MikroTik RouterBOARD 1100 User Manual
RouterBOARD 1100
User's Manual
Copyright and Warranty Information
Copyright and Trademarks. Copyright MikroTikls SIA. This manual contains information protected by copyright
law. No part of it may be reproduced or transmitted in any form without prior written permission from the
copyright holder. RouterBOARD, RouterOS, RouterBOOT and MikroTik are trademarks of MikroTikls SIA. All
trademarks and registered trademarks appearing in this manual are the property of their respective holders.
Hardware. MikroTik warrants all RouterBOARD series equipment for the term of fifteen (15) months from the
shipping date to be free of defects in materials and workmanship under normal use and service, except in case
of damage caused by mechanical, electrical or other accidental or intended damages caused by improper use
or due to wind, rain, fire or other acts of nature.
To return failed units to MikroTik, you must perform the following RMA (Return Merchandise Authorization)
procedure. Follow the instructions below to save time, efforts, avoid costs, and improve the speed of the RMA
process.
1. If you have purchased your product from a MikroTik Reseller, please contact the Reseller company
regarding all warranty and repair issues, the following instructions apply ONLY if you purchased your
equipment directly from MikroTik in Latvia.
2. We do not offer repairs for products that are not covered by warranty. Exceptions can be made for
RB1000 and RB1100.
3. Out-of-warranty devices and devices not covered by warranty sent to Mikrotikls will be returned to
the sender at sender's cost.
RMA Instructions are located on our webpage here: http://rma.mikrotik.com
Manual. This manual is provided “as is” without a warranty of any kind, expressed or implied, including, but
not limited to, the implied warranty of merchantability and fitness for a particular purpose. The manufacturer
has made every effort to ensure the accuracy of the contents of this manual; however, it is possible that it may
contain technical inaccuracies, typographical or other errors. No liability is assumed for any inaccuracy found
in this publication, nor for direct or indirect, incidental, consequential or other damages that may result from
such an inaccuracy, including, but not limited to, loss of data or profits. Please report any inaccuracies found to
support@mikrotik.com
2
USER'S MANUAL ............................................................................................................................................................... 1
COPYRIGHT AND WARRANTY INFORMATION ................................................................................................................... 1
SYSTEM BOARD VIEW AND LAYOUT ................................................................................................................................. 3
SPECIFICATIONS ................................................................................................................................................................ 4
HARDWARE GUIDE ........................................................................................................................................................... 4
MEMORY AND STORAGE DEVICES ................................................................................................................................................. 4
INPUT/OUTPUT PORTS ............................................................................................................................................................... 5
LEDS ...................................................................................................................................................................................... 5
USER'S GUIDE ................................................................................................................................................................... 5
ASSEMBLING THE HARDWARE ...................................................................................................................................................... 5
POWERING ............................................................................................................................................................................... 6
BOOTING OPTIONS .................................................................................................................................................................... 6
ROUTERBOOT ................................................................................................................................................................... 7
BOOT LOADER CONFIGURATION ................................................................................................................................................... 7
BOOT LOADER UPGRADING ......................................................................................................................................................... 8
PRIMARY BOOT LOADER ............................................................................................................................................................. 9
ROUTEROS FUNCTIONS .................................................................................................................................................... 9
HEALTH MONITOR ..................................................................................................................................................................... 9
FIRMWARE INFORMATION ........................................................................................................................................................... 9
FIRMWARE SETTINGS ................................................................................................................................................................. 9
SOFTWARE RESET .................................................................................................................................................................... 10
APPENDIX ....................................................................................................................................................................... 10
CONNECTOR INDEX .................................................................................................................................................................. 10
BUTTON INDEX ....................................................................................................................................................................... 11
ETHERNET CABLES ................................................................................................................................................................... 11
SERIAL NULL-MODEM (CONSOLE) CABLE WITH LOOPBACK .............................................................................................................. 11
J402 SERIAL PORT PINOUT ........................................................................................................................................................ 11
RouterBOARD 1100/AH Series User's Manual
3
System Board View and Layout
You can download the board dimensions and case design files (PDF and DXF) from www.routerboard.com
4
Specifications
RouterBOARD 1100/AH
CPU
RB1100: MPC8544 800MHz
RB1100AH: P2010 1066MHz
RB1100AHx2: P2020 1066MHz dual core CPU with IPsec acceleration
Memory
SODIMM slot, no onboard module
Boot loader
RouterBOOT
Data storage
onboard NAND memory chip
Ethernet
Thirteen 10/100/1000 Mbit/s Ethernet ports supporting Auto-MDI/X
MiniPCI slot
-
Expansion
-
CompactFlash slots
One microSD card slot on board, accessible by opening the case
Serial port
One DB9 RS232C asynchronous serial port
LEDs
Power and User LED
Beeper
+
Power at the board
Power jack: 12-24VDC; PoE on Ether13: 12-24VDC
Power at the case
IEC C14 jack: 110-220VDC
Fans
JP1202 and JP1204 - 12V; 0,2A max.
JP1201 and JP1203 - 3,3V; 0,3A max.
Only one Fan in each pair will rotate, other will start when first fails.
Only one pair can be connected at the same time (two fans).
Dimensions
Board: 135 mm x 291 mm
1U rackmount case: 44 x 176 x 442 mm
Weight
365g board only, 1275g assembled with case
Temperature
Operational: -20°C to +65°C (-4°F to 149°F)
Humidity
Operational: up to 70% relative humidity (non-condensing)
Power consumption
12W min/25W max
Hardware Guide
Memory and Storage Devices
Memory
There is no onboard memory, but the device has a SODIMM slot for one DDR2 module, it is recommended to
use modules with at least 667MHz (PC-4200). The RB1100 device supports modules of up to 2GB, but due to
software limitations, RouterOS will be able to use only 1.5GB of it.
microSD slot
The board has one microSD card slot which supports microSD and microSDHC cards for expanding the storage
in RouterOS
Loading...