
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
M18™ ROCKET™ DUAL POWER TOWER LIGHT
EXAMPLE:
00
Component Parts (Small #)
0
Are Included When Ordering
The Assembly (Large #).
92
41(3x)
36
31
91
30
84a
96
93
97
94
58(6x)
17
101
95
(2)
99
100
(3x)
93
84a
94
98
93 94
96 97
89
CATALOG NO.
11 50
80
80b 80c
11 80
81
81a
*
82a 82b
82
82c 82d
11
83d
83b
52(4x)
83a 83b 83c
83
83d 83e
13
12(3x)
16(3x)
SERVICE PARTS LIST
STARTING
SERIAL NO.
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
9 31-12-0027 Main Support Tube Lower Cap (1)
10 44-14-0240 Wire Leg Linkage (3)
11 --------------- Power Cord with Ferrite Bead (1)
12 44-04-0105 Support Leg (3)
13 42-78-2131 Main Support Column (1)
16 44-60-1655 Leg Support Pin (3)
17 43-62-0396 Switch Handle Support (less switch) (1)
20 45-60-2131 Large Tube Base Support (1)
23 45-76-2120 Large Tube (1)
30 42-40-2131 Small Tube Slide Bushing (1)
31 45-76-2131 Small Tube (1)
36 42-52-2120 LED Mounting Cap Support with Nut (1)
41 06-82-0069 M3.0 x 30 Pan Hd. ST T-10 Screw (3)
44 45-56-0110 Sliding Handle Guide Strap (2)
48 42-36-2131 M18™ Leg Support Bracket (1)
50 06-82-0019 3.5 x 14 Pan Hd. ST T-15 Screw (16)
51 06-82-0059 M4.0 x 27.5 Pan Hd. T-20 Machine Screw (4)
52 06-82-0039 M3.5 x 12 Pan Hd. ST T-15 Screw (10)
54 44-40-0485 M4 Nut (4)
56 45-88-0202 Washer (3)
57 06-75-0006 M6 Hex Socket Machine Screw (1)
58 06-82-0029 3.5 x 20 Pan Hd. ST T-15 Screw (12)
80 44-06-0102 Lens Cover Assembly (1)
80b --------------- LED Lens Cover (1)
80c --------------- LED Lens (1)
81 23-26-2131 LED Light Assembly
*
81a --------------- LED Light Assembly (1)
82 42-52-2131 LED Mounting Cap w/ Washers and Screws (1)
82a --------------- PH2 Round Head Washer Screw (2)
82b --------------- Spring Washer (2)
82c --------------- Washer (2)
82d --------------- Mounting Cap (1)
83 31-55-0075 LED Shroud Assembly (1)
83a --------------- Shroud Support - Right (1)
83b --------------- Shroud Support - Left (1)
83c --------------- LED Shroud (1)
83d 10-20-1018 Warning Label - Left (1)
83e 10-20-1019 Warning Label - Right (1)
84a 44-10-0685 Clamp Lever (2)
87 43-76-2131 Electronics and Housing Assembly (1)
88 31-44-0347 Sliding Handle Assembly (1)
89 23-66-0063 Switch Box Assembly (1)
91 34-40-0355 O-Ring (1)
92 34-40-0357 O-Ring (1)
93 45-22-0180 Upper Sleeve (1)
94 45-22-0185 Lower Sleeve (1)
95 42-36-0195 Retaining Bracket (2 piece) (1)
88
96 31-17-0090 Small Tube Clamp Assembly (1)
97 31-17-0095 Large Tube Clamp Assembly (1)
98 14-46-2131 Upper And Lower Clamp Service Kit (1)
87
99 45-22-0165 Sleeve (1)
100 06-82-0180 M2.5 x 20mm Round Hd. Torx Screw (3)
101 40-50-0255 Torsion Spring (1)
102 12-20-0126 Service Nameplate (Not Shown) (1)
103 10-20-0363 Warning Label (Not Shown) (1)
56
(2x)
82c
(2x)
52
(6x)
48
44(2x)
51(4x)
2131-20
50(6x)
80b
80c
81a
57
82a(2x)
82b(2x)
82d
83e
83c
83a
54
(4x)
9
58
(6x)
10(3x)
BULLETIN NO.
54-06-2140
REVISED BULLETIN
WIRING INSTRUCTION
DATE
Oct. 2021
J50A
w/ Power Cord and Grommet
Adjustments may be
needed to Clamping
Assemblies 96 and 97
to prohibit sliding when latched.
Tighten or loosen adjustment screw
and flip clamp lever to the feel. If
clamping the lever seems too
difficult do not force lever.
Screw should be loosened
slightly and try securing the
lever again. If lever seems too
loose, tighten screw slightly and flip clamp lever to the feel.
Adjustment
Screws
(1)
NOTE:
*
The service replacement for LED Light Assembly (81) may appear slightly
dierent from the original assembly but is completely interchangeable into
23
20
the Tower Light.
MILWAUKEE TOOL l www.milwaukeetool.com
MILWAUKEE TOOL l www.milwaukeetool.com
13135 W. LISBON RD., BROOKFIELD, WI 53005
13135 W. Lisbon Road, Brookeld, WI 53005
Drwg. 1
Drwg. 2