Operation Instructions
Thank you for purchasing this high-res olution multiscan color monitor. Please read this
guide thoroughly before installation.
FCC RA DIO FREQUENCY INTERFERENCE STATEMENT WARNIN G: (FOR
FC C CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These li mits are designed to provide
proper protection against harmful interference to a res idential installation. This monitor
generates, uses, and can radiate radio frequency energy. Harmful interference to radio
communication may result if it’s not properly installed and used. However, there is no
guarantee that interference will not occur in a paticular installation. If this monitor does
cause serious interference to radio or television reception, resetting the monitor may
resolve the problem. M oreover, users are encouraged to correct interference by doing
one or more of the following:
u Reorient or relocate the receiving antenna.
u Move the monitor and the receiver further aw ay from each other.
u Connect the monitor into an outlet on a circuit different from that to
which the receiver is connected.
u Consult your local dealer or an qualified technician.
FCC Warnin g:
To assure a continued FCC compliance, a user must use a grounded power supply cord
and the provided shielded video interface cable with bonded ferrite cores. Also, any
unauthorized changes or modifications to this monitor would void the user’s authority
to operate this device.
Note: If neces sary, shielded interface cables and the A.C. power cord must be used to
meet the emission level limits.
EMI Certification
The Class B digital apparatus meets a ll requirements of the Canadian InterferenceCausing Equipment Regulation.
Cet appareil numerique de class B respecte toutes les exigences du Reglement sur Ic
materiel brouilleur du Canada.
219-20-990067
Contents
Safety Precautions
Care and Maintenance
First Step
Front Panel Control
Using OSD Functions
Supporting Timi ng modes
Technical Information
......................................................................3
.........................................................1
..................................................2
......................................................4
..................................................5
................................................10
...........................................9
Safety Precautions
This monitor is manufactured and tested on the ground principle that a user’s safety
comes first. However, improper use or installation may not only damage the monitor
but endanger the user as well. As a safety precaution, go over the following WARNINGS carefully before installation, and keep this guide handy.
WARNINGS:
l This monitor should be operated only at the correct power sources indicated on
the label at the rear end of the monitor. If you are unsure of the power s upply in
your residence, consult your local dealer or power company.
l Do not try to repair the monitor yourself as it contains no user-serviceable parts.
The monitor should only be repaired by a qualified technician.
l Do not remove the monitor cabinet. There are high-voltage parts inside that may
cause electric shock to human bodies , even when the power cord is disconnected.
l Stop using the monitor if the cabinet is damaged. Have it checked by a service
technician.
l Put your monitor only in a clean, dry environment. Unplug the monitor immedi-
ately if it gets wet, and consult your service technician.
l Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry
cloth. Apply non-ammonia-based cleaner onto the cloth, not directly onto the
glass screen.
l Keep the monitor aw ay from magnetic objects, motors, TV s ets, and transformers.
l Do not place heavy objects on the cable or pow er cord.
l For PLUGGA BLE EQUIPMENT, the socket outlet should be installed near the
equipment and should be easily accessible.
1
Care and Maintenan ce
Care
l A void exposing your monitor directly to sunlight or other heat sources. Place
your monitor away from the sun to reduce glare.
l Put your monitor in a well ventilated area. Do not place anything heavy on top of
your monitor.
l Make certain that your monitor is installed in a clean and moisture-free area.
l Keep your monitor away from magnets, motors, trans formers, speakers, and TV
set s.
Safety Tips:
l If s moke, abnormal noise or odor come out of your monitor, switch off the power
immediately and call your service center.
l Never remove the rear cover of your monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
l Never try to repair the monitor yourself. Alw ays call your service center or a
qualified technician to fix it.
Note
This user’s manual contains graphics and information that is for reference purposes
only and is subject to change without notice.
2
First Step
Congratulation for purchasing this high-performance monitor! Please check all
accessories listed in the packing list.
Quick Installation
1. Conn ect video cable
Make s ure both the monitor and computer are powe red OFF. Connect the
video ca ble to the computer, then to
the monitor.
2. Connect pow er cord
Connect the power cord to a properly
grounded AC out let, then to the
monitor.
3. Power-ON computer and monitor
Power-ON the computer, then
Power-ON the monitor.
4. Windows user s: Setting the Timing
Mode (Resolution and Refresh Rate)
Example: 1280 x 1024 @ 60 Hz
Resolution: Right-click on the Windows
desktop > Properties >Settings > “Desktop Area”. Set the res olution.
Refres h Rate (vertical frequency): See
your graphic card’s user guide for
instructions.
3
Front Panel Control
ACTIVATE/EXIT OSD SELECT DESIRED FUN CTION
SCROLL DOWN/DECREASE LED INDICATER
SCROLL UP/INCREASE POWER ON/OFF
AC INPUT
VGA INPUT
AUDIO INPUT
EARPHONE
10
9
4
Using OSD Functions
1. Press the button to display the main menu shown below.
2. Press the or▼button to scroll to the desired menu option.
3. Press the button to select the menu option.
4. Press the or▼ button to select submenu option.
5. After making adjustment, press button to s ave changes and exit the screen.
Main Menu
Contrast/Brightness
Image Adjust
R
Color Temperature
BG
Advanced Menu
Setup Menu
Memory Recall
Audio Control
2 Select1 Exit
Cont rast : To adjust the foreground white level of screen image.
