Milnor 36021 V5J Specifications
36021 V5J
y
80 LB. (36KG) CAPACITY
IGID-MOUNT WASHER-EXTRACTOR
R
FLOOR REQUIREMENT 12” MINIMUM
RECOMMENDED ▼,
SPECIFICATION SHEET
LEGEND
Cold water inlet, .75” (19 mm)
C
NPT
Drain to rear, 3” (76 mm) pipe
D
socket joint
E Main electrical connection
Anchor bolt holes, .8125”
F
(21 mm) diameter
Hot water inlet, .75” (19 mm)
H
NPT
L1 Standard soap chute
L2 Liquid supply inlets
MECHANICAL SPECIFICATIONS
Capacity – lbs (kg)
Cylinder Diameter x Depth – ins (mm)
Door Opening – ins (mm)
Cylinder Volume – cu. ft. (L)
Machine Dimensions
(W x D x H) – ins (mm)
Shipping Dimensions
(W x D x H) – ins (mm)
Motor – HP (kW)
Wash Speeds – RPM
Distribution Speed – RPM
Extraction Speeds – RPM
Extraction G-Force
Static Weight – lbs (kg)
Max. Dynamic Load RMS - lbs (kg)
Frequency (Hz) 9.03
(Required)
Water Pressure
– psi (bar) 10-75 (.68-5.1)
Water Valve CV Rating – gal/min (L/min) 5.8 (22)
Minimum Recommended Distance
Between Machines – ins (mm)
B22SS10011/10312 Page 1 of 2
80 (36)
36 x 21 (914 x 533)
18 (457)
12.37 (350)
43.38 x 53 x 67
(1102x1346x1702)
85 x 66 x 77
(2159 x 1676 x 956)
7.5 (5.59)
33-43
65
385-542
150
1920 (871)
2122 (963)
12 (305)
ELECTRICAL SPECIFICATIONS
Voltage Running
Amps
Fuse
(Amps)
Circuit Breaker
(Amps)
208-220/3/60 9 FRN20 20
220/3/50 9 FRN20 20
240/3/60 9 FRN20 20
380/3/50-60 5.7 FRS15 15
415/3/50 4.5 FRS15 15
480/3/60 4.5 FRS15 15
See Fuse and Wire Size manual MAEFUSE1BE for safety information.
See dimensional drawing for complete details.
▼
It is the sole responsibility of the owner/user to assure that the floor and/or any
other supporting structure exceeds not only all applicable building codes, but also
that the floor and/or any other supporting structure for each washer-extractor or
group of washer-extractors has sufficient strength and rigidity (i.e., a natural or
resonant frequency many times greater than the rotational machine speed with a
reasonable factor
including the weight of the water and goods, and including the published 360º
rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the
factory for additional machine data for use by a structural engineer.
of safety) to support the weight of all the fully loaded machine(s)
W
36021 V5J
80 LB. (36KG) CAPACITY
IGID-MOUNT WASHER-EXTRACTOR
R
SPECIFICATION SHEET
Standard Features:
®
• RinSave
• 7 speeds
• E-P PLUS
water saving technology
(2 wash, 1 distribution, 1 RinSave, 3 extract)
®
programmable controller
• Back-lit LCD display
• Single-motor inverter drive
• Tall, lifting ribs
• Tapered roller bearings
• High M.A.F. (Mechanical Action Factor)
• Large cylinder perforations
• Fresh-water flushing chemical manifold
• Auto tension V-belt drive
• Six (6) liquid chemical injection ports
• Control reads in English/second language
• 5-year limited warranty on frame, cylinder & shell
hy Purchase Milnor?
• RinSave
more efficient rinsing. BENEFIT: Saves water, energy, and time.
• Larger cylinder volume than most competitive, similar sized washer-extractors
provides greater productivity. More linen washed per day, or fewer hours required
to process. BENEFIT: Saves labor.
• Faster process times reduce fabric wear, promoting longer linen life!
BENEFIT: Saves linen replacement costs.
• Tall perforated ribs provide excellent lifting.
BENEFIT: Greater mechanical action leads to better wash quality.
• 150-G high extract provides excellent moisture removal. Lower extract speeds
are available for uniforms, delicate textiles and blended fabrics.
BENEFIT: Better extraction saves dryer fuel.
• E-P Plus Controller with back-lit LCD display allows operator to choose formulas
from real words, not codes. Standard controller features English/Spanish (other
languages optional). Controller also provides diagnostic and error messages.
Shortens training time of new employees.
BENEFIT: Fewer operator errors.
• Superior product support through local, highly-skilled dealers.
BENEFIT: Faster repairs mean less downtime.
®
water saver in conjunction with large cylinder perforations provides
Contact Milnor for your local, authorized dealer:
Pellerin Milnor Corporation
P.O. Box 400 ● Kenner, LA 70063
t: 504-467-9591 ● f: 504-468-3094
Optional Features:
• Steam
• 5 compartment flushing
supply injector
• Prison package
Safe chemical injection
Superior cylinder design
Solid industrial frame
B22SS10011/10312 Page 2 of 2
Loading...