MikroTik RBwAP2nD User Manual

wAP

wAP

The wAP (wall AP) is a small weatherproof wireless access point for your mobile
devices, perfect for installation outside your house, in the garden, on your porch or
anywhere else where you need wireless access from your phone or computer.

The device has one 10/100 Ethernet port and can be
mounted on a wall to provide basic internet access in any
location. It looks unobtrusive and sleek, available in two
colours - black (RBwAP2nD-BE) and white (RBwAP2nD).

It is waterproof and can be attached to any external wall from
the inside of the case - so that it is not easy to detach from
it’s mounting location. The bottom door can also be secured
with a special screw, which can only be opened by the
owner.

It is also possible to run the Ethernet cable directly behind
the unit, to inside the wall, there is a special opening on the
back of the case. This way, the unit doesn’t attract attention
and blends into any environment.

24V 0.38A

Power adapter

Included

Screw kit

PoE injector

wAP

2x plastic straps

Ceiling mount

base

1

Specifications

Product code RBwAP2nD (white), RBwAP2nD-BE (black)

CPU nominal frequency 650 MHz

CPU core count 1

Size of RAM 64 MB

10/100 Ethernet ports 1

Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain

Antenna gain 2 dBi

Antenna beam width 360°

Wireless chip model QCA9533

wAP

PoE in Ye s

Supported input voltage 11 V - 57 V (Passive PoE and 802.3af/at with unshielded cable)

Dimensions 185 x 85 x 30 mm

License level 4

Operating System RouterOS

CPU QCA9533

Max Power consumption 4 W

Wireless specifications

RATE Tx (dBm) Rx (dBm)

1MBit/s 22 -96

11MBit/s 22 -89

6MBit/s 20 -93

54MBit/s 18 -74

MCS0 20 -93

MCS7 16 -71

wAP

2