Page 1
wAP LTE kit
wAP LTE kit
The wAP LTE is a small weatherproof wireless access point with a built in cellular modem that
supports 2G, 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and
access the LTE network from your phone or any other wireless device. The wAP LTE also has one
10/100 Ethernet LAN port for your wired devices.
The weatherproof device can be mounted outside your
house, in the vehicle, on your porch or anywhere else where
you need wireless access from your phone or computer. It
also includes a desktop stand so you can put it inside the
building near a window.
LTE cards are connected to two internal antennas with u.FL
connectors, so if you want, you can unplug the connectors
and add your own external LTE antenna for larger coverage.
Unit has the several powering options - 9-30 V PoE-in by
Ethernet port, DC jack and Automotive connector, very handy
in mobile devices like car, bus or train.
Three versions are available:
RBwAPR-2nD&R11e-LTE includes LTE modem that
supports International LTE bands 1,2,3,7,8,20,38 and 40.
RBwAPR-2nD&R11e-LTE-US includes LTE modem that
supports LTE bands 2,4,5 and 12, mostly used by mobile
operators in United States, Canada and Latin America.
RBwAPr-2nD is shipped with without LTE card installed
(empty miniPCI-e slot), so you can use your own LTE card.
24V 0.8 A
power adapter
Included
Screw kit
PoE injector
wAP LTE kit
0.35 m 4pin
Automotive
adapter cable
stand
2x plastic strapsDesktop
Mount base
1
Page 2
wAP LTE kit
Specifications
Product code RBwAPR-2nD&R11e-LTE RBwAPR-2nD&R11e-LTE-US RBwAPR-2nD
CPU QCA9531
CPU nominal frequency 650 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 1
Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain
Wireless regulations Specific frequency range will be limited by country regulations
Wireless antenna gain 2 dBi
LTE antenna gain 2 - 4.5 dBi (with uFL connector)
Antenna beam width 360°
Wireless chip model QCA9531
LTE modem Included Included
LTE category 4 (150Mbps Downlink, 50Mbps Uplink) -
3G category
2G category Class12 - -
SIM slot 1
PoE in Ye s
Supported input voltage 9 V - 30 V (Passive PoE)
Dimensions 185 x 85 x 30 mm
Operating temperature -40°C .. +60°C tested
License level 4
Operating System RouterOS
Max Power consumption 8 W
R7 (21Mbps Downlinks, 5.76Mbps
Uplink)
R8 (Cat24 - 42.2Mbps Downlink)
R7 (Cat14 - 21.1Mbps Downlink)
None (slot for miniPCI-e LTE card
available)
-
Wireless specifications
RATE Tx (dBm) Rx (dBm)
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71
wAP LTE kit
Supported bands
RBwAPR-2nD&R11e-LTE
LTE (FDD) bands 1(2100)/2(1900)/3(1800)/7(2600)/8(900)/20(800)
LTE (TDD) bands 38(2600)/40(2300)
3G bands 1(2100)/2(1900)/5(850)/8(900)
2G bands 2(1900)/3(1800)/5(850)/8(900)
RBwAPR-2nD&R11e-LTE-US
LTE (FDD) bands 2(1900)/4(1700)/5(850)/12(700)
3G bands 2(1900)/5(850)
2
Page 3
wAP LTE kit
For home use On the pole
On public transport
Wall
wAP LTE kit
3
Page 4
wAP LTE kit
wAP LTE kit
Wall
4
Loading...