MikroTik RBGroove-52HPn User Manual

Groove 52HPn

2GHz / 5GHz outdoor unit

Our smallest outdoor series model - a fully featured wireless
RouterBOARD powered by RouterOS. Weatherproof, durable and
ready to use. It has one 10/100 Ethernet port with PoE support and a
built in wireless radio. It has software selectable 2 or 5GHz wireless
mode, and high output power!

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput
is possible! It has a built-in N-male connector, and pole attachment
points, so you can attach it to an antenna directly, or use a standard
antenna cable. LED signal indicators make it easy to install and align.

CPE or AP versions are available. Groove runs RouterOS with all it’s
features.

CPU AR9342 600Mhz

Memory 64MB

Ethernet One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU up to 2030

Wireless 5 or 2GHz (software selectable) radio, N-male antenna connector

Wireless
regulations

Extras Reset switch, Beeper, Voltage monitor, Temperature monitor

LEDs 5 wireless signal LEDs, ethernet activity LED (congurable)

Power Passive 9-30V PoE only. 16KV ESD protection on RF port. Up to 0,19A at 24V (4.56W)

Dimensions 177x44x44mm, 193g. Must be mounted with ethernet pointing down

Operating temp. -30C to +70C

RouterOS

Package contains Groove unit, mounting loops, PoE injector, 24V power adapter

Specic frequency range may be limited by country regulations

52HPn: Level3 license (station or ptp),
A-52HPn: Level4 license (AP, station or ptp)

24V 0.8A Adapter PoE injector

5GHz 2GHz

RX sensitivity 802.11a

RX sensitivity 802.11n

TX power 802.11a 27dBm @ 6Mbps to 22Bm @ 54 Mbps 27dBm @ 6Mbps to 24Bm @ 54 Mbps

TX power 802.11n 26dBm @ MCS0 to 22dBm @ MCS7 27dBm @ MCS0 to 23dBm @ MCS7

Frequency range 4900-5920MHz 2400MHz-2500MHz

–93 dBm @ 6Mbps to -77 dBm
@ 54 Mbps

–93 dBm @ MCS0 20MHz to –76 dBm
@ MCS7 40MHz

–93 dBm @ 6Mbps to -77 dBm
@ 54 Mbps

–93 dBm @ MCS0 20MHz to –76 dBm
@ MCS7 40MHz

Groove 52HPn