulations. It is your responsibility to make sure that your use of the data is in compliance with local laws and/or regulations. Usage is at your own risk.

Safety camera POIs

Mio products are designed to be used as an aid to safer driving. You can receive messages to alert you to locations of safety cameras, which will enable you to monitor your speed through these areas. Mio does not warrant that all types and locations of safety camera data are available, as cameras may be removed, relocated or new cameras installed. Mio does not condone speeding or any other failure to comply with your local traffic laws. It is your responsibility to drive within the posted speed limit at all times and to drive in a careful manner. Mio accepts NO liability whatsoever for you receiving any speeding fines or points on your license through using this device. Mio does not guarantee the accuracy of the data contained within this database either expressed or implied. In the event you receive a fine or any other penalty for speeding or contravention of any traffic law, or are involved in an accident, Mio is not responsible for any damages of any type. In some countries the data information regarding safety or speed cameras may conflict with local law and/or regulations. It is your responsibility to make sure that your use of the data is in compliance with local laws and/or regulations. Usage is at your own risk.

Copyright

© MiTAC Digital Technology Corporation. Mio is either a registered trademark or trademark of MiTAC Digital Technology Corporation and is used under licence by Mio Technology Limited. All rights reserved.

The software contains proprietary information of MiTAC Digital Technology Corporation; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Mio.

All other trademarks and registrations are the property of their respective owners. Revision: R00

(4/2018)

Mio 7700 LM User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Hardware User Manual

Important safety information

Home charger-specific safety information

Internal battery-specific safety information

Compliance

WEEE

Contents

Welcome

Important information for using the manual

Disclaimer

Mounting your Mio in a vehicle

Getting to know your Mio

How do I turn on my Mio?

Using the power button

Resetting the device

How do I charge the battery?

How do I charge the battery in a vehicle?

How do I charge the battery at home or work?

How do I connect the device to my computer?

Reference

What is GPS?

How does my Mio receive GPS signals?

Caring for your Mio

Troubleshooting

Software User Manual

Contents

Welcome

Important information for using the manual

Disclaimer

How do I get started?

How do I use the touch screen?

Navigating on the screen

Main Menu

How do I navigate through the menu screens?

How do I use the Keyboard screen?

How do I go from A-B?

How do I use the FIND wizard?

How do I plan my first trip?

How do I preview the destination on map?

How do I preview a route?

Truck mode

Pedestrian mode

How do I view my route?

How do I select the route type?

The driving map

How do I change the route configuration?

How do I view my route statistics?

How do I adjust the volume?

How do I zoom in/out the map?

Advanced routing functions

How do I create a trip with multiple stops?

How do I capture a location or a journey?

How do I capture the GPS coordinates of my location?

How do I capture a journey?

How do I navigate to a location I have captured?

How do I navigate to the saved car location?

How to view a journey I have captured?

My Places

How do I save a location as My Place or Home?

How do I navigate to a location I have saved?

How do I navigate to Home?

How do I navigate to a recent place?

How do I edit a saved location in My Places?

How do I navigate to a NavPix™?

How do I search for a POI?

How do I find the nearest POIs using Near Me?

How do I find the POIs using EXPLORE?

How do I search for a POI by type?

How do I search for a POI by keyword?

What can I customise?

Audio

Screen

Safety

Route options

Language

Map display

Hardware

User Manual

Software

User Manual