MikroTik RBLHGR&R11e-LTE6 operation manual

LHG LTE6 kit

LHG LTE6 with factory installed R11e-LTE6 modem.

Quickstart

1. While holding the unit by its central column, apply force to the
tab, which holds the latch closed, until the latch pops open.

2. Insert the SIM card into the slot.

3. Assemble case by attaching legs to the base of the unit,
please see Case assembly paragraph.

4. Mount unit in your desired place, please see Mounting
paragraph.

5. Connect an Ethernet cable to the Ethernet port, connect the
other end of the Ethernet cable to the included PoE injector.

6. Plug the PoE injector into your network switch or ISP internet
outlet.

7. Plug the included power supply into the PoE injector to start
up the device. please see powering paragraph.

8. Set LAN computer IP configuration to automatic (DHCP).

9. Once connected to the wireless network open http://192.168.88.1 in your web browser to start the
configuration.

10. User name: admin and there is no password by default you will be logged in automatically to the Quick Set
screen.

11. We recommend clicking the “Check for updates” button on the right side and updating your RouterOS
software to the latest version to ensure the best performance and stability.

12. To personalize your wireless network, SSID can be changed in the fields “Network Name”;

13. Choose your country on the left side of the screen in the field “Country”, to apply country regulation
settings.

14. Set up your wireless network password in the field “WiFi Password” the password must be at least eight
symbols.

15. Set up your router password in the bottom field “Password” to the right and repeat it in the field “Confirm
Password”, it will be used to login next time.

16. Click on the “Apply Configuration” to save changes.

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for
your MikroTik home access point.

1. Scan QR code and choose your preferred OS.

2. Install and open application.

3. By default, the IP address and user name will be already entered.

4. Click Connect to establish a connection to your device through a wireless
network.

5. Choose Quick setup and application will guide you through all basic
configuration settings in a couple of easy steps.

6. An advanced menu is available to fully configure all necessary settings.

See mikrotik.com/products for the latest version of this document. Document #53364 Modified on: 20.NOV.2019

Case assembly

1. Attach the two legs to the LHG case by sliding them onto the respective sides, legs are different and
cannot be exchanged (when looking at the product place it that cover for Ethernet port is in front of you, leg
marked R is for the right side, leg marked L is for the left side).

2. Snap the assembled LHG unit to the grid in the appropriate central location.

3. Fix the two legs in place with included two self thread screws (Phillips screwdriver PH2).

The package also contains a grounding cable connector and a 5-degree angle adapter, for easier up or downward
tilt adjustment. See Mounting paragraph.

Opening the case cover

Optional - to access the miniPCIe slot, the opening of the unit top cover is required. As an opening tool, you can
use a large size flat head screwdriver or a small coin. Be extremely cautious when opening, because the incorrect
opening of the clip can break it off!

Mounting and configuration of this device should be done by a qualified person.

Follow these steps:

Additional Caution when lifting up the cover, do not force it with sharp objects.

See mikrotik.com/products for the latest version of this document. Document #53364 Modified on: 20.NOV.2019

1. Follow this order when opening the
unit.

2. Insert a screwdriver into the first slot.

3. Turn the screwdriver, until one side pops open.
Continue in the above order.

4. Lift cover to access the card.

miniPCIe slot usage

The device is equipped with a miniPCIe slot and has already installed an LTE modem. One SIM slot is provided for
use together with a miniPCIe modem. The SIM slot is not usable separately.

Replacing a miniPCIe module should be done by a qualified person, please follow safety precautions when
handling electrical equipment:

1. Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical
discharge (ESD) damage;

2. Open the upper cover as shown on instruction previously;

3. The antenna is located underneath PCB;

4. Locate the miniPCIe slot on the PCB and remove two factory attached screws;

5. Attach provided a thick thermal pad to the card, and install the card into miniPCIe slot so that thermal pad
is between PCB and card;

6. Insert your desired card;

7. The secure card in place using previously removed two screws;

8. Attach the grey uFL connector to the MAIN antenna connector of the modem, attach the black cable to the
secondary (or AUX) connector;

9. Attach a thinner thermal pad to the top of the card;

10. Reassemble.

After reassembly, slide in the SIM card from your mobile operator into the SIM slot, with the chips facing up as
shown on the port label. The slot accepts miniSIM (2FF).

Powering

The device can be powered from 12-57 V 802.3af/at sources and also Passive PoE injectors (one power supply
and PoE injector are included).

Maximum power consumption 6 W.
Connecting to a PoE Adapter:

1. Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter;

2. Connect an Ethernet cable from your local network (LAN) to the PoE adapter;

3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.

See mikrotik.com/products for the latest version of this document. Document #53364 Modified on: 20.NOV.2019