MikroTik RB911G-5HPacD-NB User Manual
NetBox
The NetBox is a dual chain outdoor AP/CPE/Point-to-Point device with
RP-SMA connectors for antennas, and a cable hood for protection against
moisture. This device supports the new 802.11ac standard for increased
wireless speed (866Mbit datarate, and 20/40/80MHz channels).
The case can be opened with one hand, and is protected against the
elements. Ethernet and a Grounding wire exits are provided on the bottom,
behind a protective door.
Comes with a mounting loop for tower/pole mounting, and a separate DIN
rail mount is also provided. Package also includes a PoE injector and power
supply unit.
Order code RB911G-5HPacD
CPU QCA9557 720MHz network processor
Memory 128MB DDR onboard memory
Ethernet One Gigabit port with Auto-MDI/X
Wireless QCA9882 5GHz 802.11ac, 2x RP-SMA connectors, Dual chain
Connector type RP-SMA Female (outside thread)
Extras beeper, signal and status LEDs, voltage and temperature sensors
Supported
channels
Power options PoE: 8-30V DC on Ether1 (Non 802.3af). Consumption: 12W at 24V
Dimensions 246x135x50mm; Weight: 390g
OS MikroTik RouterOS, Level4 license
Kit includes Netbox outdoor unit, PoE injector, mounting loop, DIN rail mount, monting ring
20/40/80MHz
Mounting loops
Gigabit PoE injector
Metal ring
DIN mount
Wireless transmit/receive speciîš¿cations
TX/RX at MCS0 30dBm / -96dBm
TX/RX at MCS7 27dBm / -77dBm
TX/RX at MCS9 22dBm / -72dBm
TX/RX at 6Mbit 31dBm / -96dBm
TX/RX at 54Mbit 27dBm / -81dBm
Frequency range 4920-6100 MHz, Operating range limited by Country Regulations
Using the optionally available Flexguide cable, you
can use the Basebox with any 3rd party antenna
NetBox
Loading...