Milwaukee 2592-20 User Manual
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
Cat. No.
No de Cat.
2592-20
M12™ JOBSITE SPEAKER
HAUT-PARLEUR M12™
BOCINA M12™
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
IMPORTANT SAFETY INSTRUCTIONS
WARNING READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS.
Failure to heed all warnings listed below, may result in electric shock, fi re and/or serious
personal injury. KEEP THESE INSTRUCTIONS.
• Read these instructions.
• Keeps these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water. Never im-
merse the apparatus in liquid or allow a liquid to fl ow
inside the apparatus. Water entering an apparatus
will increase the risk for electric shock.
• Clean only with dry cloth. Certain cleaning agents
and solvents are harmful to plastics and other insulated parts. Some of these include: gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing
ammonia. Clean dust and debris from vents. Keep the
apparatus handle clean, dry and free of oil or grease.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not use near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifi ers) that produce heat.
• Use only attachments/accessories specifi ed by
the manufacturer.
• Only operate this apparatus in a well ventilated area.
• Refer all servicing to qualifi ed service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture or does not operate normally. Service or maintenance performed by
unqualifi ed personnel could result in a risk of injury.
• A battery operated apparatus with integral batteries or a separate battery pack must be recharged
only with the specifi ed charger for the battery. A
charger that may be suitable for one type of battery
may create a risk of fi re when used with another battery.
• Use battery operated apparatus only with specifi -
cally designated battery packs. Use of any other
batteries may create a risk of fi re.
• When battery pack is not in use, keep it away
from other metal objects like: paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause sparks, burns, or a fi re.
• Avoid body contact with grounded surfaces such
as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is grounded.
• Never disassemble the apparatus or try to do any
rewiring on the apparatus's electrical system.
• Do not expose this apparatus to dripping and splashing, or place objects fi lled with liquids on this unit.
SPECIFIC SAFETY RULES
• Maintain labels and nameplates. These carry important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
• This apparatus is designed to be powered by a
12 volt MILWAUKEE Li-ion battery pack. Do not
attempt to use with any other voltage or power supply.
2
Federal Communications Commission
WARNING: Changes or modifications to
this unit not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FUNCTIONAL DESCRIPTION
2
1
1. Volume down
2. Power/Pair
3. Stereo AUX jack
4. USB power outlet
5. Fuel gauge
6. Volume up
7. Indicator light
3
4
5
6
7
8. Hang hook
9. Battery bay
10. Bass port
8
10
SPECIFICATIONS
Cat.
No.
2592-20 12 DC 5 DC 2.1
Input
Volts
USB Output
Volts
USB Output
Amps
SYMBOLOGY
Volts
Direct Current
To reduce the risk of injury, user
must read operator’s manual.
Federal Communications
Commission
ASSEMBLY
WARNING Recharge only with the
charger specifi ed for the battery. For specifi c
charging instructions, read the operator’s
manual supplied with your charger and battery.
Inserting/Removing the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the speaker.
To insert the battery, slide the pack into the body of
the speaker. Make sure it latches securely into place.
Fuel Gauge
The Fuel Gauge will show the remaining battery
charge for 2-3 seconds after turning on the speaker.
To signal the end of charge, 1 light on the fuel gauge will
blink slowly until the speaker shuts off automatically.
Battery Pack Protection
To protect the life of the battery pack, the speaker will
shut off when the battery’s charge becomes too low.
If this happens, remove the battery pack and charge
it according to the charger’s instructions.
Connecting an Auxiliary Device
Connect an MP3 player, CD player, or other audio
device directly to the speaker using the stereo auxiliary jack AUX IN.
USB Power Outlet
This outlet can be used to charge a cell phone, power
an MP3 player or any other device that uses less than
2.1A of DC electrical current.
NOTE: Any device that uses more than 2.1 A of DC
electrical current will trip a self-resetting overload and
disable the output.
OPERATION
9
WARNING To reduce the risk of fi re or
electric shock, do not expose this speaker to
rain or moisture.
