MINOLTA BIZHUB 600 User Manual

ser

s Guide

[Network Scanner Operations]

Introduction

Thank you for choosing this machine.

This user’s guide contains details on the operation of the network connection and scanner functions of the bizhub 750/600, precautions on its use, and basic troubleshooting procedures. In order to ensure that this machine is used correctly and efficiently, carefully read this user’s guide before using the machine. After reading the manual, store it in the designated holder so that it can easily be referred to when questions or problems arise during operation.

The illustrations used in this manual may appear slightly different from views of the actual equipment.

bizhub 750/600 x-1

Trademarks and Registered Trademarks

KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC.

PageScope and bizhub are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.

Netscape Communications, the Netscape Communications logo, Netscape Navigator, Netscape Communicator, and Netscape are trademarks of Netscape Communications Corporation.

This machine and PageScope Box Operator are based in part on the work of the Independent JPEG Group.

RC4® is a registered trademark or trademark of RSA Security Inc. in the United States and/or other countries.

Introduction

RSA® is a registered trademark or trademark of RSA Security Inc. RSA BSAFE United States and/or other countries.

OpenSSL Statement

is a registered trademark or trademark of RSA Security Inc. in the

License information

This product includes RSA BSAFE Cryptographic software from RSA Security Inc.

OpenSSL License

Copyright © 1998-2000 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”

x-2 bizhub 750/600

Introduction

4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used

5. Products derived from this software may not be called “OpenSSL” nor

6. Redistributions of any form whatsoever must retain the following ac-

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

to endorse or promote products derived from this software without prior written permission. For written permission, please contact opensslcore@openssl.org.

may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.

knowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”

This product includes cryptographic software written by Eric Young (eay@crypt-Soft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).

Original SSLeay License

Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

bizhub 750/600 x-3

Introduction

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young (eay@crypt-soft.com)” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related.

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This product includes software written by Tin Hudson (tjh@cryptsoft.com)”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

All other product names mentioned are trademarks or registered trademarks of their respective companies

NetSNMP License

Part 1: CMU/UCD copyright notice: (BSD like)

x-4 bizhub 750/600

Introduction

Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU and The Regents of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission.

CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Part 2: Networks Associates Technology, Inc copyright notice (BSD)

Copyright © 2001-2003, Networks Associates Technology, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. * Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Part 3: Cambridge Broadband Ltd. copyright notice (BSD)

bizhub 750/600 x-5

Introduction

Portions of this code are copyright © 2001-2003, Cambridge Broadband Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Part 4: Sun Microsystems, Inc. copyright notice (BSD)

Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-

x-6 bizhub 750/600

Introduction

CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Part 5: Sparta, Inc copyright notice (BSD)

Copyright © 2003-2004, Sparta, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. * Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

Part 6: Cisco/BUPTNIC copyright notice (BSD)

Copyright © 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

bizhub 750/600 x-7

Introduction

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. * Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission.

x-8 bizhub 750/600

Introduction

Contents

Introduction

Trademarks and Registered Trademarks ...................................... x-2

Contents ............................................................................................ x-9

About This Manual .......................................................................... x-18

Structure of the Manual ................................................................x-18

Notation .........................................................................................x-18

Explanation of Manual Conventions ............................................. x-19

User’s Guides .................................................................................. x-20

User’s Guide [Copy Operations] ...................................................x-20

User’s Guide [Network Scanner Operations] <this manual> ........x-20

User’s Guide [Box Operations] .....................................................x-20

User’s Guide [Enlarge Display Operations] ...................................x-20

User’s Guide [FK-502 Facsimile Operations] ................................x-20

User’s Guide [Network Fax Operations] .......................................x-20

IC-202 User’s Guide/Quick Guide ................................................x-21

1 Before Using the Scan Functions

1.1 Environment Required for Using the Scan Functions ................... 1-2

1.2 Available Scanning Functions ......................................................... 1-3

Sending the Scanned Data in an E-Mail Message ......................... 1-3

Sending the Scanned Data as Files (FTP) ...................................... 1-4

Sending the Scanned Data to a Computer on the Network

(SMB) ............................................................................................. 1-5

Saving the Scanned Data in Boxes ................................................ 1-6

1.3 Settings for Using Network/Scanning Functions .......................... 1-7

Specifying Network Settings .......................................................... 1-7

Registering Destinations and Specifying Their Settings ................ 1-7

Setting the From Address .............................................................. 1-8

