Milwaukee 58-03-0475 User Manual

TITLE

WIRING INSTRUCTIONS

ORBITAL SANDER

BULLETIN

a 58-03-0475

CRIMP LEAD 3 AND LEAD 7 TOGETHER IN Tl BEFORE INSERTING INTO SWITCH. CRIMP LEAD 4 AND LEAD 8 TOGETHER IN Tl BEFORE INSERTING INTO SWITCH. INSERT TERMINALS T2 ON LEADS 5 AND 6 INTO BRUSH

HOLDER BEFORE ROUTING THRU WIRE TRAPS. TUCK LEADS 7 AND 8 DOWN INTO THE

WIRE TRAP UNDER SWITCH. TUCK LEADS 3 AND 4 DOWN

INTO THE WIRE TRAPS BETWEEN SWITCH AND FIELD.

NOTE: LEAVE NO SLACK ON FIELD

SIDE OF WIRE TRAPS.

’ ’

‘WIRE t4

BLACK

SCHEMATIC

NOTE: All leads must be held to 5 l/8’. All field leads to ba measured from and perpendicular to laminations. All lead lengths are before stripping.

1 TERMINAL DESCRIPTION 1

kiiii%TOR DESCRIPTION 1