MikroTik RBLDF-2nD User Manual

LDF 2

LDF 2

The LDF (Lite dish feed) is an outdoor wireless system with a built in antenna, meant to be installed

on satellite oset dish antennas. The dish will act as a reflector, amplifying the signal.

This means you can use any available satellite TV dish with an oset

mount to quickly deploy powerful long range wireless links. The

oset mount is universal at 40 mm diameter, and the LDF can easily

be placed inside it. Since the LDF itself is a tiny little package, it

makes shipping and deployment simple and low cost.

Dish is not included.

Using large enough dishes, it is possible to
obtain antenna amplification of 30 dBi or more.
All it takes is to find a spare satellite dish with
an oset mount, and put your LDF device. The
device comes preinstalled with RouterOS and is
ready to use.

24 V 0.38 A

adapter

LDF 2

PoE injector

1

Specifications

Product code RBLDF-2nD

CPU QCA9533 650 MHz

Memory 64 MB

Storage type Flash

Storage size 16 MB

Ethernet One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X

Wireless QCA9533, wireless built-in 2.4 GHz 802.11b/g/n, dual chain

Wireless regulations Specific frequency range can be limited by country regulations

Frequency range 2412 - 2484 MHz

Power options Passive PoE input 10-28 V

LDF 2

Consumption 7 W

Internal antenna gain 10 dBi

Antenna beam width 60°

Dimensions

Operating temperature -40°C .. +70°C tested

LEDs 8x LEDs (7x user LEDs)

License level 3

Operating system RouterOS

84mm x 84mm x 115mm

Wireless specifications

Rate Tx Rx

1MBit/s 26 -100

11MBit/s 26 -93

6MBit/s 28 -94

54MBit/s 24 -78

MCS0 28 -94

MCS7 23 -75

LDF 2

2