Milwaukee 2463-22 User Manual

Metco Part Number: TTi Part Number:

ECO
ECO Date

37072

01/02/2013

58-14-2495 961011043

* See back page for date code and revisions.

OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR

Cat. No.

No de cat.

2461-20
2462-20
2463-20

M12™ CORDLESS IMPACT WRENCHES AND IMPACT DRIVER
CLÉS À CHOCS ET VISSEUSE M12™
LLAVES DE IMPACTO E IMPULSOR DE IMPACTO DE M12™

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.

Failure to follow the warnings and instructions may result in electric shock, fi re and/or
serious injury. Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive at­mospheres, such as in the presence of fl am-
mable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

• Keep children and bystanders away while
operating a power tool. Distractions can cause

you to lose control.

ELECTRICAL SAFETY

WORK AREA SAFETY

• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will

reduce risk of electric shock.

• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi­tions. Water entering a power tool will increase

the risk of electric shock.

• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords

increase the risk of electric shock.

• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use

of a cord suitable for outdoor use reduces the risk
of electric shock.

• If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the infl uence of drugs, alcohol or medi-
cation. A moment of inattention while operating

power tools may result in serious personal injury.

• Use personal protective equipment. Always
wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.

• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with

your fi nger on the switch or energising power tools
that have the switch on invites accidents.

• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may
result in personal injury.

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.

• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct
power tool for your application. The correct

power tool will do the job better and safer at the
rate for which it was designed.

• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must
be repaired.

• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such

preventive safety measures reduce the risk of
starting the power tool accidentally.

• Store idle power tools out of the reach of chil­dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the

hands of untrained users.

• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits
etc., in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool

for operations different from those intended could
result in a hazardous situation.

BA TTER Y T OOL USE AND CARE

• Recharge only with the charger specifi ed by
the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of fi re
when used with another battery pack.

• Use power tools only with specifi cally desig-
nated battery packs. Use of any other battery

packs may create a risk of injury and fi re.

• When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one

2

terminal to another. Shorting the battery termi­nals together may cause burns or a fi re.

•

Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac­cidentally occurs, fl ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

SERVICE

• Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the power

tool is maintained.

SPECIFIC SAFETY RULES

• Hold power tool by insulated gripping sur­faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners

contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the
operator an electric shock.

• Wear ear protectors. Exposure to noise can
cause hearing loss.

• Keep hands away from all cutting edges and
moving parts.

• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.

• WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other
masonry products, and

•

arsenic and chromium from chemically-treated lumber.

Y our risk from these exposures varies, depending

on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe­cially designed to fi lter out microscopic particles.

FUNCTIONAL DESCRIPTION

Cat. No.
2462-20

1. Trigger

2. Control switch

3. LED

4. Drive Shank

5. Fuel Gauge

6. 1/4" square drive

7. 3/8" square drive

4

3

2

1

6

Cat. No.
2461-20

7

Cat. No.
2463-20

5

SYMBOLOGY

Volts
Direct Current

Impacts per Minute Under
Load (IPM)

No Load Revolutions per
Minute (RPM)

Underwriters Laboratories, Inc.
United States and Canada

SPECIFICATIONS

Cat. No. Volts DC RPM Drive Shank IPM
2461-20

2462-20
2463-20

12
12
12

0-2500
0-2500
0-2500

1/4" square

1/4" Hex

3/8" Square

0-3800
0-3300
0-3300

ASSEMBLY

WARNING Recharge only with the

charger specifi ed for the battery. For specifi c
charging instructions, read the operator’s
manual supplied with your charger and battery.

Inserting/Removing the Battery

To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.

WARNING Always remove battery

pack before changing or removing accesso­ries. Only use accessories specifi cally recom-
mended for this tool. Others may be hazardous.

WARNING Use only sockets and other

accessories specifically designed for
use on impact wrenches and drivers. Other
sockets and accessories might shatter or
break causing injury.

Attaching and Removing Accessories

These tools are intended only for use with acces­sories designed for impact wrenches and drivers.
Other sockets could shatter or break, causing injury.

Cat. No. 2462-20

This driver is intended for use with drill and driver
bits with a 1/4" hex shank and ball detent recess.

1. To attach an accessory, pull the ring
out and insert the accessory shank.
Release the ring. It may be necessary
to pull the bit out slightly to engage the
holding mechanism.

2. To remove the accessory, pull out the
ring and remove the accessory. Re­lease the ring.

Cat. No. 2461-20 and 2463-20

1. To attach a socket, align the accessory with the
drive shank and push it fi rmly over the retaining ring.

2. To remove the accessory, pull the accessory of f
the drive shank.

3