Turning On/Off and Connecting to Bluetooth
Press the Power/Bluetooth
speaker on and off.
button to turn the
• If no Bluetooth device was previously paired,
Bluetooth pairing will begin automatically and the
indicator light will fl ash continuously.
• The speaker will continue to search for a signal for
10 minutes.
• To manually pair a device, turn on the speaker and
select "M12 Speaker" on the Bluetooth capable
device.
• Once paired, the speaker will automatically reconnect to the same device when the speaker is
turned on.
• To pair the speaker to a different device, press
and hold the power/pair button for 3 seconds until the indicator light fl ashes. It will then be in pair
mode and can be connected to a different device.
• Once the device has successfully paired with the
speaker, use the device controls to move through
tracks and control volume.
Volume
Use the
NOTE: To control the volume using the device's
controls, fi rst turn the speaker volume to max (a
beep will sound).
to increase or decrease the volume.
MAINTENANCE
WARNING To reduce the risk of injury,
always unplug the charger and remove the
battery pack from the charger or tool before
performing any maintenance. Never disassemble the tool, battery pack or charger.
Contact a MILWAUKEE service facility for
ALL repairs.
Maintaining Tool
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
If the tool does not start or operate at full power
with a fully charged battery pack, clean the contacts
on the battery pack. If the tool still does not work
properly, return the tool, charger and battery pack,
to a MILWAUKEE service facility for repairs.
WARNING To reduce the risk of per-
sonal injury and damage, never immerse your
tool, battery pack or charger in liquid or allow
a liquid to fl ow inside them.
Cleaning
Clean dust and debris from charger and tool
vents. Keep tool handles clean, dry and free of oil
or grease. Use only mild soap and a damp cloth
to clean the tool, battery pack and charger since
certain cleaning agents and solvents are harmful
to plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Never
use fl ammable or combustible solvents around tools.
Repairs
For repairs, return the tool, battery pack and charger to the nearest service center listed on the back
cover of this operator's manual.
3
ACCESSORIES
For a complete listing of accessories refer
WARNING Always remove battery
pack before changing or removing accessories. Only use accessories specifically
recommended for this tool. Others may be
hazardous.
LIMITED WARRANTY - USA AND CANADA
Every MILWAUKEE power tool (including cordless product – tool, battery pack(s) - see separate & distinct CORDLESS BATTERY PACK LIMITED
WARRANTY statements & battery charger and Work Lights*) is warranted to the original purchaser only to be free from defects in material and
workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on an electric power tool which, after examination, is
determined by MILWAUKEE to be defective in material or workmanship for a period of fi ve (5) years* after the date of purchase unless otherwise
noted. Return of the power tool to a MILWAUKEE factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and
insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that
MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations,
abuse, normal wear and tear, lack of maintenance, or accidents.
*The warranty period for, Job Site Radios, M12™ Power Port and Trade Titan™ Industrial Work Carts is one (1) year from the date of purchase.
The warranty period for a LED Work Light and LEDUpgrade Bulb is a limited LIFETIME warranty to the original purchaser only, if during normal
use the LED bulb fails the Work Light or Upgrade Bulb will be replaced free of charge.
*This warranty does not cover Air Nailers & Stapler, Airless Paint Sprayer, Cordless Battery Packs, Gasoline Driven Portable Power Generators,
Hand Tools, Hoist – Electric, Lever & Hand Chain, M12™ Heated Jackets, Reconditioned product and Test & Measurement products. There
are separate and distinct warranties available for these products.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE power tool product. The manufacturing date of the
product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT
FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE
THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE
DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY
DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUD-
ING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE;
TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF
THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call
1.800.SAWDUST (1.800.729.3878) to locate your nearest MILWAUKEE factory Service Center location.
LIMITED WARRANTY - MEXICO, CENTRAL AMERICA AND CARIBBEAN
TECHTRONIC INDUSTRIES' warranty is for 5 year since the original purchase date.
