MikroTik RBQRTG-2SHPnD User Manual
QRT 2
High power integrated antenna
The QRT 2 is a rugged outdoor at panel antenna, with a built in
RouterBOARD. The device has a 17dBi antenna and a super high
power 2GHz wireless transmitter.
Inside is a new dual chain wireless device, with high performance, high
output power wireless transmitter, and a Gigabit Ethernet port, to fully
utilize the benet of 802.11n high speed wireless.
Easy to use and quick to deploy, QRT is ideal for point to point links.
Model QRT 2 (RBQRTG-2SHPnD)
Features 1 Ethernet, Gigabit, High power, Dual chain
CPU Atheros AR7242 400MHz network processor
Memory 64MB DDR onboard memory
Data storage 128MB NAND memory chip
Ethernet One Gigabit port with Auto-MDI/X
Wireless Built in 2GHz 802.11b/g/n (AR9582)
Extras beeper, signal and status LEDs, voltage and temperature sensors
Expansion -
Power options PoE: 8-30V DC on Ether1 (Non 802.3af).
Dimensions 309x320x50mm
Max consumption 19W at 24V
OS MikroTik RouterOS, Level4 license (supports wireless CPE/PtP and AP mode)
Included
QRT wireless device, precision mounting bracket, U bolts, pole clamp, screw kit,
24V 1.2A power adapter, Gigabit PoE injector
Frequencies 2.3-2.6 GHz
Gain 17dBi
VSWR 1.43 : 1
3 dB Beam-Width, H-Plane 22°
3 dB Beam-Width, E-Plane, typ. 22°
Polarization Dual, Vertical and horizontal
Port to Port Isolation -50 dB
Cross Polarization, min. -25 dB
Front to Back Ratio, min. 30 dB
TX power / RX sensitivity
TX/RX at MCS0 35dBm / -96dBm
TX/RX at MCS7 30dBm / -78dBm
TX/RX at 6Mbit 35dBm / -96dBm
TX/RX at 54Mbit 31dBm / -80dBm
Frequency range 2300-2600MHz
QRT 2
Loading...