Miele G4275SCSF User Manual

Product and Cut-out Dimensions Page 1 o f 3

Classic G 4275 SCSF Prefinished Fully Integrated

Dishwasher

Location Codes
C - Cutout 1 3/8” x 1 3/4” (34 mm x 35 mm) for water, drain and electric pass-through.

Adjust according to water and drain location.

D - 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E - 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects front terminal or can be

hardwired.

W - 5 foot flexible water intake hose with a 3/8” compression fitting nut connects lower center rear.

Notes

All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 2 o f 3

Classic

4275 SCSF Prefinished Fully

Integrated

Dishwasher

(

(

)

p

p

G

Panel Prefinished
Width: 23 7/16”
Thickness: ¾” (19 mm)
Height: 30 1/8” (765 mm)
Calculating the toe kick height
30 1/8” – HTC = TKH

HTC = Height to the underside of countertop

598 mm)

TKH = Toe kick height (Panel height is
configured for a 4” toe kick)

Note: Control panel is along the top edge of
the unit. It is not visible when the unit is closed.
A handle MUST be installed on the front
in order to open the unit.

GFVI Installations

Miele offers pre-fabricated stainless steel panels for all fully integrated units. These panels are designed for
various toe-kick heights and offer a choice of handle options.

anel

Drawing is not to scale Specification Sheets OJS 11012011