Miele DA 6891 Specification Sheet

DA 6891

36-inch downdraft ventilation hood
optional external or internal blower for maximum versatility.

EAN: 4002515823972 / material number: 10595910

Construction type

Downdraft extractor system •

Design

Color Stainless steel
Edge extraction •

Operating modes

• Striking design - telescopic canopy
36 1/8 (916) inches wide.

• Practical - 15-minute automatic
blower run-on

• Suitable for every home- vented or
recirculating

• For perfect functionality - accessories
for proper venting

Recirculated mode Convertible
OdorFree charcoal filter (order separately) DKF18-900

Control panel

Electronic controls •
Light-touch controls •
Power levels (number excl. Intensive) 3
Intensive setting •
Run-on time 15 mins. •
Hood in Motion •

Filter system

Dishwasher-safe grease filters 2

Lighting

Light intensity in Lx 280
Color temperature in K 4,000

Safety

Safety shut-off •
Single-ply safety glass (ESG) •

Technical data

Overall hood height for vented and external in in.(mm) 41 1/2 (1,052)
Overall hood height for recirculation in in.(mm) 41 1/2 (1,052)
Canopy width in in.(mm) 36 1/8 (916)
Height of hood canopy in in.(mm) 25 1/2 (646)
Depth of hood canopy in in.(mm) 13 7/8 (351)
Net weight in lbs. (kg) 60 (27.0)
Length of electrical wire in ft (m) 4 (1.5)
Standard plug fitted •
Total connected load in kW 0.35
Voltage in V 120
Fuse rating in A 10
Number of phases 1

Installation notes

Vent connection at top,rear,side,bottom •
Diameter of vent connection in in.(mm) 6 (150)

Standard accessories

Reducer from 150 to 125 mm Ø •

More information at www.MieleUSA.com

For further information please see next page...

DA 6891

36-inch downdraft ventilation hood
optional external or internal blower for maximum versatility.

DA 6881, DA 6891 Downdraft (Installation drawing)

1) The DAG 600 motor can be rotated for installation, so
exhaust air can be extracted upwards, left, right or
downwards.

2) The connection box can be positioned anywhere in the
cabinet. The DA 6891 can be mounted to the left, right or
behind the fan.

3) Cover for use with the DAG 1000 external fan. The DAG
600 or the cover for the DAG 1000 fan can also be installed
in the same position at the back of the appliance.

DA 6881, DA 6891 Downdraft (Installation drawing)

1) Stepped cut-out for granite or marble worktops

2) If downdraft system and hob are installed in separate cut­outs it is important to ensure sufficient stability of ridges.

DA 6881, DA 6891 Downdraft (Installation drawing)

1) Exhaust air can be extracted to the left or right

2) Exhaust air extraction downwards
a) Hob overlap
b) Hob cut-out

3) If a downdraft system and a hob are installed in separate
cut-outs it is important to ensure sufficient stability of ridges.
If the appliances is installed behind the downdraft system it
must be ensured that there is adequate space.