Microsoft 1403, WKS368, WC01 Users Manual

Xbox 360 Wireless Controller

Thanks for choosing the Xbox 360 Wireless Controller. Your wireless controller lets you experience
the ultimate in wireless freedom with the same precision, speed, and accuracy as a wired controller.
The Xbox 360 Wireless Controller features:

• 2.4-GHz wireless technology with nine-meter range.

• Integrated headset port.

• Adjustable vibration feedback for longer battery life.

The Xbox 360 Wireless Controller is for use exclusively with the Xbox 360™ video game and
entertainment system. For information about using the Xbox 360 Wireless Controller with a
particular game, see your game manual.

To enhance your experience with the wireless controller, try the Xbox 360 Rechargeable Battery
Pack and the Xbox 360 Play & Charge Kit. If you're looking to expand your wireless experience,
consider the Xbox 360 Universal Media Remote and the Xbox 360 Wireless Networking Adapter.

Before using this product, read this manual and the Xbox 360 console
manuals for important safety and health information. Keep all manuals for future reference. For
replacement manuals, go to www.xbox.com/support
Need More Help”).

The limited warranty covering this product is contained in the Xbox 360 Warranty manual (Volume

2).

Dispose of this product in accordance with local and national disposal regulations (if any), including
those governing the recovery and recycling of waste electrical and electronic equipment (WEEE).

Disposable Battery Safety

Improper use of batteries may result in battery fluid leakage, heating, or explosion. Released
battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if
swallowed. To reduce the risk of injury:

or call Xbox Customer Support (see ”If You

• Keep batteries out of reach of children.

• Do not heat, open, puncture, mutilate, or dispose of batteries in fire.

• Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and

alkaline batteries).

• Remove batteries if they are worn out or before storing for an extended period of time. Do not

leave batteries in the AA battery holder when it is not installed in the controller.

• If a battery leaks, remove all batteries, taking care to keep the leaked fluid from touching your

skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush skin with
water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a
damp paper towel, or follow the battery manufacturer's recommendations for cleanup.

• Dispose of old, depleted, or leaking batteries in accordance with the battery manufacturer’s

instructions and Local and National Disposal Regulations.

Set Up Your Xbox 360 Wireless Controller

Before you can use your Xbox 360 Wireless Controller with your Xbox 360 console, you need to:

1. Insert a battery pack. The wireless controller uses only the AA battery pack (provided) with AA
disposable batteries or the Microsoft Xbox 360 Rechargeable Battery Pack (sold separately).

2. Introduce the controller to the console by wirelessly connecting the two.

Insert Batteries

To insert batteries into the wireless controller AA battery pack:

1. Press the tab on the top of the AA battery pack and pull down to detach it from the controller.

2. Insert two new AA (LR6) batteries with their positive (+) and negative (–) ends positioned as
shown on the underside of the battery pack. For best performance, AA rechargeable batteries are
not recommended.

3. Slide the AA battery pack back into place on the controller and push in to lock.

Remove Controller Batteries Aboard Aircraft

Before boarding any aircraft or packing the wireless controller in luggage that will be checked,
remove any batteries from the wireless controller. The wireless controller can transmit radio
frequency (RF) energy, much like a cellular telephone, whenever batteries are installed.

Connect Your Controller

Up to four controllers, wired and wireless, can be actively connected to a console at one time. Each
connected controller gets a quadrant on the Ring of Light. Before you can connect a wireless
controller, at least one quadrant must be free (unlit). To disconnect a wireless controller, press and
hold the wireless controller Xbox Guide button for three seconds, and then turn it off. For a wired
controller, disconnect the cable connector.

To connect your wireless controller to your console:

1. Press and hold down the Xbox Guide button until the controller powers on.