Miller TurboLite™ Personal Fall Limiter and
Twin Turbo
™
Fall Protection System
• Available in 6- and 9-foot lengths
• Lightweight units minimize worker fatigue
• Arrests a fall within inches
• Twin Turbo offers 100% tie-off fall protection
For more information contact your nearest Miller distributor or call Honeywell Technical Service at 800/873-5242
Miller TurboLite
Never Need A Shock-Absorbing
Personal Fall Limiters (PFL)
Cost-effective, compact and lightweight, Miller
TurboLite Personal Fall Limiters make the need for
shock-absorbing lanyards obsolete.
• Reduces fall clearance requirements
• Available in 6-ft and 9-ft lengths to meet the needs of a
wide variety of applications
• Extremely compact and lightweight, comparable to a shockabsorbing lanyard
• Attaches directly to the back D-ring of a harness for
increased mobility
• High-impact nylon housing and abrasion-resistant webbing
provide long service life
• Integral swivel prevents lifeline from twisting
• Rated for up to a 400 lb. (181.4 kg) worker
• Twin models available for 100% tie-off
• Meets all applicable OSHA, ANSI, and CSA requirements.
Lanyard Again!
The benefits address your safety concerns and
positively impact your bottom line:
• Workers no longer need to "switch-out" equipment to
maintain a safe fall distance
• Using the proper equipment when fall clearance changes
reduces risk
• Increases productivity by keeping workers on the job longer
• Miller Turbolite PFLs are competitively priced with shockabsorbing lanyards keeping safety costs in line
NEW!
6-foot length
Miller 6-foot
TurboLite
• Ideal replacement for a 6-ft
shock-absorbing lanyard
• Models start at just 1.9 lbs
(0.86 kg)
Learn more at www.millerfallprotection.com For more information contact your nearest Miller distributor or call Honeywell Technical Service at 800/873-5242
9-foot length
Miller 9-foot
TurboLite PFL
• Provides 9-ft of working
length, an ideal solution for
scaffolding and order picker
applications
• Lightest 9-ft unit on the
market – Models start at just
2.3 lbs (1.0 kg)
Effective solution for
applications with limited
fall clearance.
The unique 6-foot (1.8 m) and 9-foot
(2.74 m) TurboLite PFLs require
less fall clearance than traditional
shock-absorbing lanyards instantly
arresting a free fall within inches.
REQUIRES LESS
FALL CLEARANCE
PREVENTS
TRIPPING HAZARD