: increase contrast, ▼：decrease contrast
Shortcut : before displaying the menu, press the or▼button to adjust,
pres s button to toggle between contrast and brightness.
Bright ness : to adjust the background black level of screen image.
: increase brightness, ▼: decrease brightness.
5
Image Adjust
Auto Tune
H./V. Position
H. Size
Phase
2 Select1 Exit
Auto Tune : automatically sizes, centers, and fine tunes the video s ignal to eliminate
waviness and distortion. Press the button to obtain a sharper image.
NOTE: Auto tune works with most common video cards. If using this function does
not work on your monitor, low er the video refresh rate to 60 Hz and try again (See
computer or graphic card user guide to adjust refresh rate.) The panel may be
manually tuned us ing the horizontal and vertical phase controls shown below.
H/V Position : Press button to select H. or V. position.
Horizontal Position moves screen image left or right.
: moves s creen to right, ▼ : moves screen to left.
Press the button to toggle between H. or V. Position.
Vertical Position moves s creen image up or down.
: moves screen to up, ▼: moves screen to down.
H. Size : adjusts the w idth of screen image. ▼decreases width of screen image,
increases width of screen image.
Phase : fine tunes the video distortion. Press ▼or to adjust to user preference.
6
Color Temp
R
BG
Color Temperature Select
User Color
2 Select1 Exit
Color Temperature : provides four preset color adjus tments:9300K, 6500K, 5400K,
5000K for improved brightness and color saturation. Press button to select the
preset color.
9300K--Adds blue to screen image for cooler white.
6500K--A dds to screen image for warmer white and richer red.
5400K--Adds green to screen image for a darker color.
5000K--Adds blue and green to screen image for a darker color.
User Color :--Individual adjustments for red(R), green (G), blue(B).
1. Press button to set adjustment and select next color to adjust.
2. Press or▼ button to adjust selected color.
Advanced Menu
Sharpness
Information
2 Select1 Exit
Sharpnes s : adjusts the clarity of a non-SXGA (1280x1024) signal. Press or▼
button to adj ust.
Information : displays information regarding the current input signal coming from the
graphic card in your computer.
Note: See your graphic card user guide for more information about changing the
resolution and refresh rate.
7
Setup Menu
Language Select
OSD Position
OSD
OSD Temeout
2 Select1 Exit
Language Select : allow s the user to choose from available languages.
OSD Position : Press the button to select the horizontal or vertical OS D position.
Horizontal OSD Position horizontally repositions all OSD screens. moves OSD
right, ▼moves OSD left.
Vertical OSD Position vertically repositions all OSD screen. moves OSD up, ▼
moves OSD down.
OSD Timeout sets the length of time the Onscreen Display screen is displayed
before exiting.
Memory Recall : Return the adjustments back to factory settings. Press the button
to select the Memory Recall menu option.
Audio Control
-:
+:
1 Exit
*This menu is only available for monitors with the audio option.
Audio Control : increase volume, ▼decrease volume. Press▼or button to set
adjustments.
8
Sup porting Timing modes
V ESA
V ESA
V ESA
V ESA
V ESA
V ESA
V ESA
V ESA
MAC
V ESA
V ESA
V ESA
640 x 480 @ 60HZ
640 x 480 @ 72HZ
640 x 480 @75HZ
800 x 600 @ 56HZ
800 x 600 @ 60HZ
800 x 600 @ 72HZ
800 x 600 @ 75HZ
1024 x 768 @ 60HZ
1024 x 768 @ 70HZ
1024 x 768 @ 75 Hz
1280 x 1024 @ 60HZ
1280 x 1024 @ 75HZ
Warning : Do not s et the graphic card in your computer to exceed these maximum
refresh rates. Doing s o may result in permanent damage to your monitor.
9
Techn ical Information
LCD Type
Color filter
Glass surf.
Inpu t Signal Analog
Compatibility
Power
Audio
LCD Display Color
Viewin g Angle
Dimensions
Con trast Ratio
Brightne ss
Response Time
17.0” TFT
SXG A Active Matrix,0.264mm pixel pitch
RGB, vertical stripe
Antic-static & hard coating
RGB Analog (0.7 – 1.0V pp, 75 ohms)
Separate H/V (TTL) , Fh:30 – 80kH z, Fv:50 – 75Hz
1280x1024@ 60Hz (recommended)
100-240 VAC 50/60 Hz, 50Watts (Maximum)
350 – 20 KHz (option)
16.7M (8 bits/color)
CR 10
Horizontal -60° + 60°(typical)
Vertical -60° + 40°(typical)
432mm(W)x410mm(H)x330mm(D)
300 : 1 (typical)
230 cd/m2 (typical)
Tr=15 ms (typical)
Tf=35 ms (typical)
Active Dis play Area
Operating Condition s
Comp liance
337.92 mm x 270.34 mm
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ + 60°C
UL, TÜV/G S, CE, FCC-B, Energy Star.
Pow er Saving
Off : orange < 5 W, On : green , 50W (maximum)
LED modes
*All specifications are subject to change without notice.
10
Loading...