Specifying the Scan Settings ......................................................... 1-8

Specifying Program Settings ......................................................... 1-9

Specifying Default Scan Settings ................................................... 1-9

1.4 Connecting to the Network ........................................................... 1-10

Network Connection .................................................................... 1-10

1.5 Flow Chart of Setup and Scanning Operations ........................... 1-11

2 Scanning Documents

2.1 Control Panel .................................................................................... 2-2

2.2 Displaying the Scan Screen ............................................................. 2-5

bizhub 750/600 x-9

Introduction

2.3 Sending Data in an E-Mail Message (Scan to E-Mail) ....................2-6

Scan to E-Mail ................................................................................2-6

Using Programs ..............................................................................2-6

Selecting Group Addresses ............................................................2-9

Selecting Destinations From the Address Book ...........................2-12

Searching the Destination .............................................................2-13

To search the destination .............................................................2-15

Entering the Addresses Directly ...................................................2-16

2.4 Sending Data to a Server (Scan to FTP) ........................................2-19

Scan to FTP ..................................................................................2-19

Using Programs ............................................................................2-19

Selecting Group Addresses ..........................................................2-21

Selecting Destinations From the Address Book ...........................2-24

Entering the Addresses Directly ...................................................2-27

2.5 Sending Data to a PC on the Network (Scan to SMB) .................2-31

Scan to SMB .................................................................................2-31

SMB Transmission to Windows File Sharing (Mac OS X)/

Samba (Linux/Unix) .......................................................................2-31

SMB Transmission to Windows 98 SE/Windows Me ...................2-31

Using Programs ............................................................................2-32

Selecting Group Addresses ..........................................................2-34

Selecting Destinations From the Address Book ...........................2-36

Entering the Addresses Directly ...................................................2-39

2.6 Specifying the Scan Settings ..........................................................2-43

Available Settings .........................................................................2-43

File Type ........................................................................................2-45

To specify the File Type settings ..................................................2-45

Resolution .....................................................................................2-47

Simplex/Duplex .............................................................................2-48

To specify the Simplex/Duplex setting .........................................2-48

Original Type .................................................................................2-49

To specify the Original Type setting .............................................2-49

Scan Size ......................................................................................2-50

To specify the Scan Size setting ...................................................2-50

To enlarge/reduce the scan to a preset zoom ratio

(Zoom setting) ...............................................................................2-52

To specify the zoom ratio for scanning (Zoom setting) ................2-54

Density ..........................................................................................2-56

Original Setting .............................................................................2-57

To specify the Original Settings ....................................................2-57

Book Scanning (Application) .........................................................2-59

To use the “Book Scan” function .................................................2-59

Booklet Pagination (Application) ...................................................2-61

To specify Booklet Pagination settings ........................................2-61

Annotation (Application) ................................................................2-62

x-10 bizhub 750/600

Introduction

2.7 Checking the Settings .................................................................... 2-73

2.8 Checking the Scanner Transmission Log .................................... 2-83

Full Scan (Application) ................................................................. 2-64

Frame Erase (Application) ............................................................ 2-65

Center Erase (Application) ........................................................... 2-66

Non-Image Area Erase (Application) ............................................ 2-68

Neg-/Pos. Reverse (Application) .................................................. 2-69

Separate Scan .............................................................................. 2-70

File Name ..................................................................................... 2-72

To change the file name ............................................................... 2-72

Checking the Settings .................................................................. 2-73

To check a job .............................................................................. 2-74

Deleting Unneeded Destinations ................................................. 2-79

Specifying E-Mail Settings ........................................................... 2-81

To change the e-mail settings ...................................................... 2-82

Displaying the Current Jobs List .................................................. 2-83

Displaying the Job History List .................................................... 2-84

Displayed Information .................................................................. 2-85

3 Specifying Settings From the Control Panel

3.1 Settings on the Control Panel ......................................................... 3-2

Utility Types ................................................................................... 3-2

Other Related Settings ................................................................... 3-4

3.2 Displaying Setup Screens ................................................................ 3-5

To display the Scan screen ............................................................ 3-5

To display the User Setting screen ................................................ 3-7

To display the Administrator Setting screen .................................. 3-8

3.3 Registering Abbreviated Destinations .......................................... 3-10

E-Mail Destinations ...................................................................... 3-10

FTP Destinations .......................................................................... 3-12

