Micsig CP2100A, CP2100B User Manual

1 / 8

Micsig AC/DC Current Probes
CP2100 Series User Manual

Applies to

CP2100A/CP2100B

2 / 8

Safety Precautions

➢

The measuring circuit should be CAT II 600V or below.

➢

Do not measure bare conductor.

➢

Do not touch the conductor under test and the sensor head while
measuring.

➢

Do not operate in wet/damp conditions.

➢

Do not touch the instrument or the object under test with wet hands.

➢

Please use this product within the scope permitted by the terminal.

➢

Please use this product as required.

➢

Please ground the product through the USB power cable.

3 / 8

1. Introduction

The CP2100 series is a current probe that can measure both DC and AC. It is
a split-type design that is small and beautiful. It uses a standard BNC
interface for oscilloscopes or a multi-connector for adapters. The maximum
current that can be measured is 100Apk
(70Arms); it is divided into 2 models, CP2100A measurable bandwidth range
is DC~800KHz, CP2100B measurable bandwidth range is DC~2.5MHz,The
CP2100 series current probe has two optional ranges: 10A and 100A . With
automatic and manual zero adjustment, USB power supply, no additional
power supply, making measurement more convenient. Often used in motor
drive, power frequency, inverter, power supply, avionics and other fields.

2. Appearance