NetMetal ac²
Our toughest long-range AP, now with
dual-band support!
NetMetal ac²
More power and advanced features, with the same
design philosophy as its predecessors – the new
NetMetal ac² AP is sturdy, reliable, easy to use and
extremely capable. This is the best way to add IPsec
hardware acceleration to your backhaul link! We have
added an out-of-the-box 2.4/5 GHz dual-band support –
no need for additional tinkering!
NetMetal ac² can handle massive loads, as it features
an improved 4-core CPU and 256 MB RAM. There is a
miniPCIe slot for an LTE or other wireless modules and
an SFP port for fiber. The NetMetal ac² can be a very
adaptable addition for all kinds of setups.
The enclosure has an IP rating of IP54 with protection against
splashing from any angle, but it can still be opened and closed with
one hand. Very handy in rough environments!
Choose NetMetal ac² – the Mars rover of longrange access points!
mANT30 mANT 15s mANT 19s mANT30 PA
Two RP-SMA connectors allow adding an antenna of your choice. If necessary, you can adapt the NetMetal
ac² for lower range use with such antennas as our HGO-antenna-OUT screw-on omni antenna unit. It
provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band.
NetMetal ac²
HGO-antenna-OUT
2
NetMetal ac²
Specifications
Product code RBD23UGS-5HPacD2HnD-NM
Architecture ARM 32 bit
CPU IPQ-4019
CPU core count 4
CPU nominal frequency 716.8 MHz
Dimensions 143 x 247 x 48 mm
License level 4
Operating system RouterOS
Size of RAM 256 MB
Storage size 16 MB
Storage type SPI flash
Tested ambient temperature -40°C .. +70°C
Powering
Number of DC inputs 2 (DC jack, PoE-IN)
PoE in 802.3 af/at
Poe in input voltage 24 - 57 V
DC jack input voltage 12 - 57 V
Max power consumption 28 W
Max power consumption without attachments 12 W
Wireless
2.4 GHz 5 GHz
Max data rate 300 Mbit/s 866.7 Mbit/s
Number of chains 2 2
Connectors 2*
Connector type RP-SMA RP-SMA
Supported protocols 802.11 b/g/n 802.11 a/n/ac
Interface model IPQ-4019 IPQ-4019
Wi-Fi generation Wi-Fi 4 Wi-Fi 5
* combined for both bands
NetMetal ac²
3
NetMetal ac²
Ethernet
Number of 1G Ethernet ports 1
Fiber
SFP DDMI Yes
SFP ports 1
Peripherals
Number of USB ports 1
USB power reset Yes
USB slot type USB type A
Max USB current (A) 1
miniPCIe slots 1
Number of SIM slots 1
SIM slot type Micro SIM
Other
PCB temperature monitor Yes
Voltage monitor Yes
Certification & Approvals
Certification FCC, IC, IP54
NetMetal ac²
4
NetMetal ac²
Wireless specifications
2.4 GHz TX (dBm) RX (dBm)
1 MBit/s 30 -100
11 MBit/s 30 -94
6 MBit/s 30 -96
54 MBit/s 27 -80
MCS0 30 -96
MCS7 26 -75
Included parts
5 GHz TX (dBm) RX (dBm)
6 MBit/s 30 -96
54 MBit/s 27 -80
MCS0 30 -96
MCS7 26 -75
MCS9 23 -72
48 V 0.95 A
power adapter
Gigabit PoE
injector
Metal ring (one) K-25 screw kit DIN mount (K-27)
NetMetal ac²
5
Loading...