SMB Destinations ........................................................................ 3-17

Box Destinations .......................................................................... 3-20

3.4 Registering Group Destinations .................................................... 3-22

To register a group destination .................................................... 3-22

3.5 Registering Program Destinations ................................................ 3-24

To register a program destination ................................................ 3-24

3.6 Specifying E-Mail Settings ............................................................. 3-27

Subject ......................................................................................... 3-27

Text .............................................................................................. 3-29

3.7 Setting the Main Scan Mode Screen ............................................ 3-31

Default Tab ................................................................................... 3-31

bizhub 750/600 x-11

Introduction

Program Default ............................................................................3-32

Address Book Default Index .........................................................3-33

Address Type Symbol Display ......................................................3-34

3.8 Setting the Save Format of the Data to Be Scanned ...................3-35

Black Compression Level .............................................................3-35

To specify the compression level .................................................3-35

3.9 One-Touch Registration List ..........................................................3-36

Address Book List .........................................................................3-36

Group List .....................................................................................3-37

Program List .................................................................................3-38

E-Mail Subject/Text List ................................................................3-39

3.10 Creating Annotation User Boxes ...................................................3-41

To create annotation user boxes ..................................................3-42

3.11 Specifying Network Settings ..........................................................3-45

To specify network settings ..........................................................3-45

3.12 TCP/IP Settings ...............................................................................3-46

Before Specifying the Settings .....................................................3-46

Items To Be Specified ...................................................................3-47

To specify TCP/IP settings ...........................................................3-48

IP Filtering .....................................................................................3-51

To specify IP Filtering settings ......................................................3-51

RAW Port No. ................................................................................3-53

3.13 NetWare Settings .............................................................................3-54

NetWare Parameters .....................................................................3-54

To specify NetWare settings .........................................................3-55

Status ............................................................................................3-58

3.14 http Server Settings ........................................................................3-59

IPP and http Parameters ...............................................................3-59

To specify IPP and http settings ...................................................3-60

Support Operation ........................................................................3-62

Printer Information ........................................................................3-63

3.15 FTP Settings .....................................................................................3-66

FTP Parameters ............................................................................3-66

To specify FTP settings ................................................................3-67

3.16 SMB Settings ...................................................................................3-69

SMB Parameters ...........................................................................3-69

To specify SMB settings ...............................................................3-70

3.17 AppleTalk Settings ..........................................................................3-73

AppleTalk Parameters ...................................................................3-73

To specify AppleTalk settings .......................................................3-73

x-12 bizhub 750/600

Introduction

3.18 Enabling LDAP Settings ................................................................. 3-75

3.19 Setting Up LDAP Settings .............................................................. 3-77

3.20 Search Default Setting ................................................................... 3-86

3.21 E-Mail TX (SMTP) Settings ............................................................. 3-87

3.22 E-Mail RX (POP) Settings ............................................................... 3-95

Enabling LDAP Parameters .......................................................... 3-75

To specify Enabling LDAP settings .............................................. 3-75

LDAP Server Registration Parameters ......................................... 3-77

To specify Setting Up LDAP settings ........................................... 3-80

Initial Setting for Search Details ................................................... 3-84

To specify the detect default server settings ............................... 3-86

E-Mail TX (SMTP) Parameters ...................................................... 3-87

To specify E-Mail TX (SMTP) settings .......................................... 3-88

SMTP Server Address .................................................................. 3-91

SMTP Detail ................................................................................. 3-92

SMTP Authentication ................................................................... 3-93

E-Mail RX (POP) Parameters ........................................................ 3-95

To specify E-Mail RX (POP) settings ............................................ 3-96

POP Server Address .................................................................... 3-98

3.23 Device Settings ............................................................................... 3-99

Device Parameters ....................................................................... 3-99

To specify device settings ........................................................... 3-99

3.24 Time Adjustment Settings ........................................................... 3-101

Time Adjustment Parameters ..................................................... 3-101

To specify time adjustment settings .......................................... 3-101

NTP Server Address ................................................................... 3-102

3.25 Status Notification Settings ......................................................... 3-104

Status Notification Parameters .................................................. 3-104

To specify status notification settings ....................................... 3-104

Notification Item Setting ............................................................ 3-105

3.26 Total Counter Report Setting ...................................................... 3-106

To specify the total counter report settings ............................... 3-106

Schedule Setting ........................................................................ 3-107