This warranty card covers any defect in material and workmanship on this Power Tool.
To make this warranty valid, present this warranty card, sealed/stamped by the distributor or store where you purchased the product, to the
Authorized Service Center (ASC). Or, if this card has not been sealed/stamped, present the original proof of purchase to the ASC.
Call toll-free 1 800 832 1949 to fi nd the nearest ASC, for service, parts, accessories or components.
Procedure to make this warranty valid
Take the product to the ASC, along with the warranty card sealed/stamped by the distributor or store where you purchased the product, and
there any faulty piece or component will be replaced without cost for you. We will cover all freight costs relative with this warranty process.
Exceptions
This warranty is not valid in the following situations:
a) When the product is used in a different manners from the end-user guide or instruction manual.
b) When the conditions of use are not normal.
c) When the product was modifi ed or repaired by people not authorized by TECHTRONIC INDUSTRIES.
Note: If cord set is damaged, it should be replaced by an Authorized Service Center to avoid electric risks.
SERVICE AND ATTENTION CENTER
Rafael Buelna No.1.
Model:
Col. Tezozomoc Mexico, Azcapotzalco D.F.
Date of Purchase:
Ph. 01 800 832 1949
Distributor or Store Stamp:
IMPORTED AND COMMERCIALIZED BY:
TECHTRONIC INDUSTRIES MEXICO, .S.A. DE C.V.
Av. Santa Fe 481 piso 6, Col. Curz Manca.
CP 05349, Cuajimalpa, D.F.
to your MILWAUKEE catalog or go online to
www.milwaukeetool.com. To obtain a catalog,
contact your local distributor or a service center.
4
CONSIGNES DE SÉCURITÉ IMPORTANTES
AVERTISSEMENT LIRE, COMPRENDRE ET SUIVRE TOUTES LES
INSTRUCTIONS. Le non respect des avertissements ci-dessous peut entraîner un choc
électrique, un incendie et/ou des blessures graves. CONSERVER CES INSTRUCTIONS.
• Lire les instructions suivantes.
• Conserver ces instructions.
• Respecter tous les avertissements.
• Suivre toutes les instructions.
• Ne pas utiliser cet appareil à proximité de l’eau.
Ne jamais immmerger l’appareil dans un liquide ou
laisser un liquide s’infi ltrer dans celui-ci. La pénétra-
tion de l’eau dans l’appareil accroît le risque de choc
électrique.
• Nettoyer seulement avec un chiffon sec. Cer-
tains agents de nettoyage et certains solvants
peuvent détériorer le plastique et d’autres pièces
isolées. En voici des exemples : l’essence, la térébenthine, les diluants à laque ou à peinture, les
solvants chlorés, l’ammoniaque et les détergents
à usage domestique qui en contiennent. Nettoyer
les évents de l’outil des débris et de la poussière.
Garder les poignées de l’outil propres, sèches et
exemptes d’huile ou de graisse.
• Ne pas obstruer les ouvertures de ventilation.
Installer conformément aux instructions du fabricant.
• Ne pas faire fonctionner l’outil électrique à
proximité de sources de chaleurs comme des
radiateurs, des registres de chaleur, des poêles ou
d’autres appareils (notamment des amplifi cateurs)
produisant de la chaleur.
• Utiliser seulement des accessoires spécifi és par
le fabricant.
• Utiliser uniquement cet appareil dans un lieu
bien ventilé.
• Confi er toute réparation à un personnel de
service qualifi é. Une réparation est nécessaire
si l’appareil est endommagé d’une façon quelconque, comme : cordon ou prise d’alimentation
endommagé(e), liquide renversé ou objets tombés
dans l’appareil, exposition de l’appareil à la pluie ou
à l’humidité, appareil ne fonctionnant pas normalement. La réparation ou l’entretien par des personnes
non qualifi ées présente des risques de blessures.
