MikroTik RBwAPGR-5HacD2HnD operation manual
1.
2.
3.
4.
5.
6.
wAP R ac
wAP R ac
The wAP R ac is a small weatherproof device with integrated antennas and miniPCIe slot for your modem.
Quickstart
Use a Phillips head screwdriver to loosen the screw, which secures the bottom lid (see ).wAP R ac#Bottom Lid
Install your desired modem into the miniPCIe slot (see miniPCIe usage)
Insert the SIM card into the slot with the chip facing up.
Choose your powering solution, please see the section for possibilities.wAP R ac#Powering
Open network connections on your PC and search for the SSID that begins with "MikroTik".
Connect to the wireless network, open in your web browser to start the configuration.http://192.168.88.1
User name: a and there is no password by default you will be logged in automatically to the Quick Set screen.
dmin
Update the device by clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to
ensure the best performance and stability. Must have a valid SIM card inserted.
To manually update the device, please gohttps://mikrotik.com/download
Choose ARM packages for this device and download it to your PC.
Upload downloaded packages to the WebFig "Files" menu and reboot the device.
Updatingyour RouterOS software to the latest version will ensure the best performance, stability, and security updates.
To personalize your wireless network, SSID can be changed in the fields "Network Name";
Choose your country on the left side of the screen in the field "Country", to apply country regulation settings.
Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols.
Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next
time.
Click on the "Apply Configuration" to save changes.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
Scan QR code and choose your preferred OS.
Install and open application.
By default, the IP address and user name will be already entered.
Click Connect to establish a connection to your device through a wireless network.
Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.
An advanced menu is available to fully configure all necessary settings.
1.
2.
3.
4.
5.
6.
Mounting
The device can be mounted in several ways: pole, wall, ceiling or it can be placed in specially designed Mikrotik holder which comes with the package. The
package also includes a drill hole template with detailed mounting instructions, to help you with the Ethernet cable installation and attachment to a ceiling
or a wall. Steel bracket to put on the other side of a dropdown ceiling tile and two screws and wall anchors. Zip ties or steel clamps for mounting on the
pole.
The IP rating scale for this device is IP54. When mounting outdoors, please ensure that any cable openings are directed downwards. We recommend
using the POE injector and proper grounding with Cat6 shielded cable. When using and installing this device please pay attention to Maximum Permissible
Exposure (MPE) safety distance with a minimum of 31 cm between the radiator and your body.
Mounting on the mast or pole:
* It's recommended to use electrical tape to increase friction between materials.
Mount plastic tie straps to steel bracket guiding them through holes.
Mount bracket to the device.
Secure them with a screw.
Mount and align the device on the pole or mast.
Guide Ethernet cable through the opening and connect to the Ethernet port.
Close bottom latch and secure with a screw.
It's recommended to secure Ethernet cable to the pole using zip ties. With the distance from the device approximately 30 cm.
1.
2.
3.
4.
5.
6.
7.
8.
Mounting unit on the wall:
Use included a template to mark spots for drilling holes. And if needed for Ethernet cable. Align accordingly, it will depend on how the device will
be mounted finally.
Insert dowels if needed, depends on wall structure and material.
Place included a steel bracket on the wall.
Use screws to secure it in the place.
Extend your Ethernet cable through the opening and connect to the Ethernet port.
Mount the device on the steel bracket
Secure it in place with the screw.
Close bottom latch.
Avoid mounting the device on the low ground spot, as you won't be able to attach and close the bottom latch.
1.
2.
3.
1.
2.
3.
4.
Mounting on the ceiling:
A Special bracket is included in the package to mount on the drop ceiling. As it consists of two parts, to be attached on both sides of the ceiling tile.
Use the template to mark spots for holes.
Place both mounting brackets on the spot.
Secure them together using screws.
Continue assembling in the same manner if mounting on the wall.
Extend your Ethernet cable through the opening and connect to the Ethernet port.
Mount the device on the steel bracket.
Secure it in place with the screw.
Close bottom latch.
Bottom Lid
The bottom lid is secured in place with the captive screw.
Use the Philips PH2 screwdriver to unscrew it, but do not remove the screw completely.
Pull the cover in the opposite direction from the device to remove it.
Loading...