To specify the notification address settings .............................. 3-109

Notification Address Setting ...................................................... 3-109

3.27 PING Confirmation ........................................................................ 3-111

PING Confirmation Parameters ................................................. 3-111

To specify PING confirmation settings ...................................... 3-111

PING TX Address ....................................................................... 3-113

3.28 SLP Settings .................................................................................. 3-115

To specify SLP settings ............................................................. 3-115

bizhub 750/600 x-13

Introduction

3.29 LPD Settings ..................................................................................3-116

To specify LPD settings ..............................................................3-116

3.30 Prefix/Suffix Settings ....................................................................3-117

Prefix/Suffix Parameters .............................................................3-117

To specify the prefix/suffix settings ............................................3-117

Prefix/Suffix Setting ....................................................................3-119

3.31 Action for Invalid Certificate .........................................................3-121

To specify the Action for Invalid Certificate settings ..................3-121

3.32 SNMP Settings ...............................................................................3-123

SNMP Parameters ......................................................................3-123

To specify SNMP settings ..........................................................3-124

v1/v2c Setting .............................................................................3-125

v3 Setting ....................................................................................3-126

To specify the v3 settings ...........................................................3-127

3.33 Bonjour Setting ..............................................................................3-129

To specify the Bonjour settings ..................................................3-129

3.34 TCP Socket Setting .......................................................................3-131

To specify the TCP socket settings ............................................3-131

3.35 OpenAPI Settings ..........................................................................3-133

Access Setting ............................................................................3-133

Port No. .......................................................................................3-134

SSL .............................................................................................3-135

Authentication .............................................................................3-136

3.36 External Server Authentication ....................................................3-138

Using Active Directory ................................................................3-138

To specify the external server authentication settings ...............3-139

Using Novell NDS .......................................................................3-143

To specify the settings for using Novell NDS .............................3-143

Using NTLM v1/NTLM v2 ...........................................................3-145

To specify the settings for using NTLM v1/NTLM v2 .................3-145

4 Specifying Settings Using PageScope Web Connection

4.1 Items That Can Be Specified Using PageScope Web

Connection .........................................................................................4-2

User Mode ......................................................................................4-2

Administrator Mode ........................................................................4-3

4.2 Using PageScope Web Connection .................................................4-5

Operating Environment ...................................................................4-5

Accessing PageScope Web Connection ........................................4-5

Page Structure ................................................................................4-7

Web Browser Cache .......................................................................4-9

x-14 bizhub 750/600

Introduction

4.3 Logging On and Logging Off ......................................................... 4-10

4.4 User Authentication (User Mode) .................................................. 4-17

4.5 Account Track (User Mode) ........................................................... 4-19

For Internet Explorer ...................................................................... 4-9

For Netscape Navigator ................................................................. 4-9

Logging Off .................................................................................. 4-10

To log off ...................................................................................... 4-10

Logging On to User Mode (Public User) ...................................... 4-11

Logging On to User Mode

(Registered User/Box Administrator) ........................................... 4-13

To log on as a registered user/Box Administrator ....................... 4-13

Logging On to Administrator Mode ............................................. 4-14

To log on to Administrator mode ................................................. 4-15

Changing the User Password ...................................................... 4-17

To change the user password ..................................................... 4-17

Checking the User Registration Information ................................ 4-18

To check the account track information ...................................... 4-19

4.6 Address Book .................................................................................. 4-20

Registering New Destinations ...................................................... 4-20

To register new destinations ........................................................ 4-23

Editing abbreviated destinations .................................................. 4-24

Deleting the Address Book .......................................................... 4-24

4.7 Group Destination ........................................................................... 4-25

To register group destinations ..................................................... 4-25

4.8 Program Registration ..................................................................... 4-27

To register new destinations ........................................................ 4-35

4.9 Temporary One-Touch Registration ............................................. 4-37

To register temporary destinations .............................................. 4-37

4.10 Subject Registration ....................................................................... 4-39

To register the subject ................................................................. 4-40

4.11 Text Registration ............................................................................ 4-41

To register text ............................................................................. 4-42

4.12 Administrator Mode ........................................................................ 4-43

Basic Operation ........................................................................... 4-43

4.13 Time Adjustment Setting ............................................................... 4-44

To adjust the time ........................................................................ 4-44

4.14 User Authentication (Administrator Mode) .................................. 4-45

User Registration ......................................................................... 4-45

