Milton CAT 272DXHP User Manual

FEATURES:

The Cat®272D XHP Skid Steer Loader, with its long wheel base and vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling. The 272D XHP features the following:

 Sealed and pressurized cab provides a cleaner and quieter operating

environment.

 Seat mounted adjustable joystick controls and air ride seat make the

D Series the industry leader in operator comfort.

 High performance power train provides maximum performance and

production capability through the Electronic Torque Management system, standard two speed travel and an industry exclusive electronic hand/foot throttle with decel pedal capability.

 Electronically controlled Cat C3.8 engine provides high horsepower

and torque while meeting U.S. EPA Tier 4 Interim (EU Stage IIIB) requirements.

 Cat “Intelligent Leveling” system (ILEV) provides industry leading

technology, integration and exclusive optional features such as dual direction self level, work tool return to dig and work tool positioner.

 XHP hydraulic system provides high flow and high pressure that

delivers industry leading hydraulic horsepower to efficiently run even the most power hungry work tools.

 Standard Speed Sensitive Ride Control system improves operation

on rough terrain, enabling better load retention, increased productivity and greater operator comfort.

 Broad range of performance matched Cat Work Tools make the

Cat Skid Steer Loader the most versatile machine on the job site.

Engine

Engine Model Cat®C3.8 (turbocharged) Gross Power SAE J1995 82 kW 110 hp Net Power SAE 1349 79 kW 106 hp Displacement 3.8 L 232 in

Stroke 120 mm 4.7 in Bore 100 mm 3.9 in

Weights*

Operating Weight 4220 kg 9,304 lb

Power Train

Travel Speed (Forward or Reverse):

One Speed 11.6 km/h 7.2 mph Two Speed 16.6 km/h 10.3 mph

Hydraulic System

Hydraulic Flow – XHP:

Max. Loader Hydraulic Pressure 28 000 kPa 4,061 psi Max. Loader Hydraulic Flow 150 L/min 40 gal/min Hydraulic Power (calculated) 70 kW 94 hp

Standard Flow Mode:

Loader Hydraulic Pressure 23 000 kPa 3,335 psi Loader Hydraulic Flow 86.4 L/min 23 gal/min

*Operating Weight, Operating Specifications and Dimensions all based on

75 kg (165 lb) operator, all fluids, 2 speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, counterweights, 1981 mm (78 in) Dirt Bucket, Cat PC 14 x 17.5 tires and manual quick coupler (unless otherwise noted).

Operating Specifications

Rated Operating Capacity 1633 kg 3,600 lb Tipping Load 3266 kg 7,200 lb Breakout Force, Tilt Cylinder 3315 kg 7,308 lb Breakout Force, Lift Cylinder 2767 kg 6,100 lb

Cab

ROPS SAE J1040 MAY94,

ISO 3471:1994

FOPS SAE J1043 SEPT87,

ISO 3449:1992 Level I

FOPS Level II SAE J231 JAN81,

ISO 3449:1992 Level II

Service Refill Capacities

Chain Box, each side 8.6 L 2.3 gal Cooling System 14 L 3.7 gal Engine Crankcase 10 L 2.6 gal Fuel Tank 117 L 30.8 gal Hydraulic System 61 L 16 gal Hydraulic Tank 39 L 10.3 gal

Cat

272D XHP

SKID STEER LOADER

Specifications

Dimensions

1 Wheelbase 1386 mm 54.6 in 2 Length w/o Bucket 3119 mm 122.8 in 3 Length w/Bucket on Ground 3831 mm 150.8 in 4 Height to Top of Cab 2142 mm 84.3 in 5 Max. Overall Height 4086 mm 160.9 in 6 Bucket Pin Height at Max. Lift 3255 mm 128.1 in 7 Bucket Pin Height at Carry Position 200 mm 7.9 in 8 Reach at Max. Lift and Dump 747 mm 29.4 in

