MikroTik RB960PGS User Manual
hEX PoE
hEX PoE is a five port gigabit ethernet router
for locations where wireless connectivity is not
required. The device has a USB 2.0 port and a
SFP port for adding optical fiber connectivity. The
ports 2-5 can power other PoE capable devices
with the same voltage as applied to the unit.
hEX PoE
It is aordable, small and easy to use, but at the
same time comes with a very powerful 800MHz
CPU, capable of all the advanced configurations
that RouterOS supports.
Less power adapters and cables to worry about!
Max current is 1A per port if input voltage is
12-30V, 450mA if 31-57V, Ethernet ports are
shielded.
RB960PGS can power 802.3af/at devices if 48V DC input is used (unit comes with 24v power supply,
so you would have to purchase 48v power supply separately to support this). Unit provides max
current 450mA for each port regardless device power class (doesn’t support PoE powered device
classification).
hEX PoE
1
Specifications
Product code RB960PGS
CPU QCA9557
CPU nominal frequency 800 MHz
CPU core count 1
Size of RAM 128 MB
10/100/1000 Ethernet ports 5
PoE in Yes, passive
Supported input voltage 12 - 57 V
hEX PoE
Power output
PCB temperature monitor Ye s
Voltage monitor Ye s
USB slot Ye s
Dimensions 114 x 137 x 29mm
License level 4
Operating System RouterOS
Max Power consumption 9 W
On ports 2-5, Output: 1A max per port; 2A max total (12-30v),
450mA max per port; 1,8A max total (31-57v)
Performance test results
QCA9557(800Mhz) Max possible throughput RouterOS v6.38rc9
1518 byte 512 byte 64 byte
Mode Configuration
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 161.9 1,966.1 401.5 1,644.5 542.3 277.7
Bridging 25 bridge filter rules 143.2 1,739.0 145.5 596.0 146.2 74.9
Routing none (fast path) 161.9 1,966.1 396.3 1,623.2 521.7 267.1
Routing 25 simple queues 161.9 1,966.1 217.2 889.7 216.0 110.6
Routing 25 ip filter rules 74.6 905.9 78.0 319.5 76.5 39.2
1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration
was maxed out
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration,
dierent configurations most likely will result in lower results
24V 2.5A Power
adapter
hEX PoE
Included
2
Loading...