To register a user ......................................................................... 4-46

Checking or Changing the Registered User Information ............. 4-48

bizhub 750/600 x-15

Introduction

To check or change the registered user information ....................4-49

To delete a registered user ...........................................................4-51

Default Function Permission .........................................................4-52

To specify the default function permission settings .....................4-52

4.15 Account Track Registration (Administrator Mode) ......................4-53

Account Track Registration ..........................................................4-53

To register an account ..................................................................4-54

Checking or Changing the Registered Account Information ........4-56

To check or change the registered account information ..............4-56

To delete registered accounts ......................................................4-58

4.16 Administrator Password .................................................................4-59

To change the administrator password ........................................4-59

4.17 Prefix/Suffix ......................................................................................4-60

To register prefixes and suffixes ...................................................4-60

4.18 Import/Export ...................................................................................4-62

Importing .......................................................................................4-62

Exporting .......................................................................................4-62

4.19 Other .................................................................................................4-63

4.20 TCP/IP ...............................................................................................4-64

TCP/IP ...........................................................................................4-65

IP Address Filtering .......................................................................4-67

4.21 NetWare ............................................................................................4-68

NetWare Status .............................................................................4-69

4.22 IPP .....................................................................................................4-70

4.23 FTP ....................................................................................................4-72

FTP TX ..........................................................................................4-72

FTP Server ....................................................................................4-73

4.24 SNMP ................................................................................................4-74

4.25 SMB ..................................................................................................4-75

WINS Setting ................................................................................4-75

Client Setting ................................................................................4-76

Print Setting ..................................................................................4-77

4.26 AppleTalk .........................................................................................4-78

4.27 Bonjour Setting ................................................................................4-79

4.28 LDAP Setting ....................................................................................4-80

LDAP Setting ................................................................................4-80

LDAP Server Registration .............................................................4-81

4.29 E-Mail Setting ..................................................................................4-84

E-Mail RX (POP) ............................................................................4-84

x-16 bizhub 750/600

Introduction

4.30 SSL/TLS ........................................................................................... 4-89

4.31 Authentication ............................................................................... 4-100

4.32 OpenAPI ......................................................................................... 4-103

E-Mail TX (SMTP) ......................................................................... 4-86

SSL/TLS Setting ........................................................................... 4-91

To create a certificate .................................................................. 4-92

SSL/TLS Setting — Install a Certificate ....................................... 4-94

Set an Encryption Strength .......................................................... 4-95

Remove a Certificate .................................................................... 4-96

Set Mode using SSL .................................................................... 4-97

Processing Mode ......................................................................... 4-98

To specify the mode using SSL ................................................... 4-98

User Authentication/Account Track ........................................... 4-100

To specify the user authentication and account track

settings ....................................................................................... 4-101

Auto Logout ............................................................................... 4-102

4.33 TCP Socket Setting ...................................................................... 4-104

To specify the TCP socket settings ........................................... 4-105

5 Scan Function Troubleshooting

5.1 Error List ............................................................................................ 5-2

6 Appendix

6.1 Product Specifications ..................................................................... 6-2

Scanning Functions ....................................................................... 6-2

Network Function ........................................................................... 6-3

6.2 Entering text ...................................................................................... 6-5

To type text .................................................................................... 6-7

List of Available Characters ........................................................... 6-7

6.3 Glossary ............................................................................................. 6-8

6.4 Index ................................................................................................ 6-14

bizhub 750/600 x-17

About This Manual

This User’s Guide covers the bizhub 750/600 network and scanning functions.

This section introduces the structure of the manual and notations used for product names, etc.

This manual is intended for users who understand the basic operations of computers and the machine. For operating procedures of the Windows or Macintosh operating system and application programs, refer to the respective manuals.

Structure of the Manual

This manual consists of the following chapters.

Chapter 1 Before Using the Scan Functions

Chapter 2 Scanning Documents

Introduction

Chapter 3 Specifying Settings From the Control Panel

Chapter 4 Specifying Settings Using PageScope Web Connection

Chapter 5 Scan Function Troubleshooting

Chapter 6 Appendix

Lists the product specifications and the characters that can be entered from the control panel.

