Miele G4570SCVi User Manual

Product and Cut-out Dimensions Page 1 o f 3

Dimension G 4570 SCVi Fully Integrated Slimline Dishwasher

Location Codes
C – Cutout 2 1/4” x 4” (58 mm x 102 mm) for water, drain and electric pass-through.

Adjust according to water and drain location.

D - 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E - 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects lower left rear.
W - 5 foot (1.5 meter) “Double Waterproof” flexible water intake hose connects lower center rear.

Notes

All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11032011

Product and Cut-out Dimensions Page 2 o f 3

Dimension G 4570 SCVi Fully Integrated Slimline Dishwasher

Height:

Determined using the following

TKH Toe kick height

Maximum panel height: 30 5/16 (770 mm)

Custom Panel Installations

Some Miele dishwashers do not come equipped with a front panel. These dishwashers are designed to accept a
custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the
dishwasher to align with the surrounding cabinets.

Width: 17 1/2” (445 mm) in all cases
Thickness: ¾” (19 mm) in all cases

calculation:

Panel Height = HTC – TKH

HTC = Height to the underside of countertop

=

Note: Control panel is along the top edge of
the unit. It is not visible when the unit is closed.
A handle MUST be located on the front panel in
order to open the unit.

”
Minimum panel height: 25 9/16” (650 mm)
Maximum panel weight: 21 Pounds (9.5 kg)

GFVI Installations

Miele offers pre-fabricated stainless steel panels for all fully integrated units. These panels are designed for
various toe-kick heights and offer a choice of handle options.

Drawing is not to scale Specification Sheets OJS 11032011