Midea MC-HF605 Instruction Manual

Ceramic Hob

Instruction Manual / Installation Manual

MODEL: MC-HF605

2

Congratulations on the purchase of your new Ceramic Hob.

We highly recommend that you spend some time to read this Instruction /
Installation Manual in order to fully understand how to install correctly and
operate your ceramic Hob.
For installation, please read the installation section.

Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.

Product Overview

Top View

Control Panel

1. max. 1200 W zone

2. max. 1800 W zone

3. max. 1200 W zone

4. max. 1800 W zone

5. Glass plate

6. ON / OFF

7. Control panel

1. ON/OFF control

2. Power regulating controls

3. keylock control

4. Timer regulating controls

3

Product Information

The microcomputer ceramic cooker hob can meet different kinds of cuisine
demands because of resistance wire heating, micro-computerized control and
multi-power selection, really the optimal choice for modern families.
The ceramic cooker hob centers on customers and adopts personalized design.
The hob has safe and reliable performances, making your life comfortable and
enabling to fully enjoy the pleasure from life.

• Read this guide, taking special note of the ‘Safety Warnings’ section.

• Remove any protective film that may still be on your ceramic hob.

Using the Touch Controls

• The controls respond to touch, so you don’t need to apply any pressure.

• Use the ball of your finger, not its tip.

• You will hear a beep each time a touch is registered.

• Make sure the controls are always clean, dry, and that there is no object (e.g. a

utensil or a cloth) covering them. Even a thin film of water may make the
controls difficult to operate.

Choosing the right Cookware

Do not use cookware with jagged edges or a curved base.

Make sure that the base of your pan is smooth, sits flat against the glass, and is

4

the same size as the cooking zone. Always centre your pan on the cooking zone.

Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.

Using your Ceramic Hob

To start cooking

• After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the ceramic hob has entered the state of standby
mode.

1. Touch the ON/OFF control，all the indicators

show “-“

2. Place a suitable pan on the cooking zone that

you wish to use.

• Make sure the bottom of the pan and the surface

Of the cooking zone are clean and dry.

3. Select a heat setting by touching the or

5

control.

• If you don’t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.

• You can modify the heat setting at any time
during cooking.

When you have finished cooking

1a. Turn the cooking zone off by scrolling down to “- “or touching and

control together.

1b. Turn the whole cooktop off by touching the ON/OFF control.

2. Beware of hot surfaces

“ H” will show which cooking zone is hot to touch. It will disappear when the

surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that
is still hot.

6

Locking the Controls

• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).

• When the controls are locked, all the controls except the ON/OFF control are
disabled.

To lock the controls

Touch the keylock control. The timer indicator will show “ Lo “

To unlock the controls

1. Make sure the ceramic hob is turned on.

2. Touch and hold the keylock control for a while.

3. You can now start using your ceramic hob.

When the hob is in the lock mode, all the controls are disable except the ON/OFF ,
you can always turn the ceramic hob off with the ON/OFF control in an emergency,
but you shall unlock the hob first in the next operation

Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic
hob. When an excessive temperature is monitored, the ceramic hob will stop
operation automatically.

Residual Heat Warning

When the hob has been operating for some time, there will be some residual
heat. The letter “ ”appears to warn you to keep away from it.

Auto Shutdown

Another safety feature of the hob is auto shut down. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times are shown in
the table below:

Power level

1 2 3 4 5 6 7 8 9

Default working timer (hour)

8 8 8 4 4 4 2 2 2