Notation

Product Name Notation in the Manual

bizhub 750/600 This machine, 750/600

Microsoft Windows 98 Windows 98

Microsoft Windows Me Windows Me

Microsoft Windows NT 4.0 Windows NT 4.0

Microsoft Windows 2000 Windows 2000

Microsoft Windows XP Windows XP

When the operating systems above are written together

Windows 98/Me Windows NT 4.0/2000/XP Windows 98/Me/NT 4.0/2000/XP

x-18 bizhub 750/600

Introduction

Explanation of Manual Conventions

Note

Text highlighted in this manner contains references and supplemental information concerning operating procedures and other descriptions. We recommend that this information be read carefully.

[] Names highlighted as shown above indicate keys on the control panel and buttons in the touch panel.

Touch panel screens are shown to check the actual display.

Reminder

Text highlighted in this manner indicates operation precautions. Carefully read and observe this type of information.

Titles indicate the contents of the section.

Basic Copy Operations

3.6 Selecting a Paper Setting

The paper size can be selected automatically according to the document size or it can be specified manually. Sp ecify the paper size according to the corresponding procedure, depending on the desired copy settings.

Note

The default setting is Auto Paper Select.

Automatically Selecting the Paper Size (Au to Paper Select S etting)

The size of the loaded d ocument is detected, and copies are produced u sing paper of the same size.

1 In the Basic screen, touch [Paper] .

The Paper screen appears.

Reminder

Be careful that your fi ngers are not pinched when t he front door is closed.

Detail

For details on the positions of p aper misfeeds, refer to Paper Misfeed Indications on page 5-7.

CAUTION

Metallic parts on the inside of the upper cover are very hot.

Touching any part other than the paper may result in

burns.

Basic Copy Operations Chapter 3

Detail

Text highlighted in this manner provides more detailed information

bizhub 750/600 3-31

concerning operating procedures or references to sections containing additional information. If necessary, refer to the indicated sections.

WARNING , CAUTION

Text highlighted in this manner indicates precautions to ensure safe use of this machine. "Warning" indicates instructions that, when not observed, may result in fatal or critical injuries. "Caution" indicates instructions that, when not observed, may result in serious injuries or property damage.

(The page shown above is an example only.)

bizhub 750/600 x-19

User’s Guides

The following User’s Guides have been prepared for this machine.

User’s Guide [Copy Operations]

This manual contains details on basic operations and the operating procedures for the various copy functions.

- Refer to this User’s Guide for details on operating procedures for copy

functions, including precautions on installation/use, turning the machine on/off, loading paper, and troubleshooting operations such as clearing paper misfeeds.

User’s Guide [Network Scanner Operations] <this manual>

This manual contains details on specifying network settings for standard equipment and on operations for scanning functions.

- Refer to this User’s Guide for details on operating procedures for network

functions and for using Scan to E-Mail, Scan to FTP and Scan to SMB.

Introduction

User’s Guide [Box Operations]

This manual contains details on operating procedures for using the boxes.

- Refer to this User’s Guide for details on operating procedures for using

the boxes on the hard disk.

User’s Guide [Enlarge Display Operations]

This manual contains details on operating procedures for using copy, network scanner and fax functions in Enlarge Display mode.

- Refer to this User’s Guide for details on operating procedures in Enlarge

Display mode.

User’s Guide [FK-502 Facsimile Operations]

This manual contains details on operating procedures for faxing.

- Refer to this User’s Guide for details on operating procedures for fax

functions when the fax kit is installed.

User’s Guide [Network Fax Operations]

This manual contains details on operating procedures for network faxing.

- Refer to this User’s Guide for details on operating procedures for network

fax functions (Internet Fax/IP Address Fax).

x-20 bizhub 750/600

Introduction

IC-202 User’s Guide/Quick Guide

This manual contains details on operating procedures using the optional Image Controller (IC-202).

- Refer to the User’s Guide (PDF data) provided in the User Software CD-

ROM or Quick Guide (printed matter) attached to IC-202 for the procedures to use the printer functions.

bizhub 750/600 x-21

Introduction

x-22 bizhub 750/600

Before Using the Scan Functions

Before Using the Scan Functions Chapter 1

Before Using the Scan Functions

1 Before Using the Scan Functions

1.1 Environment Required for Using the Scan Functions

The following conditions are required to use the network and scanning functions of this machine.

- The machine is connected to the network. (required)

The functions can be used over a TCP/IP network. For details on the connection, refer to “Connecting to the Network” on page 1-10. Also, network parameters such as the IP address of this machine must be specified in order to use the machine on the network. For details, refer to “Settings for Using Network/Scanning Functions” on page 1-7.