9 Clearance at Max. Lift and Dump 2456 mm 96.7 in 10 Ground Clearance 263 mm 10.4 in 11 Departure Angle 27° 12 Bumper Overhang Behind Rear Axle 1084 mm 42.7 in 13 Maximum Dump Angle 52° 14 Vehicle Width over Tires 1930 mm 76.0 in 15 Turning Radius from Center – Machine Rear 1874 mm 73.8 in 16 Turning Radius from Center – Coupler 1496 mm 58.9 in 17 Turning Radius from Center – Bucket 2310 mm 91.0 in 18 Max. Reach w/Arms Parallel to Ground 1249 mm 49.2 in 19 Rack Back Angle at Max. Height 83° 20 Bucket Pin Reach at Max. Lift 371 mm 14.6 in

MANDATORY EQUIPMENT

 Quick Coupler, Mechanical or Electric  Seat Belt, 50 mm (2 in) or 75 mm (3 in)

COMFORT PACKAGE

 Enclosed ROPS with Heat (C3):

Cup Holder, Radio Ready, Air Ride Seat, Air Conditioner with Heater and Defroster, Side Windows, Door (Glass or Polycarbonate)

HYDRAULIC PERFORMANCE PACKAGE

 H3:

XHP Hydraulics, Dual Direction Electronic Self Level (raise and lower),

Work Tool Return to Dig, Work Tool Positioner, Electronic Snubbing (Lift)

STANDARD EQUIPMENT

ELECTRICAL

 12 volt Electrical System  100 ampere Alternator  Ignition Key Start/Stop Switch  Lights:

Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen

Working Lights, Two Adjustable Front Halogen Lights, Dome Light

 Backup Alarm  Heavy Duty Battery, 1,000 CCA

OPERATOR ENVIRONMENT

 Gauges:

Fuel Level, Hour Meter

 Operator Warning System Indicators:

Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engages, Regeneration – Engine Emissions

 Cloth Seat, Air Suspension  Fold in Ergonomic Contoured Armrest  Control Interlock System, when operator leaves seat or armrest raised:

Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages

 ROPS Cab, Enclosed, Tilt Up  FOPS, Level I  Top, Rear and Side Windows  Headliner, Deluxe  Floor Mat  Interior Rear View Mirror  12 volt Electric Socket  Horn  Hand (Dial) and Foot Throttle, Electronic with Decel Feature  Advanced Machine Information and Control System (AMICS)

POWER TRAIN

 Cat

C3.8, Turbo, Tier 4 Interim (Stage IIIB) Certified Engine

 Air Cleaner, Dual Element, Radial Seal  S·O·S

Sampling Valve, Hydraulic Oil

 Filters, Cartridge-type, Hydraulic  Filters, Cartridge-type, Fuel and Water Separator  Radiator/Hydraulic Oil Cooler (side-by-side)  Spring Applied, Hydraulically Released, Parking Brakes  Hydrostatic Transmission, 2 Speed (standard)  Four Wheel Chain Drive, 14 x 17.5 Tires

OTHER

 Engine Enclosure, Lockable  Extended Life Antifreeze, –37° C (–34° F)  Machine Tie Down Points (4)  Support, Lift Arm  Hydraulic Oil Level Sight Gauge  Radiator Coolant Level Sight Gauge  Radiator, Expansion Bottle  Cat ToughGuard™ Hose  Auxiliary, Hydraulics, Continuous Flow  Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release  Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm  Electrical Outlet, Beacon  Belly Pan Cleanout  Counterweights  Variable Speed Demand Fan

OPTIONAL ATTACHMENTS

 Beacon, Rotating  Engine Block Heater – 120V  Oil, Hydraulic, Cold Operation  Paint, Custom  AM/FM/Weather Band Receiver with CD Player and Auxiliary Input Jack

272D XHP Skid Steer Loader

AEHQ6568 (01-12)

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com

Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

112