Miele G5570SCVi User Manual

Product and Cut-out Dimensions Page 1 o f 3

Dimension G 5570 SCVi Fully Integrated Model Dishwasher

ADA Compliant Series Dishwasher

Location Codes
C - Cutout 1 3/8” x 1 3/4” (34 mm x 35 mm) for water, drain and electric pass-through.

Adjust according to water and drain location.

D - 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E - 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects front terminal or can be

hardwired.

W - 5 foot flexible water intake hose with a 3/8” compression fitting nut connects lower center rear.

Notes

All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 2 o f 3

Dimension G 5570 SCVi Fully Integrated Model Dishwasher

dishwasher to align with the surrounding cabinets.

Height:

Determined using the following

TKH Toe kick height

Maximum panel height: 30 3/8 (772 mm)

ADA Compliant Series Dishwasher

Custom Panel Installations

Some Miele dishwashers do not come equipped with a front panel. These dishwashers are designed to accept a
custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the

Width: 23 7/16” (598 mm) in all cases
Thickness: ¾” (19 mm) in all cases

calculation:

Panel Height = HTC – TKH

HTC = Height to the underside of countertop

=

Note: Control panel is along the top edge of
the unit. It is not visible when the unit is closed.
A handle MUST be located on the front panel in
order to open the unit.

”
Minimum panel height: 25 5/8” (650 mm)
Maximum panel weight: 21 Pounds (9.5 kg)

GFVI Installations

Miele offers pre-fabricated stainless steel panels for all fully integrated units. These panels are designed for
various toe-kick heights and offer a choice of handle options.

Drawing is not to scale Specification Sheets OJS 11012011