Before Using the Scan Functions Chapter 1

1-2 bizhub 750/600

Before Using the Scan Functions

1.2 Available Scanning Functions

“Scanning” refers to the operation of reading the image of a document fed through the ADF or placed on the original glass. The scanning functions can be used to temporarily store the scanned data in the internal memory of the machine and transmit the data in an e-mail message over the network or upload the data to a file server.

With the scanning functions, data can be sent to up to 516 destinations at the same time.

In addition, if an optional hard disk is installed, the data can be stored on the hard disk of this machine. This function can be used from the Box mode, which is described in the User’s Guide [Box Operations].

Note

The maximum number of destinations that can be selected at the same time is 516 (500 programmed destinations, 5 e-mail, FTP and SMB destinations entered directly and 1 box destination (Only when the hard disk is installed)).

Before Using the Scan Functions Chapter 1

Sending the Scanned Data in an E-Mail Message

The scanned data can be sent to a specified e-mail address. The destination is specified from the touch panel of this machine, and the scanned data is sent as an e-mail attachment.

For details, refer to “Sending Data in an E-Mail Message (Scan to E-Mail)” on page 2-6.

Original

Machine

E-mail and scan data

Memory

E-mail reception

SMTP server POP server

Internet

bizhub 750/600 1-3

Before Using the Scan Functions

Sending the Scanned Data as Files (FTP)

The scanned data is uploaded to a specified FTP server. The FTP server address, login password, and other information are entered from the touch panel of this machine.

The data files uploaded to the FTP server can be downloaded from a computer on the network.

For details, refer to “Sending Data to a Server (Scan to FTP)” on page 2-19.

Original

Machine

Scan data

Download

Before Using the Scan Functions Chapter 1

Memory

FTP server

Internet

1-4 bizhub 750/600

Before Using the Scan Functions

Sending the Scanned Data to a Computer on the Network (SMB)

The scanned data can be sent to a shared folder on a specified computer. The name of the destination computer, login password, and other information are entered from the touch panel of this machine.

For details, refer to “Sending Data to a PC on the Network (Scan to SMB)” on page 2-31.

Original

Machine

Scan data

Memory

Save to a shared folder

Before Using the Scan Functions Chapter 1

bizhub 750/600 1-5

Before Using the Scan Functions Chapter 1

Before Using the Scan Functions

Saving the Scanned Data in Boxes

The scanned data can be saved in boxes created on the machine’s internal hard disk. The data can be used in other applications. The file name can be entered from the touch panel of the machine.

In addition, if the scanned data is saved in “Annotation User box”, you can deliver it over the Internet by adding any domain name and the delivery date and time.

For the procedure to save in an annotation user box, refer to “Annotation (Application)” on page 2-62. For saving other data in a box or reusing the data that has been saved, refer to User’s Guide “Box Operations”.

Machine

Hard disk

1-6 bizhub 750/600

Before Using the Scan Functions

1.3 Settings for Using Network/Scanning Functions

It is recommended that the settings described below be specified before using the network/scanning functions. The network settings described in “Specifying Network Settings” must be specified first. Set other items as necessary.

Detail

For details on specifying network settings, refer to the chapters listed below. “TCP/IP Settings” on page 3-46 “E-Mail TX (SMTP) Settings” on page 3-87 “4 Specifying Settings Using PageScope Web Connection”

Specifying Network Settings

An IP address must be assigned to the machine and settings such as the SMTP server must be specified to use the machine on the network. Be sure to set them.

Before Using the Scan Functions Chapter 1

There are two methods for specifying settings. One method is to specify the settings from the touch panel of this machine. The other method is to use PageScope Web Connection from a Web browser on a computer on the network.

Registering Destinations and Specifying Their Settings

The destinations (recipients) of scanned data must be registered.

The following registration methods are available.

- Register from the touch panel of the machine.

- Use PageScope Web Connection from a computer on the network.

The following types of destinations can be registered.

Type Description

Abbreviated Destination The destination can be selected with one button.

Group Multiple destinations can be registered in groups. E-mail, FTP,

SMB, and box destinations can be registered together in a single group.

Note

The destination can also be entered before scanning. This is called “direct input”. For details, refer to “Entering the Addresses Directly” on page 2-16.

bizhub 750/600 1-7

+ 364 hidden pages