• Le bloc-piles d’un appareil fonctionnant à piles,
qu’il soit intégré ou amovible, ne doit être rechargé qu’avec le chargeur spécifi é. Un chargeur
approprié pour un type de piles peut créer un risque
d'incendie s'il est utilisé avec un autre type de piles.
• Utiliser exclusivement les blocs-piles spéci-
fi quement indiqués pour l’appareil. L'usage de
tout autre bloc-piles peut créer un risque d'incendie.
• Lorsque le bloc-piles n’est pas en usage, le tenir
à l’écart d’articles métalliques tels que : les attaches trombones, pièces de monnaie, clés,
clous, vis et autres petits objets métalliques risquant d'établir le contact entre les deux bornes.
La mise en court-circuit des bornes des piles peut
causer des étincelles, des brûlures ou un incendie.
• Éviter tout contact du corps avec des surfaces
mises à la terre, telles que les tuyaux, radiateurs,
cuisinières et réfrigérateurs. Le risque de choc
électrique est accru lorsque le corps est mis à la terre.
• Ne jamais démonter l’appareil ou tenter de procéder à la réfection du câblage de son système
électrique.
• Ne jamais exposer cet appareil à des risques de
coulures et d’éclaboussements, et ne jamais poser d’objets remplis de liquides sur cet appareil.
RÈGLES DE SÉCURITÉ
PARTICULIÈRE
• Entretenez les étiquettes et plaques signalétiques. Les indications qu’elles contiennent sont
précieuses. Si elles deviennent illisibles ou se
détachent, faites-les remplacer gratuitement à un
centre de service MILWAUKEE accrédité.
• Cette radio fonctionne avec une alimentation
en courant universelle de 12 V MILWAUKEE,
n˚ de cat. 23-81-0700, ou un bloc-piles de 12 V
MILWAUKEE. Ne pas tenter d’utiliser le produit à une
autre tension ou avec un autre type d’alimentation.
Federal Communications Commission
nuler l’autorité de l’utilisateur à utiliser cet équipement.
Ce dispositif est conforme à la partie 15 des règles
de la FCC. Son fonctionnement est soumis aux conditions suivantes : (1) cet appareil ne doit produire
aucun brouillage préjudiciable et (2) cet appareil doit
fonctionner en dépit de tout brouillage capté, y compris le brouillage pouvant mener à un fonctionnement
non désiré.
Cet équipement a été testé et déclaré conforme aux
limites des dispositifs numériques de classe B, en
vertu de la section 15 des réglementations de la FCC.
Ces limites ont pour but de fournir une protection
raisonnable contre les interférences nuisibles dans le
cadre d’une installation résidentielle. Cet équipement
génère, utilise et peut émettre de l’énergie de radiofréquence. Il est donc recommandé de l’installer et de
l’utiliser conformément aux instructions afi n d’éviter
toute interférence nuisible aux communications radio.
Cependant, il n’existe aucune garantie selon laquelle
des interférences ne se produiront pas dans le cas
d’une installation spécifi que. Si cet appareil provoque
des interférences nuisibles pour les réceptions radio
et télévisées, ce qui peut être déterminé en l’éteignant
puis en le rallumant, il est conseillé d’y remédier en
suivant l’une ou plusieurs des mesures suivantes:
• Réorienter ou repositionner l’antenne réceptrice.
• Augmenter l’espace entre l’équipement et le ré-
• Brancher l’équipement dans une prise sur un circuit
• Consulter le concessionnaire ou un technicien radio/
AVERTISSEMENT: Les changements ou
les modifi cations apportés à cette unité non
expressément approuvés par l’organisme
responsable de la conformité peuvent an-
cepteur.
différent de celui sur lequel le récepteur est connecté.
TV expérimenté pour obtenir de l’aide.
SPECIFICATIONS
No de
Cat.
Tension
d’alimentation
sortie du port
USB
2592-20 12 DC 5 DC 2,1
5
Tension à la
Ampérage à la
sortie du port
USB
Loading...