MikroTik RB951Ui-2nD User Manual
hAP
hAP
This small home access point is the perfect device for homes
or small oces where all you need is a wireless AP and a few
wired devices connected. Based on our popular RB951-2n, the
new hAP is an improvement in many areas.
- Dual chain wireless 2.4GHz
- 650MHz CPU
- 64MB of RAM
- Passive PoE output on port 5
- USB port for 3G/4G modem
The device is very small and will look
good in any home or oce, wall mounting
anchor holes are provided.
The device can be powered from the
power jack or with passive PoE from a PoE
injector. The power adapter is included. The hAP is preconfigured, so all you need to
do, is plug in the internet cable, the power, and start using the internet by connecting
to the MikroTik network.
hAP
1
Product code RB951Ui-2nD
CPU nominal frequency 650 MHz
CPU core count 1
Size of RAM 64 MB
hAP
IncludedSpecifications
10/100 Ethernet ports 5
Wireless
Antenna gain 1.5dBi
Antenna beam width 360°
Wireless chip model QCA9531-BL3A-R
PoE in Ye s
PoE out Yes (Ether5)
Supported input voltage 6V - 30V (Jack or Passive PoE)
Extras USB 2.0 Type A full size port, 1A
Dimensions 113 x 89 x 28mm
License level 4
Operating System RouterOS
CPU QCA9531-BL3A-R
Max Power consumption 5W
Built-in 2.4 GHz 802.11b/g/n,
dual-chain
24V 0.8A Power
adapter
Wireless specifications
RATE Tx (dBm) Rx (dBm)
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71
hAP
2
Loading...