Milton Roy Mixing VLA User Manual

®
HELISEM
RANGE
VL SERIES MIXERS
Open tanks from 0,5 to 5 m3– Atmospheric pressure – Temperature up to 70°C
TYPE VLA
General characteristics
Agitator with direct drive
Lantern with radial bearing
Lower shaft provided with a marine impeller
Velocity : 1000 tr/m and 1500 tr/m
Capacities
From 0.5 to 5 m3approximately
Operating conditions
Atmospheric pressure
Temperature up to 70°C
Main applications
Homogenization
Dissolution
Preparation of reagents
Neutralization
Electric characteristics
230/400 V three-phase
50 Hz
IP 55
(please consult us for any other voltage and frequency)
Options (depending on mixer type)
Special motors (60 Hz)
Halar coating
Second impeller
ATEX mixer
Operational limits
Operation prohibited during draining
Use of variable speed not possible
Not recommended for products sensitive
to shearing
Maximum viscosity of 100mPas
Density < = 1,1
Construction materials
Stainless steel 316L
Painting PU : RAL 1018 on the drive system
(please consult us for any other material)
SPECIFICATIONS
Type Rated power Rotation speed Maximum height Propeller diameter Propeller flowrate Weight Torque
(kW) (rpm) (mm) H (mm) D (m3/h) (Kg) (Nm)
2430S 0.37 1000 1500 128 69 20 7
2530S 0.75 1500 1500 128 104 20 9
3530S 0.75 1500 1500 140 136 20 9
4630S 1.5 1500 1500 160 203 27 20
5630S 1.5 1500 1000 200 396 27 20
The minimum height of the liquid at the top of the impeller is 300 mm. It is necessary to respect a distance of 150 mm between the flange and the level of the liquid.
DIMENSIONS (MM)
Type A B C E F
2430S 388 - 12 200 165
2530S 388 - 12 200 165
3530S 388 - 12 200 165
4630S 425 - 12 200 165
5630S 425 - 12 200 165
Please consult us for any other request.
MILTON ROY MIXING
10, rue du bois Gasseau BP N°94 77212 AVON Cedex FRANCE Tel : +33 (0) 1.60.74.95.20 Fax : +33 (0) 1.60.74.95.29 www.miltonroymixing.com
Ref: MRM8212201-06/09-Rev02-All rights reserved for modification without prior notice-non binding information
www.miltonroy.com
Loading...