Miele DA6290W User Manual

Product Dimensions
Decorator Wall Hood
DA6290W

Distance “S” is
determined by the
cooking surface

Page 1 of 2

Recirculation Vent

1 Air extraction mode
2 Recirculation mode

Location Codes

E - 110 Volt – 15 Amp 3 wire power supply
connects through top or rear of chimney.

O - Standard 110 Volt Outlet

- Offset from duct center line by 2”

Notes

All installations must be done in accordance
with local codes.

6” duct connects to blower system inside
chimney.

4, 5 Installation area;

For recirculation mode only 5.

Wall/ceiling area respectively for vent hole and
outlet installation.

Drawing is not to scale - Specification Sheets 010411

Product Dimensions
Decorator Wall Hood
DA6290W
Drilling diagram

Page 2 of 2

Notes

Center unit over cooking surface

Distance “S” is determined by the
cooking surface

(see hood instructions below for details)

Area behind mounting plates MUST be
reinforced using a minimum of ½”
plywood. Reinforcing material should be
affixed to structural wall members

Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances
between a cooktop and the bottom of the hood:

Non-Miele CooktopsMiele Cooktops

24” (610 mm)Electric Cooktops

26” (660 mm)Electric Barbeques and Fryers

Multiburners Gas cooktops
≤43,00 BTU (12.6 KW)
And no burner > 15,000 BTU (6KW)

30” (760 mm)All other gas cooktops

Drawing is not to scale - Specification Sheets 010411

30” (760 mm)26” (660 mm)

30” (760 mm)26” (660 mm)Single burner (Wok) ≤ 20,500 BTU (6 KW)