Page 1
30” Downdraft Hood
Flush Mounting
DA 6881 Levantar
Shown: KM 6375 with DA 6891 Flush Mounted
Please note: This information is subject to change
Specification Sheets TRS 09092019
8mieleusa.com
Page 2
30” Downdraft Hood
Flush Installation
SPECIFICATIONS
11
Overall Unit Dimensions 30” (762 mm) W x 25
Overall Canopy Height 16” (406 mm)
Built-In
Minimum Opening Dimensions 25
15
/16” (659 mm) W x 2513/16” (656 mm) H (Including Countertop) x 41/4” (108 mm) D
Fan
Fan Speeds 4
Maximum CFM
Duct
Duct Diameter
Electrical
Electrical Requirements 120V, 60Hz,15A
Power Cable Ventilation system must be hard wired
Shipping
Shipping Weight 63 lbs (28.6 kg)
Shipping Dimensions 36
Support
Call Miele (800) 999-1360
Miele Website
20/20 Link
/16” (652 mm) H (Unextended) x 43/4” (120 mm) D
DA 6881 w/DAG 600 g 500 CFM
DA 6881 w/DAG 1000 g 1000 CFM
DAG 600 g 6” (150 mm)
DAG 1000 g 10” (254 mm)
7
/8” W x 305/8” H x 107/8” D
8www.mieleusa.com
82020technologies.com
DA 6881 w/DAG600
Item DA6881+internal
DA 6881 w/DAG1000
Item DA6881+external
Page 2 of 10
Page 3
STANDARD ACCESSORIES
30” Downdraft Hood
Flush Installation
Single Support Bracket for
One Cutout Installation
OPTIONAL ACCESSORIES
DAG 600
500 CFM Internal Blower
Two Support Brackets for
One or Two Cutout(s) Instal-
lation
DUU 2900
Recirculation kit for use
with DAG 600
DAG 1000
1000 CFM External Blower
R2000
Reducing collar limits air
ow to less than 300 CFM
with DAG 600
DKF18-900
Replacement OdorFree
charcoal lter
(Used with DUU 2900)
Page 3 of 10
Page 4
PRODUCT SPECIFICATIONS
30” Downdraft Hood
Flush Installation
Page 4 of 10
Page 5
30” Downdraft Hood
Flush Installation
TWO INDIVIDUAL CUTOUTS INSTALLATION
SPECIFICATIONS
Cutout Dimensions for Two (2) Cutouts
- Flush Mount Installation
- Allows for Installation with Flush Mounted
Downdraft in Combination with Flush or
Proud Mounted Combisets and Cooktops
Page 5 of 10
Page 6
30” Downdraft Hood
Flush Installation
TWO INDIVIDUAL CUTOUTS INSTALLATION
SPECIFICATIONS
Cutout Dimensions for Two (2) Cutouts
- Flush Mount Installation
- Allows for Installation with Flush Mounted
Downdraft in Combination with Flush or
Proud Mounted Combisets and Cooktops
INSTALLATION SPECIFICATIONS
Two (2) Individual Cutout Support
Brackets (Included)
Two small angle brackets are mounted on the downdraft extractor. They serve as
a support for the downdraft extractor when the downdraft extractor and cooktop are
installed in two separate cutouts.
Two Angle Support Brackets
Page 6 of 10
Page 7
EXTERNAL BLOWER DAG 1000
(Optional Accessory)
30” Downdraft Hood
Flush Installation
Page 7 of 10
Page 8
EXTERNAL BLOWER DAG 1000 - CONTINUED
(Optional Accessory)
30” Downdraft Hood
Flush Installation
Page 8 of 10
Page 9
RECIRCULATION KIT DUU 2900
(Optional Accessory)
30” Downdraft Hood
Flush Installation
Ventilation Cutout
Page 9 of 10
Page 10
R2000
(Optional Accessory)
30” Downdraft Hood
Flush Installation
If you would like to reduce the environmental impact of your ventilation
system by limiting the CFM output the Reducing Collar can be installed.
It reduces the air ow to less than 300 CFM in use with DAG 600. Check
local building codes for maximum CFM requirements.
Specification Sheets TRS 09092019
Page 10 of 10
Loading...