Milnor 30022 X8J User Manual

UNSURPASSED WASH QUALITY THOUGHTFUL, RELIABLE DESIGN

Milnor’s X-Series suspended washer-extractors range in capacity

from 60-170 lbs. (27-77 kg). Available in either E-P Plus

®

or Mark VI®

controls, Milnor’s X-Series offers you savings and programming flexibility–

without compromising the wash quality you expect from a Milnor.

Read more to see how this suspended washer-extractor product line

is ideal for your commercial or industrial laundry application.

30022 X8J with

®

control

E-P Plus

42032 X7W with

®

control

Mark VI

Save Labor

Milnor’s X-Series control options (E-P Plus® and Mark VI®) allow the operator advanced flexibility by manually creating or altering
formulas, which are guided by the controls and promote accurate, proper washing. The display notifies the operator of key
benchmarks (wash step, time remaining, etc.), which increases productivity and reduces downtime. Milnor’s tall rib construction and

precise cylinder speeds provide excellent MAF (Mechanical Action Factor), which expedites the interchange of wash chemistry and

water, for quicker washing and rinsing. The X-Series cleans the goods properly the first time, so your laundry and staff can continue
to be efficient.

Save on Linen Replacement Costs

The second highest expense in a laundry is the cost of the linen (or to replace it). Milnor’s X-Series can help you extend your linen life with
its safe chemical injection system. Chemicals are injected in the rear of the machine (unlike certain brands where chemicals are injected
near the front of the machine at eye-level), then diluted and flushed into the sump. This prevents raw chemistry from coming into direct
contact with the linen or the stainless steel. In addition to the chemical injection system, the X-Series’ spacious wash cylinders
provide more room for lift and drop action and for goods to open up and absorb wash and rinse water - ensuring goods get clean the

first time, reducing rewashes and linen fatigue.

Save Energy

Milnor’s X-Series is highly efficient, reducing your utility costs. The frequency inverter drive allows the motor to reach maximum
extraction speed more efficiently, thereby reducing peak electricity amperage draw compared to multi-speed motor machines. Bigger

cylinder perforations provide (1) better wash quality by promoting excellent interchange of the goods with water and chemistry, (2)

better rinsing by allowing rinse water to freely interact with the goods, and (3) better extraction by allowing water to escape from
goods easily and quickly. The cylinder design minimizes wasteful rewashes and reduces drying time, all resulting in lower energy costs.

Save Water

Milnor’s efficient X-Series is also eco-friendly. Simple hot and cold water inlets are used to quickly fill the washer without fill level
overshoot (machines with multiple valves can overfill a machine). A third water inlet is used to thoroughly dilute chemicals so that
raw chemicals do not directly contact and damage linens. Accurate water levels promote proper washing and prevent wasting water.

Save Money (Total Cost of Ownership)

Milnor’s dynamically tuned suspension features a cutting-edge design that employs a unique, two-point suspension system. The
center of mass is located where an imbalance would occur. With SmoothCoil™ Suspension System, constructed of highly-
engineered fabric and rubber layered coils that provide low natural frequencies, vibration is constantly isolated (delivering smooth
operation and performance). Dynamic forces are evenly applied resulting in: minimum vibration, smooth extraction, less wear and
tear, and longer machine life. Tapered roller bearings have a large contact area - spreading force and contributing to long life. Front
and rear bearings are fixed in the same housing, preventing damaging misalignment. Like all Milnor machinery, X-Series machines
typically last longer because of their legendary ruggedness, thoughtful design, and dependable quality.