Page 1
36” Downdraft Hood
Proud Mounting
DA 6891
Specification Sheets TRS 02202018
8mieleusa.com
Page 2
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
SPECIFICATIONS
DA 6891 w/DAG600 — Item DA6891+internal
DA 6891 w/DAG1000 — Item DA6891+external
Overall Unit Width 36” (915 mm)
Overall Unit Height (Unextended) 2511/16” (652 mm)
Overall Unit Height (Extended) 41
Overall Canopy Height 16” (406 mm)
DA 6891
Features:
• Very sleek and modern look
• Touch on glass controls
• LED ClearView lighting with dimmer
functionality (1 x 6W)
• Telescopic downdraft system raises
16” over cooktop surface
• Four fan speeds (incl. intensive)
• Dishwasher-safe stainless steel lter
hidden behind black glass panels
• Option of 500 CFM (DAG 600)
internal blower or 1000 CFM (DAG
1000) external blower
• Vented or recirculating
• Delayed shutdown 5 or 15 minutes
Overall Unit Depth 4
Built-In
Minimum Opening Width 31
Minimum Opening Depth 4
Minimum Opening Height (Including Countertop) 25
Fan
Fan Speeds 4
Maximum CFM
Duct
Duct Diameter
Electrical
Electrical Requirements 120V, 60Hz,15A
Power Cable Ventilation system must be hard wired
Shipping
Shipping Weight 74 lbs (33.6 kg)
Shipping Dimensions 42
Support
Call Miele 800.843.7231
Miele Website
20/20 Link
11
/16” (1,058 mm)
3
/4” (120 mm)
15
/16” (812 mm)
1
/4” (108 mm)
13
/16” (656 mm)
DA 6891 w/DAG 600 g 500 CFM
DA 6891 w/DAG 1000 g 1000 CFM
DAG 600 g 6” (150 mm)
DAG 1000 g 10” (254 mm)
7
/8” W x 305/8” H x 107/8” D
8www.mieleusa.com
82020technologies.com
STANDARD ACCESSORIES
Single Support Bracket for
One Cutout Installation
Two Support Brackets for
One or Two Cutout(s) Instal-
lation
DA 6891
Page 2 of 12
Page 3
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
OPTIONAL ACCESSORIES
DAG 600
500 CFM Internal Blower
DUU 2900
Recirculation kit for use
with DAG 600
DAG 1000
1000 CFM External Blower
R1200
Reducing collar limits air
ow to less than 300 CFM
with DAG 600
DKF18-1
Replacement OdorFree
charcoal lter for DUU 2900
DA 6891
Page 3 of 12
Page 4
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
PRODUCT SPECIFICATIONS
DA 6891
Page 4 of 12
Page 5
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
OPTION 1
ONE CUTOUT INSTALLATION SPECIFICATIONS
Cutout Dimensions for One (1) Cutout
- Proud Mount Installation
DA 6891
Page 5 of 12
Page 6
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
OPTION 1
INSTALLATION SPECIFICATIONS
One Cutout Options with Support
Bracket(s) (Included)
Single Support Bracket
A support bracket is mounted on the downdraft extractor. It serves as a
support for the cooktop when the downdraft extractor and the cooktop are
installed in a common cutout j.
Two Angle Support Brackets
The following situation, the support bracket should be replaced with two small angle
brackets. The downdraft extractor and cooktop are installed in a common cutout,
but the cutout for the cooktop is narrower k.
DA 6891
Page 6 of 12
Page 7
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
OPTION 2
TWO CUTOUT INSTALLATION SPECIFICATIONS
Cutout Dimensions for Two (2) Cutout
- Proud Mount Installation
- Allows for Installation with Proud Mounted
Downdraft in Combination with Flush or
Proud Mounted Combisets and Cooktops
DA 6891
Page 7 of 12
Page 8
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
OPTION 2
INSTALLATION SPECIFICATIONS
Two (2) Cutout Option with Support
Brackets (Included)
Two Angle Support Brackets
Two small angle brackets are mounted on the downdraft extractor. They serve as
a support for the downdraft extractor when the downdraft extractor and cooktop are
installed in two separate cutouts.
DA 6891
Page 8 of 12
Page 9
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
EXTERNAL BLOWER DAG 1000
(Optional Accessory)
DA 6891
Page 9 of 12
Page 10
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
EXTERNAL BLOWER DAG 1000 - CONTINUED
(Optional Accessory)
DA 6891
Page 10 of 12
Page 11
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
Recirculation Kit DUU 2900
(Optional Accessory)
Ventilation Cutout
DA 6891
Page 11 of 12
Page 12
36” Downdraft Hood - Proud Installation
DA 6891 Levantar
Reducing Collar
(Optional Accessory)
If you would like to reduce the environmental impact of your ventilation
system by limiting the CFM output the Reducing Collar can be installed.
It reduces the air ow to less than 300 CFM in use with DAG 600. Check
local building codes for maximum CFM requirements.
Specification Sheets TRS 02202018
DA 6891
Page 12 of 12
Loading...