Miele G4205SC User Manual

Product and Cut-out Dimensions Page 1 o f 3

Classic G 4205 SC Prefinished Dishwasher

Location Codes
C - Cutout 1 3/8” x 1 3/4” (34 mm x 35 mm) for water, drain and electric pass-through.

Adjust according to water and drain location.

D - 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E - 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects front terminal or can be

hardwired.

W - 5 foot flexible water intake hose with a 3/8” compression fitting nut connects lower center rear.

Notes

All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 2 o f 3

Classic G 4205 SC Prefinished Dishwasher

Miele Prefinished

Dishwasher

Panel and control Prefinished
Width: 23 7/16” (598 mm)
Thickness: ¾” (19 mm)
Height: 30 3/16” (767 mm)
Calculating the toe kick height
30 3/16” – HTC = TKH

HTC = Height to the underside of countertop
TKH = Toe kick height

Drawing is not to scale Specification Sheets OJS 11012011