Milwaukee 58-01-1830 User Manual

WIRING INSTRUCTIONS

TITLE

MILWAUKEE ELECTRIC TOOL CORP. 13135 WEST LISBON RD. BROOKFIELD, WIS.

CORDLESS IMPACT WRENCH

Route red brush assembly leadwire #2 through wire traps as shown.

Route black brush assembly leadwire #1 through wire traps as shown.

DATE

Mar. 2010

BULLETIN

58-01-1830

NOTE:

Terminals must be soldered to switch.

ROUTE THE LEADWIRES BETWEEN THE POSTS.

Black leadwire #5

White leadwire #4

WIRING SPECIFICATIONS

Wire Wire Origin or

No. Color Part No. Gauge Length Terminals, Connectors and End Wire Preparation 1 Black 22-18-1980 ----- Brush Assembly. 2 Red 22-18-2080 ----- Brush Assembly. 3 Red ----- ----- ----- Component of Connector Block Assy. 22-56-0279. 4 Red ----- ----- ----- Component of Connector Block Assy. 22-56-0279. 5 Black ----- ----- ----- Component of Connector Block Assy. 22-56-0279. 6 Black ----- ----- ----- Component of Connector Block Assy. 22-56-0279.

BULK LEAD WIRE - BULLETIN 58-01-0003

SWITCH POLARITY SENSITIVE

If wired incorrectly switch will be damaged and destroyed!

WARNING

White leadwire #3

Black leadwire #6

NOTE:

On some early models, leadwires #3 and #4 may be red. Later production and service replacements are white.

NOTE:

All lead lengths are before stripping. All leads must be held to ± .125" unless speciﬁ ed elsewhere. Strip wire per ES 13-11. Crimp terminals per ES 13-15.

TERMINAL DESCRIPTION

Qty.Code Part No.

Drwg. 5