Milnor 30015 V7J User Manual

30015 V7J

g

40 LB. (18KG) CAPACITY

IGID-MOUNT WASHER-EXTRACTOR

R

FLOOR REQUIREMENT 12”

MINIMUM RECOMMENDED ▼,

SPECIFICATION SHEET

LEGEND

C Cold water inlet, .75” (19 mm) GHT

Drain to rear, 3” (76 mm) pipe socket

D

joint

E Main electrical connection

Anchor bolt holes, .875” (22 mm)

F

diameter

H Hot water inlet, .75” (19 mm) GHT

L1 Standard soap chute

L2 Liquid supply inlets

Hot water (chemical flushing), .75”

W

(19 mm) GHT

MECHANICAL SPECIFICATIONS

Capacity – lbs (kg) 40 (18)
Cylinder Diameter x Depth – ins (mm) 30 x 15 (762 x 381)
Door Opening – ins (mm) 15.5 (393.7)
Cylinder Volume – cu. ft. (L) 6.14 (174)
Machine Dimensions

(W x D x H) – ins (mm)
Shipping Dimensions
(W x D x H) – ins (mm)

34.5 x 45.8 x 54
(876 x 1162 x 1372)
40 x 60 x 60
(1016 x 1524 x 524)

Motor – HP (kW) 5 (3.72)
Wash Speeds – RPM 38-43
Distribution Speed – RPM 65
Extraction Speeds – RPM 542-685
Extraction G-Force 200

Static Weight – lbs (kg) 1134 (514)
Max. Dynamic Load RMS –lbs (kg) 

1432 (650)

Frequency (Hz) 11.5

(Required)

Water Pressure

– psi (bar) 10-75 (.68-5.1)

Water Valve Cv Rating – gal/min (L/min) 5.8 (22)

Minimum Recommended Distance
Between Machines – ins (mm)

6 (152)

B22SS1009/12456 Page 1 of 2

ELECTRICAL SPECIFICATIONS

Voltage Running

Amps

Fuse

(Amps)

Circuit Breaker

(Amps)

220/3/50 7 FRN20 20
208, 240/1/60 9, 8 FRN20 20
208, 240/3/60 8, 7 FRN20 20
380/3/50-60 4.5 FRS15 15
415/3/50 4.5 FRS15 15
480/3/60 3.5 FRS15 15

See Fuse and Wire Size manual MAEFUSE1BE for safety information.

See dimensional drawing for complete details.

▼

It is the sole responsibility of the owner/user to assure that the floor and/or any



other supporting structure exceeds not only all applicable building codes, but also
that the floor and/or any other supporting structure for each washer-extractor or
group of washer-extractors has sufficient strength and rigidity (i.e., a natural or
resonant frequency many times greater than the rotational machine speed with a
reasonable factory of safety) to support the wei
including the weight of the water and goods, and including the published 360º
rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the
factory for additional machine data for use by a structural engineer.

ht of all the fully loaded machine(s)

W

30015 V7J

40 LB. (18KG) CAPACITY

IGID-MOUNT WASHER-EXTRACTOR

R

SPECIFICATION SHEET

Standard Features:

®

• RinSave

• 7 speeds

• E-P PLUS

water saving technology

(2 wash, 1 distribution, 1 RinSave, 3 extract)

®

programmable controller

• Back-lit LCD display

• Single-motor inverter drive

• Tall, lifting ribs

• Tapered roller bearings

• High M.A.F. (Mechanical Action Factor)

• Large cylinder perforations

• Fresh-water flushing chemical manifold

• Auto tension V-belt drive

• Six (6) liquid chemical injection ports

• Control reads in English/second language

• 5-year limited warranty on frame, cylinder & shell

hy Purchase Milnor?

• Larger cylinder volume than most competitive similar sized washer-extractors

provides greater productivity. More linen washed per day, or fewer hours required
to process. BENEFIT: Saves labor.

• Greater cylinder perforated-area generates better wash quality, better rinsing and

better extraction. BENEFIT: Better extraction saves dryer fuel.

• Faster process times reduce fabric wear, promoting longer linen life!

BENEFIT: Saves linen replacement costs.

• High perforated ribs provide excellent lifting.

BENEFIT: Greater mechanical action leads to better wash quality.

• 200-G high extract provides excellent moisture removal. Lower extract speeds

are available for uniforms, delicate textiles and blended fabrics.

BENEFIT: Better extraction saves dryer fuel.

• E-P Plus Controller with back-lit LCD display allows operator to choose formulas

from real words, not codes. Standard controller features English/Spanish (other
languages optional). Controller also provides diagnostic and error messages.
Shortens training time of new employees.

BENEFIT: Fewer operator errors.

• Superior product support through local, highly-skilled dealers.

BENEFIT: Faster repairs mean less downtime.

Contact Milnor for your local, authorized dealer:

Pellerin Milnor Corporation

P.O. Box 400 ● Kenner, LA 70063

t: 504-467-9591 ● f: 504-468-3094

Optional Features:

• Steam

• 3 compartment flushing

supply injector

• Prison package

Safe chemical injection

Superior cylinder design

Solid industrial frame

B22SS1009/12456 Page 2 of 2